Tornos Multideco nakup rabljenega (129)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 35.324 h, moč vretenovega motorja: 11.000 W, največja hitrost vretena: 8.000 obr/min, proizvajalec krmilnikov: FANUC, število osi: 10, Cette Tornos-Bechler MultiDeco 20-6 à 10 axes a été fabriquée en 2001. Elle dispose d’un diamètre de barre maximal de 20 mm, de vitesses de broche allant jusqu’à 8 000 tr/min et d’une puissance moteur de broche principale d’environ 11 à 15 kW. Elle est équipée de plusieurs stations d’outils avant et arrière ainsi que d’un convoyeur de copeaux en option. Si vous recherchez un tour de haute qualité, nous vous recommandons la Tornos-Bechler MultiDeco 26-6 que nous proposons à la vente. Contactez-nous pour plus d’informations sur cette machine. Équipement supplémentaire Blsdpfx Ajyairnsbhsc • Système de refroidissement : huile ou émulsion • Convoyeur de copeaux : en option Avantages de la machine Avantages techniques de la machine • Stations d’outils : plusieurs stations d’outils avant et arrière (modulaires) Informations complémentaires Diamètre max. de barre : 20 mm Longueur max. de pièce : env. 100-120 mm (par serrage) Unité d’usinage arrière : Oui (configuration 3 axes)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 64.409 h, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 8.000 obr/min, proizvajalec krmilnikov: FANUC, število osi: 10, Ta 10-osna Tornos-Bechler MultiDeco 26-6 je bila izdelana leta 2000 in omogoča maksimalni premer palice 26 mm ter dolžino obdelovanca do 120 mm na eno vpenjanje. Obratuje z vrtljaji vretena do 8.000 min⁻¹ in glavno pogonsko močjo 18 kW. Izkoristite priložnost za nakup tega švicarskega stružnega stroja Tornos-Bechler MultiDeco 26-6. Za dodatne informacije o stroju nas kontaktirajte. Dodatna oprema • Možnost zadnjega obdelovanja: Da Prednosti stroja Tehnične prednosti stroja • Največji premer palice: 26 mm • Največja dolžina kosa: pribl. 120 mm (na eno vpenjanje) Bodpfjyairhjx Abhjlc Dodatne informacije Stroj je še vedno pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 54.044 h, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 3.500 obr/min, proizvajalec krmilnikov: FANUC, Ta TORNOS MultiDeco 20-8b je bila izdelana leta 1997. Opremljena je z 8 glavnih vreteni in kontra vretenom, ki omogočajo maksimalni premer palice 20 mm. Hitrost glavnega vretena dosega do 3.500 vrt/min, moč vretena znaša od 15 do 18,5 kW. Če iščete kakovosten stružni stroj, priporočamo, da razmislite o TORNOS MultiDeco 20-8b, ki jo ponujamo v prodajo. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Maksimalni premer palice: 20 mm Bodpfxeyairbo Abhslc Dodatne informacije Stroj je še vedno pod napetostjo.

Stanje: dober (rabljeno), Leto izdelave: 1999, Multi-spindle automatic lathe TORNOS MultiDeco 26/6, No. T-61796, year of manufacture 1999, FANUC control system, chip conveyor, bar feeder IEMCA Sir 32F, No. 98072003, year of manufacture 1998 Bsdounvwlepfx Abhelc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 54.374 h, Steuerungseinheit Marke: FANUC Bedpfxex D N Snj Abholc Hauptantrieb Anzahl der Spindeln: 6 Spindeldrehzahlbereich: 400–5.000 min⁻¹ Anzahl der Achsen: 18 Revolver Anzahl der Revolver: 1 Diese TORNOS MultiDeco 32-6i wurde 2003 hergestellt. Sie verfügt über einen maximalen Stangendurchmesser von 32 mm, eine maximale Sechskantstangenkapazität von 28 mm sowie eine Hauptspindeldrehzahl von 400 bis 5.000 U/min. Mit 6 Spindeln für die Simultanbearbeitung und 5 Querschlitten bietet sich Ihnen die Möglichkeit, diese TORNOS MultiDeco 32-6i Kurzdrehmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Drehen

