Traub Tna480 Tx8D nakup rabljenega (94)

Leto izdelave: 1983, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 320 mm, turning length: 1000 mm, spindle bore: 80 mm, spindle speed: 3150 rpm, travel X/Z: 265 mm / 1000 mm. Machine dimensions (L/W/H): approx. 5500 mm / 2400 mm / 2400 mm, weight: approx. 7000 kg, control system: Traub System TX-8. Includes a set of tools, 3-jaw chuck, and bar feeder with collets. Documentation available. On-site inspection possible. Pgsdpfewzld Djx Aafsu

Stanje: rabljeno, Leto izdelave: 1987, Control system: Traub TX 8D Swing diameter over cross slide: 660 mm Swing diameter over face slide: 445 mm Turning length: 1000 mm Spindle bore: 80 mm Spindle speed: 2,000 rpm Number of tool stations: 14 positions Chuck diameter: 250/315 mm Psdpfev Ig D Tex Aafogu Operating hours: approx. 39,794 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, displayed tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information are subject to change and error. Prior sale reserved!

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), A universal CNC lathe Traub is available. Swing diameter over bed/cross slide: 400mm/360mm, maximum/standard turning diameter: 360mm/320mm, maximum turning length: 1000mm, distance between centers: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14. Travel X/Z: 180mm/1000mm, feed rate: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Tailstock quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. Inspection on site is possible. Pgodpfxswrrq Es Aafju

Leto izdelave: 2005, Stanje: dober (rabljeno), 7 Driven Tool Holders suitable for CNC Lathe Manufacturer: TRAUB TNA 480 Tool Mount Size: VDI 40. Compatible with SAUTER tool turret with VDI 40 interface. 7 Horizontal units No. 3/4/5/6/7/8/9 for drilling and milling; price per unit: €550 2 Horizontal units No. 1 and No. 2 for thread tapping; price per unit: €600 Pgodpfxohwnfkj Aafou 1 NC drill chuck VDI 40, clamping range 1–13 mm; price: €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm; price: €150

Stanje: rabljeno, Leto izdelave: 1990, Tehnične podrobnosti: Premer struženja: 445 mm Dolžina struženja: 2000 mm Skupna potrebna moč: 34 kW Teža stroja pribl.: 7,5 t Prostorske mere pribl.: 6 x 2,5 x 2,2 m Premer struženja nad posteljnim vozičkom: 660 mm Premer vretena: 65 mm Hitrosti vretena: 16 - 3150 min⁻¹ Hitri pomik X-smer: 10 mm/min Hitri pomik Z-os: 15 m/min S CNC krmiljenjem TX 8 D C-os z gnanim orodjem Revolverska glava s 14 pozicijami Pgedpfx Aew I R Ndoafou Konjiček, luneta SMW SLK 520 N kot NC-os Transporter za odrezke in hladilni sistem

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Pgodow E Nnbjpfx Aafsu Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 1992, obratovalne ure: 83.492 h, številka stroja/vozila: IntNr231415, CNC lathe Traub TNS 26 DGY, 2 turrets, main and counter spindle Year of manufacture: 1992 Machining time: 83,492 hours Pgsdpfxsxrda Ns Aafou Control: Mitsubishi FR-SF System TX 8F Machine type: Double-spindle turning center with Y-axis and driven tools Main spindle: Bar capacity approx. Ø 26 mm Max. turning length 270 mm Max. spindle speed approx. 7,000 rpm Spindle external Ø 60 mm Drive power approx. 11 kW Counter spindle: Max. bar capacity approx. Ø 26 mm Spindle speed approx. 7,000 rpm Drive power approx. 5.5 kW Turrets / Tool Revolvers: 2 turret positions (upper and lower, i.e., two turrets) with driven tools Upper turret with Y-axis Tool holder e.g. to DIN 69880: 25 x 48 and 16 x 16 mm Driven tool stations per turret: 12 Max. speed: 8,000 rpm Power: 2.6 kW Torque: 4 Nm Main and counter spindle: C-axis Bar feeder STAMAG DN 26 Chip conveyor Ruez Manuals The machine is fully functional, both electrically and mechanically, and can be inspected under power by prior arrangement. Technical data and details subject to change, error, and prior sale!

Stanje: rabljeno, Leto izdelave: 2007, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Pgsdpfexnu S Ijx Aafsu Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool turret I (X/Y): Technology: Turret with 6 stations (all stations driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool turret II (X/Z): Technology: Turret with 6 stations (all stations driven) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front attachment: Number of stations: 4 Tool holder: ø28 mm Pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear attachment: Number of stations: 4 Tool holder: ø28 mm Pitch: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar feeder, FMB minimag 3200 Finished parts discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Mechanically prepared interface Tool holders: Various fixed holders Additional features: Blow gun

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Pgsdpfx Ajxpgl Aeafsu Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena! Krmilnik: TX 8 i-p GLAVNO VRETENO maks. premer palice: 32 mm maks. dolžina obdelovanca - dolgi način struženja: 245 mm - kratki način struženja: 125 mm maks. hitrost vretena: 6.400 /min C-os PROTIVRETENO maks. premer palice: 32 mm maks. dolžina vpenjanja obdelovanca: 250 mm maks. hitrost vretena: 6.000 /min C-os ZGORNJI REVOLVER ORODIJ Število postaj: 10 vse gnane maks. hitrost: 12.000 /min SPODNJI REVOLVER ORODIJ Število postaj: 9 vse gnane maks. hitrost: 12.000 /min Pjdjxrf Etjpfx Aafsgu ZADNJA ENOTA Število postaj: 8 od tega 3 gnane (T12, 13 in 14) Hitrost T12 & T14: 12.000 /min Hitrost T13: 4.000 /min Transportni trak za dele Transporter za ostružke KSS črpalka 20 bar IFS filter za oljno meglo Podajalec palic FMB turbo 3-36

