Težka polica

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level. Rodpfemidyfox Af Tecb

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Rcsdou Nlkxepfx Af Tsb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm Rjdpfex D D Hmsx Af Tscb • Safety: Front light curtain system

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, 5-OSNI LAKIRNI ROBOT CMA MOD. ROBY 5EX-R - RABLJEN - Št. 5 kontroliranih osi - Št. 3 nosilci - Nosilnost zapestja 3 kg - Programiranje z učenjem Rcedpfx Afot U Ngao Tob Karusel * Število rok 3 * Nosilnost posamezne roke 25 kg Obračanje kosa * Gibanje servo krmiljeno in sinhronizirano - Priložen priročnik in CE deklaracija RETROFIT 2024 (OBNOVA NA NOVO)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Rcsdpoh Ek Daefx Af Tob Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 2.444 h, nosilnost: 1.000 kg, dvižna višina: 2.700 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 1.850 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Visokodvižni viličar Težišče: 600 Tip dvigala: Duplex Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Sprednje pnevmatike tip: poliuretan Zadnje pnevmatike tip: poliuretan Baterija napetost: 24V Tip baterije: litij-ionska Letnik baterije: 2019 Opis: Redpsvtu A Uofx Af Tjcb Vgrajen polnilec, zložljiva platforma za voznika

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Redpjh H Iyxefx Af Tecb Unitex 15

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright Rcedof Tv T Nspfx Af Tob With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard Rcsdpfx Aemhhf Sef Tsb - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: rabljeno, Naprava za dovod zraka tip 3072 A 7300/3650 m³/h, največja grelna moč 83 kW, vroča voda 90/70 °C. Naprava za odvod zraka tip 72, 7000/3500 m³/h. Lokacija skladišča: Nattheim. Rcodpfxjw I A N Aj Af Tsb