Stanje: rabljeno, TECHNICAL DATA - Bar diameter: 5-20 [mm] - Max part length (without sub-spindle operation): 100 [mm] - Max part length (with sub-spindle operation): 80 [mm] - Spindle rotation speed: 5000 [rpm] - Max spindle power: 15 [kW] - Max drilling/internal thread cutting power: 3.7 [kW] - Number of CNC axes: 23 - Number of cross slides: 8 - Sub-operation slide: 1 - Longitudinal slides: 7 - Number of sub-spindles: 1 Bodpeuhaq Ujfx Abholc - Sub-spindle motor power: 1.1 [kW] - Dimensions: 5880 x 1400 x 1950 [mm] - Weight: 7200 [kg] ACCESSORIES - TORNOS PNC DECO control system - HIRTH toothing drum locking device - High-pressure pump - Chip conveyor - Turning tool holder - IEMCA PRA 40/33F bar feeder magazine - Operating hours: 31600

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 17 - Max. bar diameter: 25.4 mm - Spindle speed: 5,000 rpm Blsdpfxowuu Rgs Abhjc - Spindle drive power: 18 kW WEIGHT AND DIMENSIONS - Footprint: 3,500 x 1,600 mm - Machine height: 1,950 mm - Machine weight: 8,500 kg MACHINE HOURS - Power-on hours: 33,026 h EQUIPMENT - Control system: TORNOS TB DECO - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Coolant reservoir - Bar feeder: TORNOS Robobar MSF 522

Stanje: rabljeno, CNC multi-spindle automatic lathe TORNOS MULTIDECO 26/6 Bjdsuhaqhepfx Abhjlc

Stanje: rabljeno, TECHNICAL DATA - Minimum/maximum bar diameter: 8–25.4 mm - Maximum workpiece length: 120 mm - Spindle speed: 5,000 rpm Bsdpfxouharfj Abhelc - Spindle power: 18 kW - Number of CNC axes: 17 - Cylinder lock with Hirth coupling - Dimensions: 3500 x 1600 x 1950 mm - Weight: 8,500 kg MACHINE HOURS - Operating hours: 63,341 h EQUIPMENT - TORNOS TB DECO control system - Spindle stop - Sub-spindle with counter rotation device - Single-shaft milling unit - Polygon milling unit - Center block drilling unit - Pick-up unit - Turning tool holder - Bar feeder: IEMCA SIR 25 P - KNOLL lubricant tank - Chip conveyor - Cutting oil cooling system

Stanje: rabljeno, TECHNICAL DATA - Min/Max bar diameter: 8-25.4 [mm] - Max. part length: 120 [mm] - Spindle rotational speed: 5000 [rpm] - Spindle power: 18 [kW] - Number of controlled axes: 17 - Drum lock via Hirth coupling - Dimensions: 3500 x 1600 x 1950 [mm] - Weight: 8500 [kg] Bodpfxeuharxo Abhelc - Operating hours: 66,850 [h] EQUIPMENT - CNC: TORNOS FANUC PNC DECO - Lubricant tank: KNOLL * with high-pressure pump - Bar loader: TORNOS ROBOBAR MSF-522 - Chip conveyor - Chiller unit: HYFRA

