Kotni obdelovalni center za okna

Weinig Unicontrol 10

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Dwodpevwdmwefx Aflja

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Dwjdpjrigxyefx Aflsa Total machine length: 415 cm Machine tested, in original condition

Stanje: delavnici obnovljeno (rabljeno), Rezna vretena: 1 kos Število reznih glav: 4 kose Premer vretena: 50 mm Krmilni sistem: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – vretena so radialno in aksialno krmljena s pomočjo CNC ----- Stroj je bil leta 2024 obnovljen v podjetju Weinig. Obnovljen je bil tudi nadzorni panel, zamenjan z modelom Siemens S 7 677 C, ki ima nov dotikni panel. Opremljen s naslednjimi obdelovalnimi glavami: Obrezalna žaga ----- z laserskim vodilom, moč motorja 3 kW, premer vretena 40 mm, hitrost vretena 3.000 vrt/min Aksialna nastavitev s pomočjo NC-osi Radialna nastavitev s pomočjo pnevmatičnega sistema na 8 položajev za zaobljanje robov od zgoraj Agregat od spodaj za zaobljanje robov ----- Aksialna nastavitev z obrezalno žago Vreteno za utore in zapornice ----- Moč motorja 15 kW Premer vretena 50 mm Hitrost vretena 2.925 vrt/min Minimalni premer kroga orodja: 380 mm, maksimalni premer kroga orodja: 400 mm Dolžina pritrditve orodja: 640 mm Aksialna nastavitev s pomočjo CNC-osi Aksialni hod: 580 mm Hitrost nastavitve: 100 mm/s 1. Profilno vreteno (so- in proti-rotacija) ----- Moč motorja 11 kW Premer vretena 50 mm Hitrost vretena 6.000 vrt/min Dolžina pritrditve orodja: 400 mm s podpornim ležajem Aksialna in radialna nastavitev s pomočjo CNC-osi 2. Profilno vreteno ----- Moč motorja 11 kW Premer vretena 50 mm Hitrost vretena 6.000 vrt/min Dolžina pritrditve orodja: 400 mm s podpornim ležajem Aksialna in radialna nastavitev s pomočjo CNC-osi Horizontalna profilna rezalna glava (zgoraj) ----- Moč motorja 3 kW Premer vretena 40 mm Hitrost vretena 9.000 vrt/min Pnevmatična nastavitev na 8 položajev aksialno in radialno Vertikalna profilna rezalna glava (desno na koncu stroja) ----- Moč motorja 3 kW Premer vretena 40 mm Dwsdpfx Asxpi Duefloa Hitrost vretena 5.850 vrt/min Pnevmatična nastavitev na 8 položajev aksialno in radialno Dodatna oprema ----- CNC-krmiljena dolžinska opora, nameščena na reznem stolu za dolžine do 3500 mm, vključno s pozicionirano obrezalno žago, integrirano v krmilni sistem. Oprema za nastavitev oken, dvostransko nastavljiva za 60 ° Komplet za dvojne dele z avtomatskim ločevanjem in prenosom Naprava za so-rotacijo z avtomatiko za obračanje Naprava za obračanje za obračanje manjših širin kril Klimatska naprava v električnem omarici PC-krmilni sistem NEXUS Avtomatski sistem za obračanje Transportni valj, vključno s transportnim trakom za povratni transport obdelovancev operaterju (tehnični podatki po navedbah proizvajalca – brez jamstva).

Stanje: rabljeno, Slotted spindle, 2 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus Weinig Unicontrol 10 NC window production line, optionally with extensive tooling ----- Optionally available (with additional surcharge): IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors Technical manufacturer's description: ----- Pos. 1: Weinig Unicontrol 10 NC window production line ----- Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake, 3,000–6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically to 8 positions for edge rounding from above Horizontal rounding unit, bottom ----- Axial adjustment mechanically coupled to cross-cut saw 1st tenon and slot spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial adjustment via NC axis Home position below table: 5–10 mm Radial adjustment: fixed 2nd tenon and slot spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial adjustment via NC axis Radial adjustment via NC axis Home position below table: 5–10 mm 1st profile spindle (climb and counter climb) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Horizontal top profile milling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 130 mm Adjustment pneumatically to 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool orbit: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm NC axis Radial adjustment: NC axis Home position below table: 5–10 mm Vertical profile milling unit right, machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Adjustment pneumatically to 8 axial and radial positions Djdpfozawizsx Aflowa Further accessories -----...