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes Pgsdpfxexqd D Sj Aafju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Pgedpfx Aajwg Taksfju Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Leto izdelave: 2013, obratovalne ure: 55.000 h, Stanje: pripravljen za uporabo (rabljen), Obecné informace Hmotnost stroje: 7000 kg Řídicí jednotka Značka: TRAUB Model: TX8i-s Hlavní pohon Rozsah otáček vřetena: 8000 ot/min Počet os: 7 Pgodpfxjxn U D De Aafsu Přídavné vybavení Chladící čerpadlo 3 bar / chladící čerpadlo 8 bar Dopravník třísek, kloubový pás typu H=1000 mm Lineární odměřování osa X pro horní/dolní revolver Tkaninová filtrace chladicí kapaliny: stupeň filtrace cca 30-40 µm Vysokotlaké čerpadlo chladicí kapaliny 20 bar CO2 hasící systém Kraft & Bauer Tento 7osý horizontální soustruh TRAUB TNL 32-7 byl vyroben v roce 2013. Ideální pro přesné soustružnické operace, nabízí robustní výkon a spolehlivost. Využijte příležitosti koupit tento horizontální soustruh TRAUB TNL 32-7. Pro více informací nás kontaktujte. Typy použití Soustružení

Stanje: rabljeno, Leto izdelave: 2003, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8H, Description: Pedpsxiukmofx Aafogu Main Spindle: Technology: Belt-driven spindle Speed: 5,600 rpm Power: 18.5 kW Torque: 170 Nm Bar capacity: 42 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop Size 42 Sub Spindle: Technology: Belt-driven spindle Speed: 5,600 rpm Power: 11 kW Torque: 150 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop mini Axfix Size 42 Ejector: Hydraulic with flushing Tool Turret I (X/Y/Z): Technology: Turret with 10 stations Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 12.4 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: Turret with 10 stations Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 12.4 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished part removal: Hydraulic part gripper interface with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Other equipment: Various tool holders

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito podajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo – vodilne puše in vpenjalne tulce za glavno vreteno, protivreteno in podajalnik – za premere materiala od 3 do 12 mm. Pgedpfx Aoxmvf Hjafsu

Stanje: dober (rabljeno), - Krivinsko krmiljen avtomatski stružni stroj z vključenim dovožnim magazinom - maksimalni premer palice 25 mm - konjiček - teža cca 650 kg - dimenzije (DxŠxV) cca 1000 x 600 x 1500 mm Pedpfexpu A Ajx Aafsgu - 2 navpična držala orodij - 2 vodoravna držala orodij - podajalnik palic FMB, za dolžino palice 4200 mm

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, izvrtina vretena: 42 mm, največja hitrost vretena: 4.000 obr/min, moč vretenovega motorja: 7.500 W, Stroj je v stalni uporabi in proizvaja hidravlične priključke iz šestkotnika 22 (avtomatno jeklo). Zelo tog in učinkovit stroj za enostavne komponente. Stroj ima tangencialni navojni nastavek FETTE. Na voljo sta 2 taka stroja, eden izmed njih je opremljen s stranskim vrtalnim nastavkom ter nastavkom za rezkanje navojev z veliko garnituro rezkarjev. Oba stroja imata velik komplet držal in puš. Cena za oba stroja je predmet dogovora. Psdpfxexq Rz De Aafsgu

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Pjdet E Dbyepfx Aafsgu Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg Pgsdpfx Ajxlfk Noafsu OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Parts ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Psdpfx Aaoxhbfnofogu Tool Turret II (X/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic part gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, flushing gun

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Podjh Dzqlepfx Aafjgu

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i Pjdpeuhawhofx Aafogu - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: dober (rabljeno), Leto izdelave: 2000, Traub TNE 300 Year of manufacture: 2000 Control: TX 8 H Travel X/Z: 210 / 450 mm Turning length: 450 mm Turning diameter: 275 mm Psdpfjw Dp H Iex Aafsgu 8-position turret 3-jaw chuck Spindle speed up to 4,000 rpm Drive power: 11 kW Spindle bore: 65 mm Chip conveyor Machine without the visible bar feeder

Stanje: dober (rabljeno), Traub TNC 42/65 DGY, year 1996 Model: TX8F Pgodpfx Aajrgq Dvjfsu Turning length: 450 mm Main drive Spindle speed range: 4,000 rpm Spindle motor power: 18.5 kW Weight: 4,725 kg Accessories: chip conveyor, LNS Hydrobar bar feeder, and optical tool measurement system

Stanje: dober (rabljeno), Leto izdelave: 1995, Traub, TNC 42/65 DGY, year 1995 Model TX8F Turning length: 450 mm Main drive Spindle speed range: 4000 rpm Spindle motor power: 18.5 kW Weight: 4,725 kg Complete overhaul in 2015 Pgjdpfx Aaergq Ezofju Accessories: Chip conveyor, LNS Quick Load bar feeder