Avtomatska stružnica

Traub TNL 12/7

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 13.0 - Material tolerance (DIN 671) (mm): Ø Xh9 - Collet chuck (optional): Through-hole - Guide bush (optional): Through-hole - Max. turning length / spindle stroke: -- With fixed guide bush (mm): 130 -- With rotating guide bush (mm): 80 -- With programmable guide bush (mm): 80 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 - Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Tool stations (qty): 6 (12) - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Tool stations (qty): 6 - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Drive for Tool Carriers 1 and 2 - Speed (rpm): 0...8000 - Maximum number of tools: 2x6 - Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 13.0 - Max. longitudinal stroke (23, 24 / X3) (mm): 140 | 228 - Rapid traverse (23, 24 / X3) (m/min): 30 - Tool stations (qty): 4 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 Rear Attachment, Synchronized / Fixed - Z travel, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (qty): 3 Rear Attachment (X4 Axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 Ksdpjyr N Dzofx Al Nedk - Tool stations (qty): 4 Tool Drive for Rear Attachment (with X4 axis) - Speed: 0...10,000 rpm - Max. number of driven tools: 4 - Clamping diameter for drilling tools -- Driven (mm): 0.5 - 7 -- Non-driven (mm): 0.5 - 10 Coolant System - Pump pressure, single stage (bar): 3 - 120 bar pump for front/rear attachment - Tank capacity (l): 180 - Delivery rate (l/min): 40

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 67 kW (91,09 KM), obratovalna teža: 9.800 kg, Leto izdelave: 2005, številka stroja/vozila: CAT0432DKWEP01798, odlično stanje Kedpjylmkxsfx Al Njdk

Stanje: rabljeno, TECHNICAL DATA Kedpfxsuhav Do Al Njdk - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Kedpfxjuhaw Us Al Nsdk - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 265864, premer struženja: 350 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 35 obr/min, potovalna razdalja osi X: 195 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15 W, hitrost pomika os X: 30 m/min, hitrost podajanja os Z: 33 m/min, vrtilni moment: 233 Nm, razdalja od središča mize do nosu vretena: 687 mm, Oprema: dokumentacija / priročnik, Mazatrol Smart krmilnik. Hitrost vretena: 5000 vrtljajev na minuto. Pomik X/Z: 195 mm/560 mm. Opremljen s premerom 215 mm. 3-čeljustna pogonska vpenjalna glava. 12-postajni revolver. Kdodpevfm H Asfx Al Nok Konjiček. Merilna sonda za orodje. Lovilec obdelovancev.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing Kodpfjuhaxfex Al Nedk - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 Kdodpfx Aouhawzsl Nek - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: dober (rabljeno), Leto izdelave: 2001,

Stanje: rabljeno, CNC dolgo stružni avtomat TRAUB TNL 12/7 Kjdpjxbtz Uofx Al Nedk

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6,000 rpm, spindle power: 8.5 kW, tool holder: SK40, tool magazine capacity: 22 stations, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control unit: Heidenhain TNC 426. An on-site inspection is possible. Ksdev Uqb Nepfx Al Nsdk