Stanje: zelo dobro (rabljeno), HSS saw blade grinding machine VOLLMER model CMS 10M Dodji Hchdepfx Afljwa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine Dwsdpfsxmr N Ijx Afloa 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 100 mm, pomik po osi Z: 142 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: WS 400-20, CNC machining centre from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It is equipped with a powerful crosscut saw with spindle speeds of up to 3,000 rpm and a tenoning spindle motor output of 15 kW. If you are looking for high-quality CNC machining capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Crosscut saw motor power: 3.7 kW • Crosscut saw spindle speed: 2,800–3,000 rpm • Max. tool diameter for crosscut saw: 400 mm • Crosscut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 pcs • Tenoning spindle diameter: 50 mm • Tenoning spindle clamping length: 400–640 mm • Max. tool diameter for tenoning spindle: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 pcs • Profiling spindle diameter: 50 mm • Profiling spindle clamping length: 320–400 mm • Profiling spindle max. tool diameter (cutting circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm Dedjy Ixpaspfx Aflswa • Motor power of top horizontal profiling unit: 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Max. tool diameter for horizontal profiling unit: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, SCHORR Wood Splitter HS-22PE PRO – 22 Ton Splitting Force -- 22 t splitting force – effortless splitting of hardwood and thick logs -- Heavy-duty construction (340 kg) – robust hydraulics and sturdy steel frame -- Combined drive: PTO shaft and 400V electric motor – flexible use in the forest or on the yard -- Splitting length up to 110 cm – ideal for long log sections -- Practical log lifter – lifts heavy logs and acts as a safety guard -- Lowerable cylinder (1.99 m) – easy to transport and space-saving storage -- 3-point hitch (Cat. I & II) – transport directly with a tractor -- Two-hand operation and safety features – maximum operational safety -- Mobile with wheels and transport wheel Dodpfow Smphsx Afljwa Performance and Flexibility The HS-22PE impresses with powerful hydraulics and reliable continuous operation. Thanks to the PTO shaft and 400V electric motor, you have the choice: use it mobile with a tractor or quietly and emission-free at the yard. Comfort and Efficiency -- Log lifter for heavy wood – eliminates strenuous manual work -- Automatic or manual return for fast or precise operation -- Two speeds – rapid approach, high splitting power Robust Construction With high-strength steel, durable hydraulic components, and a stable base, the HS-30PE is built for tough jobs. The large transport wheels make moving it easy, even on uneven ground. Technical Data Manufacturer (abbreviation): SCHORR -- Manufacturer’s model: HS-22PE -- Splitting force: 22 tonnes -- Net weight: 340 kg -- Drive: Electric (400V 5.5 kW, 16A) or PTO (540 rpm) Basic Dimensions -- Overall length: 1300 mm -- Overall width: 1450 mm -- Overall height: 2470 mm -- Hydraulic cylinder diameter: 11.5 cm -- Piston rod diameter: 6 cm -- Splitter wedge length: 22 cm -- Max. / Min. split diameter: 40 cm / 8 cm -- Distance between wedge & ground: 16 cm Speed -- Cylinder speed PTO: advance 5.5 s / return 9.5 s -- Cylinder speed electric motor: advance 7.5 s / return 14.5 s Service and Delivery -- Spare parts always in stock -- Delivery or collection available in 48465 Schüttorf (by appointment only) -- Financing and leasing available on request We are happy to provide personal consultation on the SCHORR HS-22PE PRO.

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 83406, Obdelovalni center za okna Weinig Unicontrol 10, letnik izdelave 1998 Dwjdpfoy Sxlpjx Aflsa

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), moč vretenovega motorja: 11.000 W, največja hitrost vretena: 6.000 obr/min, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust, used window production machine with a working width of 40–220 mm and a motor power of up to 15 kW for various machining units. The machine features advanced options such as a synchronization device, electronic height adjustment, and an automatic turning system to enable efficient single-operator workflow. If you’re looking for a high-quality milling machine, we recommend considering the Weinig Unicontrol 10-5, which we have available for sale. Please contact us for further information. • Capacity • Working width: 40–220 mm • Working height (longitudinal processing): 40–100 mm • Working height (cross processing): 40–100 mm (grain height 80 mm) Dedpfx Aox S Sk Eoflswa • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length at 320 mm tool diameter • Feed unit (cross processing) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 hold-down clamps • Length stop: with scale and magnifier for measurement of sash or frame external dimensions • Counter: pneumatically indexed, 4 positions (not suitable for Studio windows), up to a maximum timber height of 80 mm • Double workpiece package: single or double part feed system, with cross separation and retention system • 1st workpiece (lying against stop) wood width: 55–90 mm • 2nd workpiece wood width: 130 mm • Feed unit (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (continuously adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic against four-position turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool reference circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/cutting units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg Dwedpfx Aoh Nvyzsflja

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Dwjdpfx Aetq U A Isflea