Traub Tns 30 42 nakup rabljenega (86)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Lhsdpfx Adsym A E Ieked Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Max. speed: 8000 rpm X-axis travel: 450 mm Lhjdpfxjym Ncys Adkod Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bearing diameter (front): 110 mm Tool mounts: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (L x W x H): 4354 x 2076 x 1917 mm Cross-section of tool slide (turning/milling support): 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Machine weight approx.: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Feed travel X-axis: 140 mm Feed travel Z-axis: 450 mm Feed travel Y-axis: 35 mm Ballscrew (Z-axis) (Ø x pitch): 32 x 10 mm Ballscrew (X-axis) (Ø x pitch): 32 x 5 mm Ballscrew (Y-axis) (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh (text seems garbled/unreadable) - Driven tools: Yes The machine can be inspected under power by prior arrangement.

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice: 65 mm maks. premer vrtenja: 175 mm maks. dolžina palice: 3.000 mm Krmiljenje: sistem TX 8F Lsdpfoxbtq Nox Adkjhd Hod – x: 140 mm Hod – z: 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena z nalagalnikom palic. Stroj je v dobro vzdrževanem stanju. Videoposnetke stroja na lokaciji z veseljem posredujemo na zahtevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Stanje: rabljeno, Leto izdelave: 2003, Največji premer palice: 65 mm Največja dolžina palice: 3.000 mm Krmiljenje: sistem TX 8H CNC stružnica | TRAUB - TNC 42/65 z vgrajenim podajalnikom palic. Stroj je v dobro vzdrževanem stanju. Video posnetke stroja na tovarniški lokaciji vam na zahtevo z veseljem posredujemo. Lhedpfxexbtp Ee Adkjd Tehnični podatki stroja sledijo v kratkem. Zahvaljujemo se vam za razumevanje! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 | TNC 42-65 | TNC 42/65

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Lodpfjv Scrhox Adkohd

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Ledpfx Adjxwn Ihekjhd

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Lhsdpjv Scrbefx Adksd

Stanje: dober (rabljeno), Leto izdelave: 1994, TRAUB TNS 65 D / 5-osni CNC stružno-rezkalni center - Krmiljenje TX8 D - Popolni tehnični podatki na slikah Ljdpfx Asyc Nnzjdkohd - Leto izdelave: 1994 - Podajalnik Hydrobar - Razni gnani držala za orodje - Držala za orodje - Trizverčnična glava - Popolna dokumentacija Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Lhjdpfx Adju Ix N Sekjd Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: zelo dobro (rabljeno), Multi-spindle & bar automatic lathes TRAUB TK 42 Lsdpfjwc Aqdex Adkohd * Spindle drive power: 5.5 – 9 kW * Max. workpiece length: 206 mm * Spindle bore: 42 mm * Length (L-R): 2500 mm * Width (F-B): 900 mm * Height: 1700 mm * Tool changer holder: 4 slides

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Lhjdpfx Ajt Hwq Dodkod Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, with bar feeder

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Lsdpfsx A Hdfsx Adkjhd

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, stružna dolžina: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Spindle bore: 42 mm Tool post: 4 slots MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Lhjdpfxjwtq Ufj Adkjd Height: 1,700 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 15.001 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 462, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h Lodpfx Aew Uiqyjdkjhd EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! TECHNICAL DETAILS Bar length: 3000 mm Lhodpfx Ajw Ec Alodkod Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: omejena funkcionalnost, izvrtina vretena: 42 mm, največja hitrost vretena: 4.000 obr/min, moč vretenovega motorja: 7.500 W, Stroj je v stalni uporabi in proizvaja hidravlične priključke iz šestkotnika 22 (avtomatno jeklo). Zelo tog in učinkovit stroj za enostavne komponente. Stroj ima tangencialni navojni nastavek FETTE. Na voljo sta 2 taka stroja, eden izmed njih je opremljen s stranskim vrtalnim nastavkom ter nastavkom za rezkanje navojev z veliko garnituro rezkarjev. Oba stroja imata velik komplet držal in puš. Cena za oba stroja je predmet dogovora. Lhsdpfx Asxq Rz Dodkjd

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Ljdpfjq Npqmsx Adkehd Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 110.000 h, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, Opis sledi Ljdpfxex A Ha Hj Adkohd

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 18.538 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 431, skupna masa: 7.000 kg, skupna širina: 2.000 mm, skupna dolžina: 11.000 mm, skupna višina: 1.900 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8i, TRAUB TNK 36 CNC Turning Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Power connection: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Positioning accuracy X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Distance: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Positioning accuracy X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Distance: 54 mm - X-axis travel: 73 mm Ljdpfx Aoyh Ivljdkehd - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Positioning accuracy X/Z: 0.0005/0.001 mm - Includes all tool holders shown in the photos, as well as a chip conveyor and coolant system from manufacturer Resy, and a bar feeder from FNB, model TURBO 5-42 Note: The item must be collected bindingly between 01 and 02 April 2026 on a date to be agreed. FCA D-79115 Freiburg – loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 344, skupna masa: 7.000 kg, skupna širina: 2.000 mm, skupna dolžina: 11.000 mm, skupna višina: 1.900 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8i, TRAUB TNK 36 CNC Lathe - Operating voltage: 460 V - Connection: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Applied force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm Ljdpfx Adoyh Hkzokjhd - Pitch: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Applied force X/Z: 2,800/2,120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Applied force X/Z: 4,240/4,240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Including the clamped tool holders visible in the photos, as well as a chip conveyor and a coolant system by Resy, plus a bar feeder by FNB, type: TURBO 5-42 Note: The item must be collected on a binding date to be agreed between April 1st and 2nd, 2026. FCA D-79115 Freiburg – loaded onto truck

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 Lhjdpsyvfwfjfx Adksd • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008,

Stanje: rabljeno, Leto izdelave: 1996, Prehod vretena: 80 mm Maks. premer struženja: 395 mm Maks. dolžina struženja: 750 mm Krmiljenje: Sistem TX 8H Maks. hitrost vretena: 3.150 obr./min CNC stružnica | TRAUB - TNA 400 Ledpfsxbtqvsx Adkshd Stroj je v dobro ohranjenem stanju.

Stanje: rabljeno, Leto izdelave: 1997, Prehod vretena 80 mm Največji premer struženja 460 mm Največja dolžina struženja 1.000 mm Krmilni sistem TX 8F Največja hitrost vretena 2.800 obr/min CNC stružnica | TRAUB - TNA 500 Ljdoxbtpxspfx Adkohd Stroj je v vzdrževanem stanju. Videoposnetke delovanja stroja na lokaciji vam na zahtevo z veseljem posredujemo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNA500 | TNA-500

Stanje: dober (rabljeno), Odmikač brusilnih plošč, odmikač lončastih plošč, odmikač za dvostranski brusilnik, odmikač za ploščinsko brusilko, odmikač za cilindrično brusilko, glava za oblačenje, glava za uravnavanje za brusilne stroje Lsdpod R Ikdofx Adkshd - Količina: 1 kos na voljo - Dimenzije: 325/130/V135 mm - Teža: 7,3 kg