Traub nakup rabljenega (99)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Isdpjx Hxv Dofx Ah Aoik Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Leto izdelave: 2007, obratovalne ure: 24.593 h, Stanje: rabljeno, številka stroja/vozila: 5010481, Največji premer struženja: 340 mm, največja dolžina struženja: 750 mm, največja hitrost vretena: 4.000 vrt./min., transporter za ostružke, krmilni sistem TX 8I, 12-pozicijski revolver. Iiedex Akmqopfx Ah Ajk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena! Krmilnik: TX 8 i-p GLAVNO VRETENO maks. premer palice: 32 mm maks. dolžina obdelovanca - dolgi način struženja: 245 mm - kratki način struženja: 125 mm maks. hitrost vretena: 6.400 /min C-os PROTIVRETENO maks. premer palice: 32 mm maks. dolžina vpenjanja obdelovanca: 250 mm maks. hitrost vretena: 6.000 /min C-os ZGORNJI REVOLVER ORODIJ Število postaj: 10 vse gnane maks. hitrost: 12.000 /min SPODNJI REVOLVER ORODIJ Število postaj: 9 vse gnane maks. hitrost: 12.000 /min ZADNJA ENOTA Število postaj: 8 od tega 3 gnane (T12, 13 in 14) Hitrost T12 & T14: 12.000 /min Hitrost T13: 4.000 /min Transportni trak za dele Iisdjxrf Etopfx Ah Ask Transporter za ostružke KSS črpalka 20 bar IFS filter za oljno meglo Podajalec palic FMB turbo 3-36

Stanje: dober (rabljeno), Leto izdelave: 2003, z gnanimi orodji, Y-os, C-os Krmiljenje TRAUB TX8 H Iodpsx A Evmofx Ah Aeik Premer struženja - 275 mm Dolžina struženja - 450 mm Vrtlaji vretena 5600 o/min Delitev C-osi 0,001° Revolverska glava z 12 gnanimi pozicijami Podajalnik palic Naprava za izlov kosov Razna dodatna oprema MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 12.000 obr/min, premer struženja: 32 mm, skupna masa: 7.000 kg, hitri pomik na osi Z: 20 m/min, moč: 10,7 kW (14,55 KM), Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, C-os Zgornji revolver za orodja z osmi X/Y/Z/H z 10 orodnimi mesti Spodnji revolver za orodja z osmi X/Y/Z/H z 9 orodnimi mesti Zadnja enota z 8-kratnim pogonom za 3 orodja Tečajni trakasti transporter Iiedpfx Ahjx Digle Aek Papirni trakasti filter Resy Nadzor orodij Traub Magazin za nalaganje palic FMB LSK 38

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Glavni pogon Število osi: 9 Hitrost vretena: 8000 vrt/min Ta 9-osni švicarski stružni stroj TRAUB TNL 32 je bil izdelan leta 2014. Opremljen je z upravljanjem TX8i-s s 64-bitnim RISC CNC/PLC procesorjem, barvnim TFT zaslonom in elektronskim ročnim kolesom. Glavno vreteno omogoča premer izvrtine 32 mm, stroj pa vključuje tudi podvreteno z osjo C. Ponuja dvojno gnano zgornjo orodjarno in spodnjo orodjarno z devetimi držali za orodja. Razmislite o nakupu tega švicarskega stružnega stroja TRAUB TNL 32. Za več informacij nas kontaktirajte. Vrste uporabe Ijdpsx D Drcefx Ah Asik Struženje

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Isdpfx Aex E Inmoh Asik Tool Carrier II (X/Z): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar loader, FMB Minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Mechanical interface prepared Tool holders: Various static and driven holders

