Avtomatski stroji za prepogibanje robov nakup rabljenega (10)

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 Bdodpfxsfzzhyo Afqsk - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: rabljeno, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle length: 120, 320, 125 mm Weight: 2500 kg Loading dimensions (L x W x H): 3800 x 1400 x 2000 mm Table length: 3470 mm Weinig Univar 6 P For sale on behalf of client ----- Operating voltage: 380 volts, 50 Hz. For re-milling windows, doors, and similar items with asymmetrical continuous profiles. Aggregate arrangement: 1. Climb-cut spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle The profiling spindle is suitable for holding several tools stacked above each other. Spindle movement is pneumatic. To achieve tear-free re-milling, spindle 1 works in climb-cut mode. For the last 100 mm of each frame end, this spindle plunges with the corresponding tool into the wood to avoid tear-out at the frame corners. Machine body, tables, fences: The machine body is made of heavy, torsion-free, and vibration-damping elements. Fences on the right in the profiling area are made of Pertinax. In front of the profiling spindle there is a split fence with sliding rail for short parts. Additional stop rail for large-format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blowing system for cleaning feed rollers and table. Spindles, hood: Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip flow. Easiest tool changes thanks to quickly opened hood covers. Machine operation, adjustment aids: Operation from the front side. Adjustment of the fences to the tool diameter via mechanical digital display. Electrical system, motors, control: Electrical equipment according to DIN VDE 0113 - Electrical equipment of industrial machines EN 60204 IEC 204-1. Other electrical regulations are not considered. Motors dynamically balanced. Control of tool positions via selector switch from the control panel. Tools: Machine equipped with set-up tools, but without processing tools. SPINDLE 1 Climb-cut spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10 mm Motor power: 4 kW (5.5 kW) SPINDLE 2 Bedpfx Afoxpi Eljqjdk Number of tools: 4 Spindle travel vertical: 3 x 80 mm = 4 tools Optionally switchable to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50 mm/35 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Max. tool diameter With zero diameter 112 mm: 210 mm With zero diameter 140 mm: 232 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10/5 mm Motor power: Spindle: 11 kW, Feed: 1.1 kW Feed profiling unit: stepless 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Special equipment: 3 mechanical spindle br...

Stanje: dober (rabljeno), Leto izdelave: 1995, Angle system for window production, consisting of: slotting unit for 8 tools with hydraulic stroke 75 mm (clamping height 600 mm), milling unit for 4 tools with hydraulic stroke 80 mm (clamping height 320 mm), with return function, equipped with IV 68 tooling. Bedpstqft Isfx Afqjdk

Stanje: rabljeno, For profiling and rebating windows, doors, individual components, and similar workpieces with continuous profiles. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, feed synchronization unit 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW Bjdpfxjvnab So Afqjdk 4. Profile milling unit, horizontal bottom, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW Rebating carriage for narrow and short sashes, PC control system Nexus.

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the Weinig Univar 10 window profile doubling center. Year of manufacture: 1998. Milling heads: OERTLI. Bjdpefzzhrjfx Afqjdk Available immediately. Unit price: 8,500 euros. 4 units available. Condition: very good!

Stanje: rabljeno, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Profile Reworking Machine ----- For re-profiling of windows, doors, and similar items featuring asymmetrical perimeter profiles. Suitable for timber thicknesses from 68 to 92 mm. Processing time per frame re-profiling for a medium size (1.20 x 1.20 m) – approx. 2 min. Available tool positions can be selected via the operator control panel. The machine is equipped with three hydraulically controlled right-side precision lifting spindles, designed to accommodate three tool sets, each spindle providing 2 x 95 mm vertical spindle stroke. The spindle stroke is performed in a U-motion, enabling minimal opening in the milling fence when processing short parts. Spindle stroke can be finely adjusted horizontally for both tool positions from the operator side. Centralized lubrication for spindle units. For tear-free re-profiling of window sashes or frames and doors, the first spindle can be selected for clockwise or counterclockwise rotation. At each of the last 100 mm at the end of a frame, this spindle with the corresponding climb-cutting tool plunges into the passing timber. This prevents tear-out caused by the following counter-rotating milling spindle. The first seven transport rollers can be lifted via foot pedal, shortening the throughput time. An additional support rail permits re-profiling of large-format frames as well. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height is electronically measured and displayed. Electrical design according to VDE standards. Machine is supplied with operation tools, but without machining tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1st Profile Spindle (climb and counter-rotation) Bdedpovnv Uuofx Afqok ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm With automatic climb-cutting plunge mechanism 2nd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 3rd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 4th Profile Spindle – Fitting (hardware) unit, right ----- For machining the hardware groove during the re-profiling pass or for grooving along the longitudinal profile. Pneumatic horizontal movement with selector switch at the operator control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm (for 2 tools) Tool cutting circle min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Stanje: rabljeno, WEINIG UNIVAR 10 frame turning device, offered as a source of spare parts from a UC-Matic window production line. - Year of manufacture: 1997 - Sütron BT20 control system - Machine incomplete - Further details available on request - Image for illustration purposes only. Bedpolf H Sqefx Afqsdk

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), I am selling the complete window manufacturing profiling line: Bdodpfxsfzzido Afqjk 1 pc. 5-spindle four-sided planer with saw, Weinig Unimat 23EL - without HESS sanding machine – alternative replacement machine negotiable 2 pcs. tenoning and slotting machines, Weinig Unitec 10 2 pcs. profiling and rebate automation centers, Weinig Univar 10 1 pc. CNC dowel drilling machine, KOCH WinDoor - Set of complete Weinig automation infeed and conveyors Year of manufacture: 1997. Milling heads: OERTLI. Available immediately. Already dismantled and placed on original pallets. Condition: very good!

Stanje: rabljeno, for profiling and rebating windows, doors, individual parts, and similar components with circumferential profiles, including return conveyor Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, Bdjdpfx Aslf H Suofqok 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Stanje: rabljeno, For profiling and trimming windows, doors, individual components, and similar items with continuous profiles, including mechanization for single-person operation. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, co-direction drive system. 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic. 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW. Bdjdpfxslf H S Ao Afqek 4. Profile milling unit, horizontal below, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW. Trimming carriage for narrow and short sashes, PC control Nexus.