CNC stružnica švicarskega tipa

TRAUB TNL 12/7

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 13.0 - Material tolerance (DIN 671) (mm): Ø Xh9 - Collet chuck (optional): Through-hole - Guide bush (optional): Through-hole - Max. turning length / spindle stroke: -- With fixed guide bush (mm): 130 -- With rotating guide bush (mm): 80 -- With programmable guide bush (mm): 80 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 - Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Tool stations (qty): 6 (12) - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Tool stations (qty): 6 - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Drive for Tool Carriers 1 and 2 - Speed (rpm): 0...8000 - Maximum number of tools: 2x6 - Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 13.0 - Max. longitudinal stroke (23, 24 / X3) (mm): 140 | 228 - Rapid traverse (23, 24 / X3) (m/min): 30 - Tool stations (qty): 4 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 Rear Attachment, Synchronized / Fixed - Z travel, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (qty): 3 Rear Attachment (X4 Axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (qty): 4 Tool Drive for Rear Attachment (with X4 axis) - Speed: 0...10,000 rpm - Max. number of driven tools: 4 - Clamping diameter for drilling tools -- Driven (mm): 0.5 - 7 Kdedpfeyr N Dzex Al Nok -- Non-driven (mm): 0.5 - 10 Coolant System - Pump pressure, single stage (bar): 3 - 120 bar pump for front/rear attachment - Tank capacity (l): 180 - Delivery rate (l/min): 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 206432, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, hod izmetalca: 225 mm, skupna masa: 7.450 kg, Oprema: dokumentacija / priročnik, Here we are offering, as an injection moulding machine dealer, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantages for Used Machines: From 01.07.2025, used machines can additionally benefit from a special depreciation allowance of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial Number: 206432 Year of construction: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Kedpfx Alsw Tt R Is Njdk Condition: Very well maintained – German origin Extras: - Complete thermoplastic cylinder, 50 mm, highly wear-resistant - Screw in HC-design instead of standard - Selogica direct control system - Hydraulic unit with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip extended 50 mm - Band heater for open nozzle - Band heater for extended nozzle tip - Central clamping platen set 570, Ø 125 mm - 2 ejector air blow-off units with pressure regulator - Connection for air blow-off unit 1 - Selector unit connection - Core puller 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (to EUROMAP 67), 50-pin - Host computer interface ARBURG - Additional power connections: 1 CEE, 1 Schuko - Serial printer interface USB - CompactFlash interface for data storage - Operation authorization via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for dosing/coloring unit - Free manual cooling circuits - Machine-related cooling circuits regulated - Equipment package: Advanced Monitoring - Equipment package: Extended Movements - Equipment package: Production Control - Equipment package: Optimization/Operator Assistance - Equipment package: Quality Assurance - Equipment package: Documentation Complete documentation included Injection Unit: - Screw diameter: 50 mm - Shot weight: 359 g/PS - Injection pressure: 2000 bar - Shot volume: 392 ccm Clamping Unit: - Clamping force: 200 t / 2000 kN - Tie bar distance: 570 x 570 mm - Mounting platens: 795 x 795 mm - Mold height: 300 mm - Max. platen distance: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Motor output: 22 kW Heating capacity: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hanover, Germany and has been tested. Warranty: Warranty is valid until initial commissioning. Loading/Shipping: Loaded free onto buyer’s truck or delivered free to buyer’s premises (shipping charges apply) Available from our warehouse in Hanover, Germany Information about our offered machines and our company: - We only sell our own machines, acquired from ongoing production, from our Hanover warehouse - All machines offered are tested and checked prior to dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and servicing are standard practice - All offered machines are available for inspection at our warehouse

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder Kdsdpjt E Dbysfx Al Njk - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] Kodpfjuhaw Uex Al Nedk ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: dober (rabljeno), Leto izdelave: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS: - X: 1,270 mm - Y: 660 mm - Z: 635 mm DISTANCE BETWEEN TABLE SURFACE AND SPINDLE NOSE: 178 – 813 mm TABLE: - DIMENSIONS: 1,321 x 584 mm - LOAD CAPACITY: 1,815 kg - NUMBER AND SIZE x PITCH OF T-SLOTS: 7 slots, 14 mm x 80 mm spacing SPINDLE: - ROTATIONAL SPEED: 8,000 rpm - SPEED RANGES: 2 - SPINDLE TAPER: ISO 40 - HIGH PRESSURE / THROUGH-SPINDLE COOLANT FEED RATES: - RAPID TRAVERSE: 18,000 mm/min Kdodpevf Nw Dofx Al Nek - WORKING FEED RATE: 12,700 mm/min - JOG: 0 – 1,260 mm/min TOOL MAGAZINE: 24 positions POWER: 15 kW WEIGHT: 7,000 kg YEAR OF FIRST INSTALLATION: 2008

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD Kdodpouhaxfofx Al Nsk - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher Kedpouhawzsfx Al Nedk - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 2.000 mm, merilno območje os Z: 1.000 mm, Measuring ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld terminal: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe change system: Renishaw (Price REVO approx. €80,000 new) Software: Inspect3D Inca V6 new license (all languages) Original year of construction: 2014, modernized in 2017 and 2025 Exchange for another CMM possible Kdododv I Abspfx Al Njk

Stanje: rabljeno, CNC dolgo stružni avtomat TRAUB TNL 12/7 Kedpfsxbtz Ujx Al Nsdk

Stanje: dober (rabljeno), Leto izdelave: 1988, dolžina brušenja: 1.000 mm, širina brušenja: 550 mm, višina brušenja: 400 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Availability: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electric straight dressing device with compensation Vertical digital readout Mount for grinding wheel max. 400 x 100 x 127 mm Kdedpfju Rqynjx Al Nsk Spindle motor 7.5 kW, 1435 rpm Adjustment wedges Coolant system with universal paper band filter Complete documentation