CNC stružnica z dvojnim vretenom

Traub TNC 42/65 DGY

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V Dodowpa Ruopfx Aflsul - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, MCS Jigger High Temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Completely overhauled in 2002. Dsdpsfqmx Tofx Afljul Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roll diameter: 324 mm Additives tank.

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Dujdpfx Afjv Scrhslol

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Dujdpfsxpgl Aex Afljl X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Technical data: Working length: 3550 mm Distance between uprights: 3050 mm Press force: 230 tons CNC control: CYBELEC ModEva 12S Controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Installation height: 745 mm (extra high) Dusdpfowntqxjx Aflsl Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled CE marking Motor power: 42 kW Dimensions (L x W x H): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front 1 pc. CNC-controlled bending aid, rear!!! The seller is not liable for typographical or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Duedpfx Afowuddvjlsl Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: rabljeno, Leto izdelave: 2000, Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turning length: 3000 mm Control: SIEMENS 840 D Number of tool stations: 12 Number of driven tools: 6 Spindle bore: 103 mm C-axis: yes Scope of delivery – Basic machine: - SINUMERIK 840 D - 3 CNC-controlled axes - Swing diameter over bed: 520 mm - Turning diameter over cross slide: 480 mm - Tool turret with 12 VDI 50 mm shank holders - 1-speed AC main drive, 53 kW, 50% duty cycle - Speed range: 30 – 3000 rpm - Main spindle head Size 8 - Draw tube for clamping devices - Chip conveyor TURNING LENGTH: 3000 mm 12 cylindrical shank holders DIN 69880-50x78, of which 6 positions can be fitted with driven tools (power: 6 kW at 60% duty cycle, speed range: 20–2500 rpm), 2 gearbox stages C-AXIS - Speed range: 0–20 rpm - Maximum programmable angle: 9999.999° - Working area as per working space diagram POWER CHUCK 3 NHF 315-82 A8 Manufacturer: FORKARDT With centrifugal force compensation External Ø 315 mm, bore Ø 82 mm With hardened, reground top jaws Bar stock Ø max. 63 mm Including draw tube and mounting Djdpfx Afowp S Sqjlsul

Stanje: novo, Dimensions (L x W x H): 1610 x 460 x 920 mm Weight: 93.5 kg Number of drawers: 20 pcs. Workshop trolley with 20 drawers and 40 mm solid wood worktop. Fixed, double ball-bearing drawer slides; anti-slip mat in each compartment. Heavy-duty rubber top mat, central locking system, 6 heavy-duty castors (125 mm), including 4 swivel castors with brakes. Central locking system for all drawers. Duodpfxeu Iml Us Aflsl Anti-slip mat in each compartment. Robust, double ball-bearing slides for drawers. All drawers are 100% extendable.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Elektrodenwechsler: X-Achsen-Verfahrweg (mm): Y-Achsen-Verfahrweg (mm): Z-Achsen-Verfahrweg (mm): CNC-Steuerungstyp: Arbeitsbehälter Länge: Arbeitsbehälter Breite: Arbeitsbehälter Höhe: Tischlänge: Tischbreite: Max. Werkstücklänge: Max. Werkstückbreite: Djdpfxewnfcgo Afleul Max. Werkstückhöhe: Max. Werkstückgewicht (kg): Max. Bearbeitungsstrom (A): Abmessungen (L x B x H): Gewicht (kg): Geleistete Betriebsstunden: Die technischen Daten und Abbildungen sind unverbindlich. Sie stellen keine zugesicherten Eigenschaften dar und können Änderungen unterliegen.

Stanje: zelo dobro (rabljeno), Tuscan LC38 x 3000mm CNC stružnica Premer obdelovanca nad posteljo: 970 mm Premer obdelovanca nad prečnim suportom: 420 mm Višina konjička: 490 mm Razdalja med konicama: 3000 mm Dusdpfxsvtw Imo Afljl 12-postajni Duplimatic revolver Konjiček Priključek za vrtalno palico Vrtalna palica 2x tritočkovna fiksna luneta 1x premična luneta Krmiljenje Fanuc OiTC C-os & pogonjena orodja Serijska številka: LC223806086 Leto izdelave: 2010/10