Stanje: rabljeno, Leto izdelave: 1990, Tehnične podrobnosti: Obdelovalni premer: 445 mm Obdelovalna dolžina: 2000 mm Skupna potrebna moč: 34 kW Teža stroja cca: 7,5 t Dimenzije cca: 6 x 2,5 x 2,2 m Obdelovalni premer nad vozičkom: 660 mm Vrtina vretena: 65 mm Število vrtljajev vretena: 16 - 3150 min⁻¹ Hitri pomik v x-smeri: 10 mm/min Hitri pomik v Z-osi: 15 m/min Ijdpfjw I R Ndox Ah Ajik s CNC krmiljenjem TX 8 D C-os za gnana orodja Revolverska glava s 14 pozicijami Konjiček, luneta SMW SLK 520 N kot NC-os različni držala za gnana orodja različni držala za stružna orodja Transporter odrezkov in hladilna naprava

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Description: The machine is in good technical condition and can be tested by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding into the machine. As part of the delivery, we can also provide internal equipment – guide bushes and collets for the main spindle, sub-spindle, and bar feeder – suitable for material diameters ranging from 3 to 12 mm. Maximum bar capacity: 20 mm (0.8 in) Z1 stroke max.: 205 mm (8.1 in), 80 mm (3.1 in) Maximum spindle speed: 10,000 rpm (both spindles) Power at 100% / 40% duty: 2.2 / 3.7 kW (3.0 / 5.0 hp) Torque at 100% / 40% duty: 14 / 23.5 Nm (10.3 / 17.3 ft-lb) C-axis resolution: 0.001° Rapid traverse Z1: 40 m/min (1,574 in/min) Upper turret: - Number of tool stations: 8 - Number of driven tool positions: 8 - Power at 100% / 40% duty: 1 / 2 kW (1.3 / 2.7 hp) - Tool shank diameter: 45 mm (1.8 in) - Turning tool size: 16 x 16 / 12 x 12 mm (0.6 x 0.6 / 0.5 x 0.5 in) X1 travel: 120 mm (4.7 in) Rapid traverse X1: 20 m/min (787 in/min) Chip-to-chip time: Isdpfox An T Uox Ah Asik

Stanje: pripravljen za uporabo (rabljen), Traub 700 734 VEMEM/I vmesna plošča, rabljena, v dobrem stanju, 100% delujoča, dobava skladno s fotografijami. Iiedpfsx Eu Tvox Ah Aok

Stanje: zelo dobro (rabljeno), Manufacturer: GRÜN SYSTEMTECHNIK WETZLAR Including carrying case We are offering an original ATC measuring microscope that was originally removed from a TRAUB TNA turning center. The device is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable tool holder interface (size comparable to TRAUB TNA400). Key features and benefits: • Universal application: Suitable for any CNC machine with a compatible tool holder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be detected and corrected immediately without removing the tool. • Precise referencing: Useful for checking reference points, bores, and fixtures directly inside the machine setup. • Time savings: Makes external presetting devices unnecessary and reduces downtime. • Compact and robust design: Easy integration and operation within the tool changing system. Iiodpjx Hhkwsfx Ah Ajk This ATC measuring microscope transforms your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process safety.

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Isdjx A R U Uepfx Ah Ajik Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Leto izdelave: 2001, Stanje: dober (rabljeno), Bar diameter min. 18mm / max. 63mm Bar length min. 1000mm / max. 4200mm Isdpfxoi Dagcj Ah Asik

Stanje: dober (rabljeno), Leto izdelave: 1986, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8, število vreten: 1, STEUERUNG .. CNC upravljanje TRAUB TX 8 FUNKCIONALNOST .. Broj vretena: 1 .. Broj poprečnih klizača: 1 .. Broj revolvera: 1 .. Pogonjeni alati: da .. Broj c-osovina: 1 RADNI OPSEG - TOKARENJE - .. Maksimalni prečnik obrtaja: 450 mm .. Maksimalni prečnik tokarenja: 350 mm .. Maksimalni prečnik stezanja za rad sa šipkama: 60 mm .. Maksimalna dužina obratka: 490 mm GLAVNO VRETENO .. Opseg obrtaja do: 4000 /min .. c-osovina: da MAGACIN ALATA .. Broj pozicija alata: 12 ELEKTRIČNI PODACI .. Ukupna priključna snaga: 39 kW .. Priključni napon: 400 V .. Frekvencija mreže: 50 Hz DIMENZIJE / TEŽINA .. Potreban prostor -levo/desno-: 3150 mm .. Potreban prostor -napred/nazad-: 2100 mm .. Ukupna visina: 2100 mm .. Približna ukupna težina: 4000 kg Iodpsxxqbyjfx Ah Asik DODATNA OPREMA ZA TOKARENJE .. Konjić: da - Mašina u dobrom stanju Oprema: - kompletan set nosača alata (veoma obiman) - uključujući pogonske držače alata - dokumentacija

