Tnl nakup rabljenega (46)

Stanje: dober (rabljeno), Interna št. artikla: 25090 Pogonski nosilec orodja Index / Traub Št.: W 7045003 B Ihedexu Uz Nopfx Af Tst Zelo dobro ohranjeno stanje! Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: dober (rabljeno), Benzinger TNL / TRP I CNC Fine Turning Lathe Ihjdpfehufc Ejx Af Tet Machine specifications according to manufacturer, deviations possible. Center height: 80.5 mm Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel distance in X: 300 mm Max. travel distance in Z: 240 mm Power supply: 380 V 50 Hz CNC numerical control: Bosch CC 100 T Accessories / special equipment: TRP swiveling loader Complete factory closure. Wide selection of mezzanine floors, pallet racks, shelving racks, vertical carousels. High-quality industrial machines, lathes, grinding machines, hand tools. Further items – new and used – can be found in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Ijdpox E Inmsfx Af Tjht Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar loader, FMB Minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Mechanical interface prepared Tool holders: Various static and driven holders

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 10.000 obr/min, skupna masa: 5.000 kg, skupna širina: 1.500 mm, skupna dolžina: 4.000 mm, skupna višina: 2.400 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 40 m/min, moč: 24 kW (32,63 KM), pomik po osi Z: 205 mm, Oprema: dokumentacija / priročnik, Nudimo naprodaj enega izmed naših strojev, ki ga izločamo kot del načrtovane obnove našega strojeparka. Stroj je TRAUB TNL 18P stružnica z drsnim vretenom, letnik 2013, ki je v dobrem tehničnem stanju. Razlog za prodajo je nabava nove tehnologije v okviru nadgradnje strojeparka. Trenutne delovne ure znašajo 43.000. Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito dovajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo, vključno z vodili in vpenjalnimi vložki za glavno vreteno, protivreteno in podajalnik palic, primerno za materiale do premera 12 mm. Ihodpfjxdk Uksx Af Tot Za več informacij me prosim kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, For sale is a high-precision INDEX TRAUB TNL 32-7 in absolutely top condition. This machine is a former TRAUB showroom model with full equipment. It was purchased at the end of 2016 and has been exceptionally well maintained ever since. The machine is sold with an extensive tooling package. The included tool holders alone (including numerous driven double and triple holders) have a replacement value of approximately €25,000 to €30,000. This makes the machine an ideal solution for companies looking to start complex production immediately without time-consuming additional investments. • Flexibility: The machine can be used in both Swiss-type (sliding headstock) and fixed headstock turning modes—a decisive advantage for changing production requirements. • Condition & usage: The machine has always been operated with oil (no emulsion!) and approx. 95% of the work involved stainless steel. This has resulted in outstanding mechanical condition. • Accessories package: The machine comes with a very extensive set of tool holders, including many driven holders (also double and triple holders). Numerous collets for main and sub spindle, as well as multiple channels for bar feeder operation, are included. • Documentation: The original order confirmation detailing the full equipment is available for inspection. IMPORTANT NOTE REGARDING SALES (BUNDLE DEAL): I am currently selling a total of three high-quality lathes. In addition to this TNL 32-7, two TRAUB TNK 36 machines are also available for purchase, which can also be found here on Machineseeker. If all three machines are purchased in a package, I offer an unbeatable total price! In case of complete purchase, I will also include substantial extras that are not part of the standard delivery, such as additional chip carts (several included), various tools, and workbenches—everything needed for immediate production start-up. - Location: 79115 Freiburg (DE) - Availability: The machine is powered, can be demonstrated, and is immediately available. - Scope of delivery: Includes tool holders, collets, and complete documentation. • Year of manufacture: 2014 (commissioned