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 23 - Max. bar diameter: 20 [mm] - Spindle speed: 3500 [rpm] - Spindle drive power: 15 / 18.5 [kW] Bsdpfx Abswuu R Hohslc SUB SPINDLE - Sub spindle position: 8 - Max. bar diameter: 20 [mm] - Travel distance: 160 [mm] - Max. part length: 75 [mm] SLIDES - Number of cross slides: 3 * Positions: 1 / 8 / 9 * Stroke X, position 1: 50 [mm] * Stroke X, positions 8/9: 65 [mm] - Number of compound slides: 6 * Positions: 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1: 50 x 80 [mm] - Number of longitudinal slides: 1 * Position: 8 * Stroke Z2: 160 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power requirement: 80 [kVA] WEIGHT AND DIMENSIONS - Required space: 9600 x 2500 [mm] - Machine height: 2200 [mm] EQUIPMENT - CNC control: FANUC PNC DECO - Sub spindle with brake - Retractable stop - Spindle stop - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Coolant reservoir - Bar feeder: IEMCA PRA 52F / 33

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 17 - Max. bar diameter: 25.4 [mm] Bodswuu N Nepfx Abhslc - Spindle speed: 5,000 [rpm] - Spindle drive power: 18 [kW] WEIGHT AND DIMENSIONS - Required floor space: 3,500 x 1,600 [mm] - Machine height: 1,950 [mm] - Machine weight: 8,500 [kg] OPERATING HOURS - Hours powered on: 62,132 [h] EQUIPMENT - Control system: TORNOS TB DECO - Chip conveyor: MAYFRAN P51-02 M313001 - Coolant tank * with high-pressure pump: MAYFRAN 80 [bar] - Coolant container - Bar feeder: TORNOS Robobar MSF 522 - Oil mist extraction: ELBARON - Fire extinguishing system *: BAUER KRAFT

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 18 - Number of spindles: 6 - Max. bar diameter: 32 mm - Spindle speed: 400-5000 rpm SUB-SPINDLE Bedpfowuu Rmsx Abhjlc WEIGHT AND DIMENSIONS - Footprint: 8300 x 2300 mm - Machine height: 2240 mm - Machine weight: 11,500 kg EQUIPMENT - Control system: Fanuc PNC Deco - Chip conveyor: Mayfran - Coolant tank * with high-pressure pump - Bar feeder: TORNOS MSF 832/6

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 23 - Max. bar diameter: 20 mm - Spindle speed: 3500 rpm - Spindle drive power: 15 / 18.5 kW SUB SPINDLE - Sub spindle position: 8 - Max. bar diameter: 20 mm - Travel: 160 mm - Max. part length: 75 mm SLIDES - Number of cross slides: 3 * Stations: 1 / 8 / 9 * Stroke X, position 1: 50 mm * Stroke X, positions 8/9: 65 mm Blsdpfowuu Ryex Abhsc - Number of compound slides: 6 * Stations: 2 / 3 / 4 / 5 / 6 / 7 * Stroke X x Z1: 50 x 80 mm - Number of longitudinal slides: 1 * Station: 8 * Stroke Z2: 160 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 80 kVA WEIGHT AND DIMENSIONS - Required space: 9600 x 2500 mm - Machine height: 2200 mm ACCESSORIES - Control: FANUC PNC DECO - Sub spindle with brake - Retractable stop - Spindle stop - Chip conveyor - Coolant tank: * with high-pressure pump * with paper filter - Bar feeder: IEMCA PRA 52F / 33

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 18 - Number of spindles: 6 - Max diameter for round bars: 32 mm - Max pass-through for hexagonal bars: 28 mm - Spindle speed: 400 – 5,000 rpm - Counter-spindle capacity: 32 mm - Number of cross slides: 5 - Stroke of cross slide at positions 2 and 3, X x Z: 60 x 80 mm - Stroke of cross slide at positions 1, 4, and 5, X x Z: 60 x 100 mm - Dimensions: 8,300 x 2,300 x 2,240 mm - Weight: 11,500 kg - Operating hours: 52,066 h ACCESSORIES - Numerical control TORNOS PNC DECO - Spindle head locking device at position 4 - Numerical counter-spindle with counter-operation device - Workpiece catcher with conveyor belt - 5 GOLTENBODT turning tool holders with collar - 1 GOLTENBODT cut-off tool holder - 4 fixed drills Blsdpfx Aouhaquobhec - 1 driven drill - 1 chip conveyor - High-pressure pump - Integrated TORNOS MSF 832/6 bar loader - Lamp

