CNC stružno-rezkalni center

Traub TNC42/65 DGY

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Laedpfxsv Scrbe Akcjh

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Obdelovalni center za struženje in frezanja GILDEMEISTER GMX 400, linearna izvedba z Y-osjo in frezalno vreteno. Letnik: 2003 Krmilni sistem: Sinumerik Power line Tehnični podatki: Moč pogona glavnega vretena ISM 90: 36/45 kW (100/40 %) Število vrtljajev glavnega vretena: Navor glavnega vretena: Premer obdelovanca: 90 mm Število mest v orodjarniku: 120 kosov Orodjarna glavnega vretena: HSK 63 Lasdjwzbq Tspfx Akcsh Moč pogona protivretena ISM 90: 36/45 kW (100/40 %) Število vrtljajev protivretena: Navor protivretena: Premer obdelovanca: 90 mm B-os / frezalno vreteno: Moč pogona: Število vrtljajev: Navor: Orodjarna: HSK 63 Y-os: +/- 110 B-os: +/- 120° Spodnji revolver: X-os: Z-os: Število vrtljajev pogonjenih orodij: Število mest v revolverju: 12 kosov Orodjarna: VDI 40 Dodatna oprema: - Sistem za odvajanje žagovine - Sistem za visok tlak s 20 bar - Priprava za 3D merilno tipalo - Funkcija vodila protivretena - Avtomatska drsna vrata

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Laodpfx Akjv Scrhjcjh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Lasdpfx Akjym A E Ijcjh Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX8i-s, _____ Opis: Glavna vretena: Tehnologija: Vreteno z motorjem Število vrtljajev: 5.000 vrt/min Moč: 22,6 kW Navor: 180 Nm Lajdpfjzr Dd Ujx Akcsh Premer vretena: 65 mm Naprava za vpenjanje obdelovanca: Vpenjalna glava, Hainbuch Spanntop Kombi Axfix, velikost 65 Proti-vreteno: Tehnologija: Vreteno z motorjem Število vrtljajev: 5.000 vrt/min Moč: 22,6 kW Navor: 180 Nm Naprava za vpenjanje obdelovanca: Vpenjalna glava, Hainbuch Spanntop Kombi Axfix, velikost 65 Izmetnik: Hidravlični, z možnostjo izpiranja Nosilec orodja I (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Nosilec orodja II (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Nosilec orodja III (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Oprema/dodatna oprema: Upravljanje z odrezki: Transporter za odrezke Upravljanje s hladilom: IKZ sistem s filtrom iz papirnate traku in visokim tlakom, 80 bar Kontrola temperature hladila: Priprava za priključitev zunanjega hladilnega sistema, Deltatherm Dovod surovega materiala: Avtomatski podajalnik kratkih palic, FMB SL 80S Odstranjevanje končnih izdelkov: Portalni sistem za dvigovanje izdelkov (krmiljen z NC), s tekočim trakom Sesalnik za oljne hlape: Elektrostatični separator, LTA AC3001 Dodatna oprema: Različni rabljeni fiksni nosilci orodja

Stanje: rabljeno, Trodimenzionalni koordinatni merilni stroj MITUTOYO Crysta-Apex S574 Ledpfoy Ufkkex Akcsah

Stanje: dober (rabljeno), Leto izdelave: 1999, Vsa dodatna oprema, prikazana na slikah, je vključena. Tehnične podrobnosti so prikazane na sliki. Lsdsww Irispfx Akcjah

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 Lajdsuhav Dopfx Akceh - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis, and B-axis, designed for complete machining of turning-milling components. Integrated spindle motors (ISM) on main and counter spindles with a liquid-cooled thermal compensation system. Drive output: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Counter spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Counter spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute cutting forces across two axes, resulting in extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. Swivel range of 210° is steplessly adjustable and can be interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control, includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through counter spindle * 12-position radial VDI 30 tool turret with directional logic for up to 12 live tool stations Swivel speed adjustable via feed switch Performance data: Max. 6.7 kW at 2650 rpm Constant torque: 25 Nm Speed range: 0–5000 rpm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming * Finished part catcher * Sinumerik 840D Lsdpfx Aexz Ab Rekcoah * Chip conveyor with programmable discharge height of 1200 mm (type "hinge belt") * Coolant system integrated in chip conveyor 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 rinse pumps with 3.7 bar * Electrical cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Turning window - Cleaning pistol - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC dvovreteni stružni stroj Gildemeister z Y-osjo. Prehod palice: 32 mm, orodjarna: 2x12, hitrost glavnega in kontra vretena: 8000 obr/min, krmiljenje: Siemens Sinumerik 840D Powerline, obratovalne ure: 39.426 h, ure vretena: 25.529 h. Vključuje KSS napravo, orodja in nalagalnik kratkih palic 1500 mm Iemca Vip 80E. Dokumentacija je na voljo. Ogled na lokaciji je možen. Približno na voljo od konca aprila 2026. Ledpfsygw Svjx Akcjah