Leto izdelave: 2005, Stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Iedpfjhwnfkjx Ah Aoik Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Compatible with SAUTER tool turret with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) Ijdpfx Ajwpa Rujh Aeik - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: rabljeno, Leto izdelave: 1993, Tehnične podrobnosti: x-pomik: 400 mm y-pomik: 300 mm z-pomik: 400 mm Iedpfx Aju Idn Hjh Aeik Vrtljaji vretena: 8000 vrt/min Krmiljenje: Fanuc OM Vpenjalna miza: 500x300 mm Število mest v magazinu: 16 kosov Vpenjalo orodja: SK40 Razdalja delovno vreteno/vpenjalna površina maks.: 50-450 mm Število palet: 2 kosa Skupna potrebna moč: 10 kW Teža stroja pribl.: 2,5 t Mere stroja pribl. D x Š x V: 2,4x1,8x2,5 m Transportne mere stroja: 2,45x1,8x2,5 m - Električna omarica - Hladilna naprava - Transporter za ostružke proizvajalca META (transportna višina 1500 mm; širina 200 mm) Funkcija menjave mize ni v delovanju.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Traub TFT monitor zaslon TX8D TX8F TX8H nadomestni monitor nadomestni zaslon Tip: TFT (1) Kat. št.: 222549 Isdpfxox Adb Ie Ah Asik (2) Kat. št.: 10892558 Stanje: nov Traub TFT monitor/zaslon TX8D, TX8F, TX8H z okvirjem in kablom, 1 na 1 zamenljiv, 12" Plug and Play rešitev Ni originalni Traub del – 100% testirano, kompatibilno Izdelano pri cnc-markt GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Iisdpfx Ahjwuddvj Aek Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: dober (rabljeno), Interna št. artikla: 25090 Pogonski nosilec orodja Index / Traub Št.: W 7045003 B Zelo dobro ohranjeno stanje! Iodpfxexu Uz No Ah Aoik Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Includes extensive accessories. Isdju Eug Iepfx Ah Aeik

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We offer you a TRAUB TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in well-maintained, fully functional condition. Important note: This model comes equipped with only one turret. While the TNL 26 was also built in versions with two turrets, this is explicitly the version with a single turret. Technical data (summary) Manufacturer: Traub Iedpfx Ahjxgg Rmj Asik Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, mounted at the bottom, 12 tool positions, driven (live tool drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt type, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ready for operation; it is ideally suited for precise production of small and medium batch sizes in the automotive, medical, and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: viewings can be arranged at any time by appointment. For further information or to arrange a viewing, please do not hesitate to contact me at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Stanje: dober (rabljeno), Notranja št. artikla: 25091 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo dobro ohranjen! Isdpfx Asxvaqloh Ajik Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: dober (rabljeno), Interna št. artikla: 25088 Nosilec orodja Nosilec za navojno vrtinčenje vklj. z rezilnimi ploščicami Index / Traub Iedpsxu Dcvofx Ah Asik Št.: 12068219 Orodje je bilo v uporabi na stroju Traub TNL18 Zelo dobro ohranjen!

Stanje: dober (rabljeno), Interna številka artikla: 25093 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Iiodpfxsxvat To Ah Aok Zelo lepo ohranjen! Nosilec je bil v uporabi na stroju Traub TNL18