end of 2016) • Condition: Very well maintained, oil-operation • Control: TRAUB TX8i-s • Working range: Bar capacity Ø 32 mm • Spindles: Main and sub spindle (both up to 8,000 rpm & C-axis) • Tool carriers: • Upper: 10 stations (Dual Drive) • Lower: 9 stations (separate sub spindle drive) • Rear: 8 stations (prepared for internal coolant supply) • High-pressure package: ECO-Fluid system with frequency-controlled pump (20–80 bar) – perfect for oil operation and tough materials. • Precision package: Additional glass scales on X-axes. • Cooling & filtration: Paper band filter (50 µm) and air-cooled immersion chiller (4.5 kW). • Safety: Automatic CO2 fire extinguishing system (Kraft & Bauer) – essential for safe oil operation – and coolant mist extraction. Ijdpfsx Sr I Rox Af Tsht • Software: Extensive packages for Polyform, helical turning, polygon turning, and gear hobbing. Automation & peripherals • Bar feeder: FMB Turbo 3-36 (up to 3,200 mm bar length) incl. shifting device. • Parts removal: Integrated parts gripper and conveyor belt for gentle part removal. Price: On request (attractive bundle deal)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 6.700 W, stružna dolžina: 305 mm, premer struženja nad prečnim suportom: 32 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 1 obr/min, premer struženja: 32 mm, izvrtina vretena: 32 mm, skupna masa: 7.350 kg, vrsta vhodnega toka: trifazni, prehod palice: 32 mm, dolžina podajanja os X: 140 mm, dolžina pomika po osi Y: 65 mm, dolžina podajanja os Z: 305 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, CNC Swiss-Type Automatic Lathe Manufacturer: Traub Model: TNL 32 T-9 Control: TX8i-s Year of manufacture: 2013 Location: Sweden, still in production Delivery window: from January / February 2026 Operating hours: approx. 40,000 h Technical Data Spindle bore (mm): 32 Max. spindle speed (rpm): 8,000 Power (100% / 25% duty cycle) (kW): 6.7 / 10.7 Torque (100% / 40% duty cycle) (Nm): 21 / 32 C-axis resolution (degrees): 0.001 Z-axis travel (mm): 305 / 127 (Swiss-type / fixed head) Rapid traverse Z (m/min): 20 Counter Spindle Spindle bore (mm): 30 Max. spindle speed (rpm): 6,400 Power (100% / 25% duty cycle) (kW): 3.7 / 5.5 Torque (100% / 40% duty cycle) (Nm): 29.4 / 43.7 C-axis resolution (degrees): 0.001 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Z-axis travel, rapid traverse (mm / m/min): 300 / 20 Tool Carrier 1 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Y-axis travel, rapid traverse (mm / m/min): -40/+25 / 20 Z-axis travel, rapid traverse (mm / m/min): 300 / 20 Tool Carrier 2 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Y-axis travel, rapid traverse (mm / m/min): -25/+40 / 20 Z-axis travel, rapid traverse (mm / m/min): 320 / 20 Dimensions, Weight, Power Supply Weight: 7,350 kg (depending on equipment) Connected load (kW): 28 Additional Equipment - Chip conveyor - External tank with paper band filtration system - Bar loader: FMB Turbo 3-36, 4.2 m bar length - Guide bushings, collets, magazine bushings (?) - Tool holders, driven and static - Documentation - High-pressure coolant system - Fire extinguishing system + control unit Kraft & Bauer Ihjdex Rwkuopfx Af Tot Operator screen and hard drive were replaced in spring 2025 (approx. €24,000 incl. service costs) New drive belts for main spindle and driven tools have recently been replaced Scheduled maintenance carried out In 2019–2020, multiple extensive and costly overhauls were performed on spindles and drive units, including new bearings and a new motor. At 27,000 operating hours All information provided to the best of our knowledge and belief; errors excepted Subject to prior sale All prices are net, excluding VAT, and without transport costs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 12.000 obr/min, premer struženja: 32 mm, skupna masa: 7.000 kg, hitri pomik na osi Z: 20 m/min, moč: 10,7 kW (14,55 KM), Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, C-os Zgornji revolver za orodja z osmi X/Y/Z/H z 10 orodnimi mesti Spodnji revolver za orodja z osmi X/Y/Z/H z 9 orodnimi mesti Zadnja enota z 8-kratnim pogonom za 3 orodja Tečajni trakasti transporter Papirni trakasti filter Resy Nadzor orodij Traub Ihedpfxox Digls Af Tst Magazin za nalaganje palic FMB LSK 38

