Double-sided, 3.50m H, 1.20m arms, 750kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Leto izdelave: 2021, stanje: novo, Cantilever Racking, Double-Sided, 3.50m Height, 1.20m Arms, 500kg per Arm – NEW –: Price ex works including loading! 1 racking unit with 4 uprights: €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can construct longer or shorter racking units (or by using different bay distances). The example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 3.50m high, hot-dip galvanized (IPE 160/80) - Each with 2 x 3 adjustable arms, 1.20m length, 500kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 3,500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with center of gravity at 600mm: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m - From bay width 1.50m upwards, a small surcharge applies to the listed price Dwodeddmtcepfx Agged - Special dimensions (different bay distances) also available upon request, but with surcharge and longer lead time as these are custom-made If you do not specify a different bay width, the rack will be supplied with a bay width of 1.30m. In this configuration, a rack row with 4 uprights (3 bays) is approx. 4m long. Supplied with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Djdsmhhypjpfx Aggjwd Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights: €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also build longer or shorter racking units by omitting or adding uprights (or by using different bay widths), this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided upright frames approx. 5.18 m high, hot-dip galvanized - IPE 180 / 100 - Each with 2 × 3 adjustable arms, 1.20 m, load capacity 860 kg per arm - With bracing approx. 1.30 m - Double-sided uprights approx. 5180 mm high, hot-dip galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at load center 600 mm: 860 kg per arm / 2,600 kg per upright side - With longitudinal and diagonal bracing (bay width = 1.3 m, standard is 1.30 m) Dsdpeddmqyefx Aggswd - Other standard bay widths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a bay width of 1.50 m, a minor surcharge applies to the listed price! - Special dimensions (different bay spacings) available on request, subject to surcharge and longer delivery time due to custom fabrication! - If no different bay spacing is specified, we supply the rack with a bay spacing of 1.30 m. - In this case, the total length for a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex location incl. loading! 1 racking unit with 4 upright frames €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can also create longer or shorter racking units by omitting or adding frames or by choosing different pitch spacing. The example with 4 frames is simply the most common configuration! Cantilever racking system, hot-dip galvanized, comprising: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 height-adjustable cantilever arms each Load capacity with load centre at 600mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg, arms made of IPE 100 With longitudinal and diagonal bracing, e = 1,300 mm (standard 1.30m). Unless otherwise specified, the rack is supplied with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, and, for a small surcharge, 1.50m or custom sizes! Dwjdpjddmp Aofx Agged In the standard configuration, the length of a rack row with 4 uprights is approx. 4,000 mm. Shipped complete with all bolts and nuts, floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: dober (rabljeno), Leto izdelave: 1969, Wood band saw, band saw machine, band saw, vertical band saw - Manufacturer: Hema Paul & Gotthilf Heermann, vertical band saw - Model: unfortunately without model designation Dwedjh N Thwopfx Aggsd - Drive: 4 kW - Cutting width: max. 785 mm - Cutting height: max. 475 mm - Saw blade length: 5600 mm - Worktable: tiltable - Drive motor with brake - Dimensions: 1600/1020/H2430 mm - Total weight: 794 kg

Leto izdelave: 2021, stanje: novo, One racking unit with 4 uprights €2,120 (net, excl. VAT)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, excl. VAT)! Of course, by omitting or purchasing additional uprights, you can also build longer or shorter rack units (or by using different bay spacings); this example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Dwodpeddmqnjfx Aggod Single-sided uprights approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each level with 3 height-adjustable arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal bracing, bay width = 1300 mm (standard is 1.30 m). Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a small surcharge applies in addition to the stated price. Special dimensions (other bay spacings) are available upon request, but these also incur a surcharge and have a longer delivery time, since they are custom-manufactured! If you do not specify a different bay spacing, we will supply the rack with a 1.30 m bay spacing. In that case, the length of a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all screws and nuts (shipping within Germany by parcel service directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New equipment: Price ex location incl. loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport within Germany (excluding islands): €550 (net)! Djdpfx Ageddmp Uegowd You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the centre distances), this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4,160 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each level with 3 height-adjustable arms Load capacity with 600 mm load centre: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces, centre distance = 1,300 mm (standard is 1.30 m – unless specified otherwise, the rack will be supplied with 1.30 m centre distance). Other distances possible, e.g. 1.0 m, 1.25 m for a small surcharge, also 1.50 m or custom measurements! Standard delivery length for a 4-upright racking row is approx. 4,000 mm. Delivered complete with bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h Dwjdpfsfyadbsx Aggod • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 500kg per arm – New - : Price ex location incl. loading! 1 rack unit with 4 uprights €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, you can also build longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay spacing). This example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided racking upright, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Foot and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity at 600mm load center: 500 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg, arms IPE 80 With longitudinal and diagonal braces, bay spacing = 1,300 mm (standard = 1.30m). Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge applies for bay lengths from 1.50m upwards! Special sizes (other bay spacings) are also available on request, but are subject to a surcharge and have a longer delivery time as they must be custom-made! If you do not specify a different bay spacing, the rack will be delivered with 1.30m bay spacing. With 4 uprights (3 bays), the total length is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service, direct from Würth), without floor anchors. Dwodpfxeddmpve Aggsd Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms Dsdpfx Agsddmq Togewd - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 0082-8100115, Technical Description: Passively damped CNC gantry coordinate measuring machine equipped with a Renishaw PH10M articulating probe head and TP20 touch-trigger probe. Measuring Range: X-axis = 1500 mm Y-axis = 660 mm Z-axis = 660 mm Year of manufacture: 1992 Accuracy: Length measurement uncertainty according to VDI/VDE 2617: U3 = (3.5 + 4L/1000) µm Permissible temperature range for accuracy specification: 18..24°C Additional Information: Dwsdjbig N Dspfx Aggsd System number: 0082-8100115 Software: PC-DMIS Version 3.5 Accessories: Various styli and an additional TP20 probe with medium trigger force

Leto izdelave: 2021, stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! Dwsdpsddmr Nefx Aggod 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.