Stanje: rabljeno, Avtomatski podajalnik palic Bledex Trztjpfx Abhsc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-style bar feeder, an integrated hydraulic unit, and supports both front and rear operations with a center height of 1100 mm. The machine features a movable headstock, a direction-dependent spindle stop, and a cross slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Contact us for further information about this machine. Additional information: • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 featuring vertical and horizontal movement Bsdpfx Asx D D Ikebhelc • Absolute measuring system • 9 axes, including C1 and C4 • Drum-type bar feeder "HYBRIDE 10+5" • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars (without bar preparation, up to 8 mm) • Tryton collet chuck • 2 different hybrid drum magazines • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar feeder

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, največja hitrost vretena: 12.000 obr/min, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, directional-dependent spindle stop, and cross slides with tool holders. The machine offers an independent sub-spindle, lubrication unit, and magazine loader with drum. Equipped with a 'HYBRIDE 10+5' drum for bars up to 10 mm, and an integrated hydraulic unit. Contact us for more information about this machine. Bjdpfx Ajx D Dmyebhelc Additional information: • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the sub-spindle • Direction-dependent spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, suitable for unprepared bar stock up to 8 mm • Independent sub-spindle • Thread cutting device for ESX 12 collet • Lubrication device for guide bushing with filter • Magazine loader with drum • Integrated 25-liter hydraulic power unit with filter • Front and rear support foot, center height 1100 mm Optional: comprehensive package of measuring instruments

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It is equipped with an integrated bar feeder handling bars up to 3.2 m in length and diameters ranging from 2 to 10 mm. The machine features a Robobar SSF 3m loading magazine and FANUC 16i-TB CNC control, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for further information regarding this machine. Additional information: • Maximum bar length: 3200 mm • Bar capacity: minimum 2 mm, maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB CNC control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Centre height: 1100 mm • Automatic, integrated bar feeder with oil bath • Robobar SSF 3m magazine Bedpfx Asx D Dliobhjlc • Front and rear support feet • "HYBRIDE 10+5" drum with 14 guide holes for 1–4 mm and 14 guide holes for 4.1–10 mm bars (up to 8 mm without pre-turned bars) • Electrical control cabinet • Integrated 25-litre hydraulic unit with filter • Movable headstock • Programmable spindle stop Optional: Comprehensive package of measuring instruments

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 37.578 h, Ta stroj Tornos Deco 10 je bil izdelan leta 2005. Gre za švicarski stružni stroj z bobnom s podajalnikom, filtrom s kapaciteto 25 litrov in integrirano hidravlično enoto. Podpira različne premere palic do 8 mm, kar omogoča vsestransko uporabo pri preciznih opravilih. Razmislite o nakupu tega švicarskega stružnega stroja Tornos Deco 10. Za več informacij nas kontaktirajte. • Boben s podajalnikom Blsdpfx Aex D Dm Tjbhoc • 10+5" hibridni boben • Integrirana hidravlična enota • Oporna noga spredaj/zadaj • Višina konic 1100 mm • Filter s prostornino 25 litrov • Elektrika: 380 V, 3 faze, 50/60 Hz napetost motorja • Krmilna napetost: 24 V DC • Združljivost palic (za 14 vodilnih cevi): • Palice s premerom 1-4 mm • Palice s premerom 4 mm • Palice s premerom 8 mm Dodatna oprema • 1 kos posode za olje • 1 posoda za zbiranje ostružkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe with a movable headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. Includes an independent sub-spindle, lubrication unit, and a drum-type bar feeder. Ideal for precision turning operations with a bar capacity of 10 mm. Consider the opportunity to purchase this Swiss lathe TORNOS DECO 10e. Contact us for further information. Additional Information • Movable headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 for vertical and horizontal movement • Independent sub-spindle • Swiveling workpiece holder at the sub-spindle • Lubrication unit for the guide bushing with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting device for collet ESX 12 • 4 fixed tool holders • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front and rear support feet, center height 1100 mm • “HYBRIDE 10+5” drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V Bedpfx Aex D Dmmjbhjlc • Control voltage 24 V • Turning diameter 10 mm Optional: Comprehensive set of measuring instruments