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena! Krmilnik: TX 8 i-p GLAVNO VRETENO maks. premer palice: 32 mm maks. dolžina obdelovanca - dolgi način struženja: 245 mm - kratki način struženja: 125 mm maks. hitrost vretena: 6.400 /min C-os PROTIVRETENO maks. premer palice: 32 mm maks. dolžina vpenjanja obdelovanca: 250 mm maks. hitrost vretena: 6.000 /min C-os ZGORNJI REVOLVER ORODIJ Število postaj: 10 vse gnane maks. hitrost: 12.000 /min Ihedpfexrf Etox Af Tet SPODNJI REVOLVER ORODIJ Število postaj: 9 vse gnane maks. hitrost: 12.000 /min ZADNJA ENOTA Število postaj: 8 od tega 3 gnane (T12, 13 in 14) Hitrost T12 & T14: 12.000 /min Hitrost T13: 4.000 /min Transportni trak za dele Transporter za ostružke KSS črpalka 20 bar IFS filter za oljno meglo Podajalec palic FMB turbo 3-36

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Ihodpfxox Hxv Ds Af Tjt Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Glavni pogon Število osi: 9 Hitrost vretena: 8000 vrt/min Ta 9-osni švicarski stružni stroj TRAUB TNL 32 je bil izdelan leta 2014. Opremljen je z upravljanjem TX8i-s s 64-bitnim RISC CNC/PLC procesorjem, barvnim TFT zaslonom in elektronskim ročnim kolesom. Glavno vreteno omogoča premer izvrtine 32 mm, stroj pa vključuje tudi podvreteno z osjo C. Ponuja dvojno gnano zgornjo orodjarno in spodnjo orodjarno z devetimi držali za orodja. Razmislite o nakupu tega švicarskega stružnega stroja TRAUB TNL 32. Za več informacij nas kontaktirajte. Ihsdsx D Drcspfx Af Tjt Vrste uporabe Struženje

Stanje: dober (rabljeno), Notranja št. artikla: 25091 Pogonski nosilec orodja Nastavljiva kotna glava Ihodpfx Aoxvaqljf Tjt Index / Traub Št.: W 7045011A Zelo dobro ohranjen! Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We offer you a TRAUB TNL 26 CNC Swiss-type automatic lathe, year of manufacture 2004. The machine is in well-maintained, fully functional condition. Important note: This model comes equipped with only one turret. While the TNL 26 was also built in versions with two turrets, this is explicitly the version with a single turret. Technical data (summary) Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, mounted at the bottom, 12 tool positions, driven (live tool drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt type, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ready for operation; it is ideally suited for precise production of small and medium batch sizes in the automotive, medical, and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex location, ex works Inspection: viewings can be arranged at any time by appointment. Ihjdoxgg Rmepfx Af Tjt For further information or to arrange a viewing, please do not hesitate to contact me at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Ijdpfswg Takox Af Tjht Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1996, številka stroja/vozila: 6946, CNC stružnice z največjo zmogljivostjo obdelave palic 50,8 mm in dolžino obdelave 584,2 mm Ihjded S U Dropfx Af Tot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 49.274 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 247, stružna dolžina: 80 mm, največja hitrost vretena: 12.000 obr/min, dolžina podajanja os X: 35 mm, dolžina pomika po osi Y: 37 mm, dolžina podajanja os Z: 75 mm, Premer palice (maks.): 12 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Turret I (X/Y) Technology: 6-station turret (all stations powered) Tool holder: Ø 25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Ihedpfx Aovrz E Hjf Tet Installation dimensions: 7,943 x 1,430 x 1,480 mm Control on-time: 96,171 h Machine on-time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump - Raw material feeding: Bar loader, FMB minimag 3200 - Finished parts discharge: Finished part removal system (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various static and driven holders

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] Iedpfsuhawhox Af Teht - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: dober (rabljeno), Interna št. artikla: 25088 Nosilec orodja Nosilec za navojno vrtinčenje vklj. z rezilnimi ploščicami Index / Traub Isdpfx Afexu Dcvj Tsht Št.: 12068219 Orodje je bilo v uporabi na stroju Traub TNL18 Zelo dobro ohranjen!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 8.000 obr/min, prehod palice: 32 mm, model krmilnika: Traub TX8i-S, število mest v zalogovniku orodij: 12, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer prehoda palice: 26 / 32 mm Maks. hitrost glavnega vretena: 8.000 obr/min Osi: X1 / Y1 / Z1, C-os integrirana v glavno vreteno Revolver: 1 Število orodij: 12 Pogonska moč: 6,7 kW (100 % ED) / 10,7 kW (40 % ED) Navor: 21 Nm (100 % ED) / 32 Nm (40 % ED) PODROBNOSTI O STROJU Čas vklopa: 116.721 h Obratovalne ure: cca 48.000 h Krmiljenje: Traub TX8i-S Dimenzije & teža Iedpfx Afoxlfk Nj Teht Dimenzije (D × Š × V): cca 4,4 × 1,4 × 1,7 m Teža stroja: cca 4.000 - 4.200 kg OPREMA Transporter za ostružke: lamelni trak, višina izmeta cca 950 mm

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units Ijdpfx Afot E Dbye Toht - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Ihsdpfx Ashlp Sdef Tst Condition: used, well maintained Sale without any warranty

Stanje: rabljeno, CNC dolgo stružni avtomat TRAUB TNL 12/7 Ijdpsxbtz Usfx Af Teht

Stanje: dober (rabljeno), Interna številka artikla: 25093 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo lepo ohranjen! Iedjxvat Tspfx Af Toht Nosilec je bil v uporabi na stroju Traub TNL18

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT Ihodpfxjuhav Dj Af Tst - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: dober (rabljeno), Interna številka artikla: 25092 Poganjalo držalo orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Zelo dobro ohranjeno stanje! Držalo je bilo uporabljeno na stroju Traub TNL18 Iodpfx Afjxvazko Tjht

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] Iodouhaw Uspfx Af Tjht ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag