Stroj za robne trakove

FELDER G400

Stanje: novo, Bester Preis: Fodpfxjdnxydo Abvofw 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm Ffedpfx Abov S Hy Asvew tilt adjustment 0–45° electrically controlled with digital readout blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Stanje: zelo dobro (rabljeno), Oprema: dozator, Električna nastavitev višine in kota žage; predrezilo. Ffjdpfx Ajw Ix Alebvew Lahko nas pokličete ali pišete. Govorimo in pišemo v nemščini in ruščini. Sporočila lahko pošljete tudi v angleščini.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Cormak MJ45-KB4 sliding table saw with scoring unit is an advanced machine, also known as a panel saw with a scorer. It is the ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and design: The Cormak MJ45-KB4 is a robust woodworking machine with a durable steel frame ensuring stability during operation. The large worktable, guided on hardened steel rods with a carriage length of 3200 mm and cutting units mounted on it, guarantees high efficiency and precision. Main cutting unit: Scoring unit: A key feature of this saw is the scoring unit, designed to eliminate internal stresses in wood by pre-scoring the underside of the workpiece. This feature makes the wood less prone to cracking and deformation after cutting. The 0.75 kW scoring unit motor ensures reliable trimming. Fedjtz Smispfx Abvjfw Saw blade: The Cormak MJ45-KB4 sliding table saw is equipped with a circular saw blade as its main cutting tool. The electric motor drives the saw blade, enabling precise material cutting. With a 350 mm diameter blade, the maximum cutting height is up to 105 mm. Manual scorer adjustment: Simple and efficient manual adjustment of the scoring unit allows for quick and precise calibration. Stops facilitate restoring previous settings, while intuitive positioning near the operator’s workstation enables adjustments without interrupting workflow. Features and functions of the sliding table saw: - Large work surface: The saw features a spacious tabletop, simplifying the handling of larger sheets of material. - Smooth feed: The feed system utilizes precision-hardened steel guides with steel ball bearings, enabling longitudinal trimming even of long sheets or plywood. - Angle and cutting depth adjustment: Adjustable cutting angles and depths allow the tool to be tailored to specific project needs. - Safety systems: The saw is equipped with safety features such as guards and emergency stop systems to ensure operator safety. Applications of sliding table saws with scoring unit: Sliding table saws with scoring units are mainly used in woodworking and window manufacturing industries for cutting wood and wood-based materials. They are perfect for cutting boards, chipboards, MDF panels, and other similar materials. The Cormak MJ45-KB4 is a highly precise, advanced tool. Technical specifications: Table dimensions: 990 x 575 mm Format table length: 3200 mm Rip capacity at the rip fence: 1250 mm Cross-cut capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade height: 0–105 mm Saw blade height at 45°: 0–73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring blade speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Extraction port diameter under the table: 100 mm Extraction port diameter on blade guard: 80 mm Machine weight: 680 kg Saw supplied without cutting blades The price does not apply to machines sold in Poland.

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW Fedpfxjwka S Ie Abvjfw - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, številka stroja/vozila: KK052469, Funkcionalnost: popolnoma funkcionalen, Connected load 380V 4kW Table size 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Right-/left-hand rotation Motor brake Socket for feed unit Fedpfx Absiinm Hovjfw Safety guards for hand routers Spindle diameter 30 mm Aigner fence Extraction connection 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Fedpfxjfxpbms Abvjfw

Stanje: rabljeno, Leto izdelave: 2000, with electric height and tilt adjustment used, top condition, low hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-tested Motor: 4 kW Steel guides Fjdsvxlq Hspfx Abvofw Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm tiltable up to 45° Scorer unit preparation Parallelogram guard Table extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - cutting angle - speed Extraction connection diameter: 120/80 mm Space requirement: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tested, functional equipment, used BIESSE Polymac edge bander, model LATO 38 - Glue pot - Guillotine - Front/rear trimming unit Ffjdpfx Aouhm Adobvsw - 1 top/bottom tilting flush cutter - 2 top/bottom tilting flush cutters - Outfeed brushes Possibility to test the machine at our premises Machine available for viewing in our Cosne workshop Price includes loading onto truck

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Fjdpsg A D Anefx Abvofw Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm