Konzolni regal, dvostranski, višina 3,50 m

Bruckamp 1,20m Arme, 500kg pro Arm

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Itedpfx Alevnh T No Nef Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Stanje: novo, Leto izdelave: 2025, Genie GS2632 NEXT GENERATION E-Drive scissor lift, new, used, and demo units available Ijdpfx Asrhkqxsl Netf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, nice veneer saw with planing unit Itsdpfx Asq Rb Irol Nof cutting length 3100 mm with rear stop

Stanje: rabljeno, prevoženi kilometri: 840.000 km, moč: 375 kW (509,86 KM), prva registracija: 10/2013, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 6.400 mm, Leto izdelave: 2013, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, žerjav, Special equipment: Front axle load 8.0 t, Trailer coupling: Central axle trailer G 250, Audio system: CD radio comfort (Bluetooth), 220 Ah battery, CB radio, Comfort cockpit, Air horn, Cab: Movable cab entry, Cab: with low roof – 1560 mm, Rear axle H 7, 13 t, Crown wheel 300, Reinforced clutch, Pull-out cool box, Air intake for refrigeration units, Air filter: Construction vehicle filter, Programmable special module, Voith retarder, Protective plate under radiator/engine, Cabin seats: Driver’s seat with comfort suspension and horizontal suspension, Sun visor, Rear axle stabilizer, Stone guard grille, Gearbox oil cooler Itsdpfx Aoyhtkdsl Njf Additional equipment: Emission standard EURO 5, Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Exterior mirror wide-angle and heated, left, Outside temperature display, Rear axle differential lock, Cab: L (long), Suspension: leaf/leaf, Electric window opener, 80 A alternator, Body/superstructure: chassis, Fuel tank: 300 ltr., Model revision from 06/2008, Engine 16.0 ltr. – 375 kW V8 diesel (OM 502 LA), Engine brake with constant throttle, Wheelbase 4500 mm, Disc brakes, Steel rims 9.00x22.5, Telligent transmission, Telligent braking system with ABS+ASR, Front underrun protection, CB radio preparation, Telephone/fax preparation, Immobilizer, Heat-insulating glazing (windscreen with band filter), Central locking incl. key, Permissible total weight 26.0 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Itjdpfoh Ek Daox Al Nsf Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Itsdpfx Aef Tv T Nol Nsf Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: novo, Leto izdelave: 2025, Genie Z-45FE hybrid articulated telescopic boom lift, new, used, and demo machines available Isdpfxernqpwe Al Nstf

Stanje: rabljeno, Leto izdelave: 2013, Transporter za ostružke, proizvajalec BMF - BÜRENER, s filtrirno napravo in visokotlačno črpalko. Dimenzije transporterja za ostružke: Itjdpfjiicnksx Al Nsf Širina vratu: 600 mm, višina vratu: 200 mm, dolžina transporterja: 3000 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, laserska moč: 120.000 W, This 3-axis laser engraving machine, Trotec Speedy 360, was manufactured in 2023. It is equipped with a CO₂ laser with a power range of 30-120 W and a working area of 610 x 305 mm. It can process materials up to 10 mm thick and supports a wide variety of materials such as wood, acrylic, and glass. The device features an integrated extraction system and a color touchscreen interface. If you are looking for high-quality engraving capabilities, you should consider the Trotec Speedy 360 machine we offer for sale. Contact us for further information. • Working area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies depending on material) • Laser power: 30-120 W (depending on configuration) • Repeat accuracy: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Extraction system: integrated extraction system • Connectivity: USB, LAN Itsdox I S Nyjpfx Al Nsf • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 mm/s

Stanje: dober (rabljeno), Konzolni regal, regal za težke tovore Ijdpfx Alecn Am Ij Notf -brez vložnih posod: niso več na voljo dvostranski -sestavljen iz: -Regal: vsak s 3 stebri, višina 5,4 m -Konzolne roke dvostranske: dolžina 500 mm -Prečka nosilnost: 795 kg -Nosilnost na stran: maks. 7000 kg -vijačen -Količina: na voljo 4 regali -Cena: na kos -Lastna teža: 1250 kg/kos