Konzolni regal

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) Rjdpfx Anjmhhypopjch - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: novo, Leto izdelave: 2025, Dry rotary vane vacuum pump available in stock. Marpa Vacuum pump. Completely brand new unit. 12-month warranty Nominal flow rate: 140 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. If you have any questions, please contact us. Rjdpfjftzhnsx Anpoch

Stanje: novo, Leto izdelave: 2025, Die Metall-Lamellenzaun-Profiliermaschine MFP-1 wurde von unserem Unternehmen entwickelt, um halbrunde Metall-Lamellenzaunprofile herzustellen. Dieses Profil ist weit verbreitet und bei Unternehmen, die sich mit Herstellung, Montage und Vertrieb von Metallzäunen beschäftigen, sehr beliebt. Die Profilproduktion erfolgt schrittweise: Zunächst werden an den Kanten des Flachmetalls Bördelungen geformt, anschließend entstehen die Profilhöhe und die halbrunde Form. Im letzten Umformstadium wird eine Mittelrippe im Profil ausgearbeitet. Diese Anzahl an Umformschritten gewährleistet einen sanften Blechwechsel während des Walzens sowie eine hohe Qualität des Endprodukts. Als Ausgangsmaterial kann ein entsprechend breiter und langer Blechstreifen verwendet werden, der zuvor auf einer anderen Maschine vorgeschnitten wird – etwa auf einer Blechschlitzanlage oder einer Tafelschere. Nach dem Profilieren kann das Zaunlattenende mit einer speziell von uns gefertigten Stanzpresse optisch aufgewertet werden. Die Werkzeuge dieser Presse verfügen über eine spezielle Rundgeometrie und sind exakt auf die halbrunde Zaunlattenform abgestimmt, um einen optimalen Schnitt zu erzielen. Die Werkzeuge bestehen aus Spezial-Werkzeugstahl und werden gehärtet, um den hohen Anforderungen an die Schnittwerkzeuge gerecht zu werden. Unser Unternehmen bietet sowohl halbautomatische Profiliermaschinen zur Herstellung von Metallzaunlatten als auch manuelle Stanzpressen sowie vollautomatische Fertigungslinien an. Rjdem Twnlepfx Anpjch Eine solche automatische Metallzaun-Fertigungslinie kann mit folgenden Komponenten ausgestattet sein: Konsolen-Abwickler, Profiliermaschine mit Automatisierungssystem und Programmierung der Stückzahl und Längen, automatische elektrische Ablängschere und eine Stapelvorrichtung. Gemeinsam mit uns finden unsere Kunden die optimale Lösung für ihren Fertigungsprozess entsprechend Produktionsvolumen, Budget usw. Für weitere Informationen zur Metall-Lamellenzaun-Profiliermaschine MFP-1 wenden Sie sich bitte an unseren Vertrieb.

Stanje: rabljeno, Žaga BEHRINGER HBE 321 A Dynamic. Rodpfx Aex Tvkxenpoch

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.400 mm, skupna dolžina: 7.800 mm, skupna višina: 2.500 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separation Specifications: Maximum sheet size: 830 x 1,150 mm Minimum sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300t) Speed: 7,000 sheets/hr Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10” display at feeder Automatic non-stop delivery roll apron Stripping station Blank separation station Centerline system Automatic separator sheet inserter for stabilising blank stacks Quick-lock frames for upper stripping tool and central stripping board Rodpfx Ast H Nhhjnpech Quick-lock frames for upper and lower blanking tools Pneumatic chase clamps and die plate locking APC 1 – automatic cutting pressure control system APC 2 – platen tilting at the delivery end 1x 4 mm cutting plate incl. 10x 1 mm cutting plates 2x 5 mm cutting plates 1x quick-lock chase 2x chases without quick-lock QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 Rcjdpfxjfzzhys Anpsh - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Leto izdelave: 2021, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), skupna masa: 1.500 kg, skupna dolžina: 3.340 mm, skupna širina: 2.360 mm, skupna višina: 2.925 mm, vhodna napetost: 400 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, nujno zaustavitev, ASCO SD Compact – Drum Screen with Innovative Technology and Maximum Flexibility The ASCO SD Compact is a powerful, semi-mobile drum screen from ASCO Technology, distinguished by its modular design, high flexibility, and innovative features. With variable drum control, adjustable rotation speed, and interchangeable screening technology, this machine is ideally suited for a wide range of material processing applications. Thanks to vibration support, a cleaning brush, and a modular deflector plate system, the SD Compact delivers exceptionally efficient screening performance. The drum screen allows for the use of various perforation sizes within a drum segment, thus enabling precise separation into up to four fractions—unique in this machine class. A particular highlight is the optional bunker extension, which increases capacity by up to 50%. The machine also offers a variable support frame concept and adjustable screening angle, allowing for optimal adaptation to different operating sites. With convenient features such as travel mode, rapid bunker changeover (in only 2–3 hours), and drum expansion for increased screening area, the ASCO SD Compact drum screen is one of the most versatile solutions on the market—robust, compact, and future-oriented. Redpfx Ajw Ryl Henpech

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 3.254 h, Terex TC 16, letnik 2014, 3254 delovnih ur, priložena 2 nova gumijasta gosenica, 2 nova pogonska kolesa, 6 žlic širine 30, 40, 50, 60 ter 2x100 rovnalna žlica - fiksna in hidravlična. Rjdpezd Tp Rjfx Anpsch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, I am selling a 2-head UV drying tunnel, Superfici Essiccatoio UV. Model: Poliedra S.Cure 1650x2 + TT1 3500. Year of manufacture: 2015. Rodpfx Asffk Etsnpoch Available immediately. Requires repair: Display, power sources for both UV units.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side Rcsdpfjh Ek Daox Anpsh - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.