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a movable spindle, direction-dependent spindle stop, and an independent sub-spindle. The machine is equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. It is ideal for precise small-batch turning and supports bar diameters from 1 to 10 mm, with up to 8 mm possible without special preparation. Contact us for more information regarding this machine. Additional Information • Electrical control cabinet • Cross slide with 4 tool holders T11-T24, supporting vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Thread-cutting attachment for ESX 12 collet chuck • Movable headstock • Independent sub-spindle • Swiveling workpiece holder at the sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter Blsdpex D Dndefx Abhsc • Front and rear support feet, center height 1100 mm • “HYBRID 10+5” drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, processing bars up to 8 mm without special preparation • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Optional: Comprehensive package of measuring devices

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent sub-spindle, a swiveling workpiece holder, and a lubrication device. Additionally, it includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, you should consider the TORNOS DECO 10a we have for sale. Please contact us for further information. Additional Information • Cross slide with 4 tool holders T11-T24, with vertical and horizontal movement • 3 pre-set turning tool holders • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • Thread cutting device for ESX 12 collet chuck • Drum-type bar feeder Bsdpfx Asx D Dmtebhjlc • Integrated 25-liter hydraulic power unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Krmilna enota Znamka: FANUC Model: Series Oi-TD Glavni pogon Število osi: 5 Hitrost vretena: 10.000 min⁻¹ Moč motorja vretena: 3,7 kW Ta 5-osni TORNOS Delta 20/5 je bil izdelan leta 2008. Opremljen je z dvojnima vretenoma, ki lahko obdelujeta palice premera do 20 mm in dolžine do 170 mm, z največjo hitrostjo 10.000 min⁻¹. Krmiljen je s CNC Fanuc serije Oi-TD in ima zalogovnik za podajanje palic Robobar. Ta švicarski tip stružnice je odličen za precizno obdelavo. Za več informacij o stroju nas kontaktirajte. Bljdsx Sz A Dspfx Abhec Vrste uporabe Struženje

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, For sale: CNC Swiss-type automatic lathe TORNOS GT 26/6 II, including bar feeder Manufacturer: TORNOS Model: GT 26/6 II Year of manufacture: 2017 Maximum bar capacity: 26 mm CNC control: FANUC High-dynamic turning and milling operations Suitable for complex series production parts Axis / spindle concept – TORNOS GT 26/6 II Spindle concept: - 1 main spindle - 1 sub spindle - Synchronized machining for highly productive series manufacturing Axis concept: Linear axes: - X1 / Z1 – Main spindle - X2 / Z2 – Sub spindle - X3 – Cross machining / auxiliary tools C-axes: - C1 – Main spindle - C2 – Sub spindle Number of CNC axes: 6 CNC axes Machining capabilities: - Simultaneous main and sub spindle operation - Milling and cross machining with C-axes - High process integration and short cycle times Machine weight: approx. 3,200 kg Transport dimensions (L × W × H): approx. 3,200 × 1,800 × 2,000 mm Blsdpfx Abjx N Dg Tehjc Bar feeder Weight: approx. 700 kg Dimensions (L × W × H): approx. 3,500 × 800 × 1,500 mm We offer commissioning as an additional service if required. The machine can be inspected near Heilbronn by prior arrangement. Loading can be provided. Technical data, accessories, and machine descriptions are non-binding.