CNC stružnica švicarskega tipa

TRAUB TNL 12

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 13.0 - Material tolerance (DIN 671) (mm): Ø Xh9 - Collet chuck (optional): Through-hole - Guide bush (optional): Through-hole - Max. turning length / spindle stroke: -- With fixed guide bush (mm): 130 -- With rotating guide bush (mm): 80 -- With programmable guide bush (mm): 80 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 - Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Tool stations (qty): 6 (12) - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Tool stations (qty): 6 - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Drive for Tool Carriers 1 and 2 - Speed (rpm): 0...8000 - Maximum number of tools: 2x6 - Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 13.0 - Max. longitudinal stroke (23, 24 / X3) (mm): 140 | 228 - Rapid traverse (23, 24 / X3) (m/min): 30 - Tool stations (qty): 4 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 Iedpfx Aoyr N Dzedkoap Rear Attachment, Synchronized / Fixed - Z travel, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (qty): 3 Rear Attachment (X4 Axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (qty): 4 Tool Drive for Rear Attachment (with X4 axis) - Speed: 0...10,000 rpm - Max. number of driven tools: 4 - Clamping diameter for drilling tools -- Driven (mm): 0.5 - 7 -- Non-driven (mm): 0.5 - 10 Coolant System - Pump pressure, single stage (bar): 3 - 120 bar pump for front/rear attachment - Tank capacity (l): 180 - Delivery rate (l/min): 40

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Isdpst Uw Avjfx Adkjap Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Stanje: rabljeno, Leto izdelave: 2008, Premer struženja 12,7 mm Dolžina struženja 50 mm Krmiljenje Traub System TX 8i Število vrtljajev 12.000 vrt/min C-os 0,001° Postaja za prijem 12,7 mm Število vrtljajev 12.000 vrt/min Hitri pomik 15 m/min Revolver glava (x-krat) 6 Sistemi orodij 5+3 Sistemi orodij 3 orodja sistemi Skupna priključna moč 2,5/4 kW Teža stroja pribl. 2 t Potreben prostor pribl. 2,4 x 1,1 x 1,7 m Iajdsygm R Ispfx Adkop CNC kratkostrugalni stroj Traub TNL 12K z avtomatskim podajalcem LNS Tryton 112 Pogon S8 (hrbtna obdelava z gnanimi orodji) prisoten Pogon S7 (sprednja obdelava z gnanimi orodji) prisoten

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Iasdox Hxv Dspfx Adkjp Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm • Dimensions: 900x750x950mm • Weight: approx. 170 kg Iasdpfodz Er Rex Adkjp • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Manufacturer's sample image (sister device)

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm Isdpjt E Dbysfx Adkoap SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: zelo dobro (rabljeno), Traub TNL12 CNC Swiss Zmogljivost: 12 mm Obratovalne ure: 25.596 h Ijdpfxow R E Ade Adkoap Sistem za gašenje požara Kraft & Bauer Papirni filter: Kompaktni tračni filter Konfigurirano kot na sliki (več fotografij sledi) V proizvodnji od leta 2009 (prvotno razstavni model) 12-ft podajalnik palic FMB Lovilec oljne megle Transporter za ostružke „Na voljo 2 stroja“

Stanje: rabljeno, Leto izdelave: 1998, Višina konic 125 mm Razdalja med konicama 400 mm Krmiljenje FANUC 21i Premer diska maks. 406 mm Dimenzije diska 406 x 127 x 40 mm Teža obdelovanca 30 kg Hod vzdolžnega sani 483 mm Hod prečnega sani 254 mm Skupna priključna moč maks. 20 kVA Teža stroja pribl. 4,0 t Potreben prostor pribl. 3,0 x 2,0 x 2,1 m vključno z 2 notranjima brusilnima vretenoma vključno z B-osjo 1° Hirt, krmiljena vključno s C-osjo vključno s Quick-Set merilno sondo Iaodpjxwdwfofx Adkop vključno s Sensitronom vključno z hidravličnim nagibnim dreserjem vključno z magnetskim vpenjalom vključno z ostalo drobno opremo vključno z dokumentacijo brez hladilnega sistema, saj je bil prej priključen na centralno enoto Delovne ure pribl. 71.000 h Ure vretena pribl. 25.900 h

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions Iedpfx Adjuhav Dekeap - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] Iedpfxeuhaw Us Adkjap - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: novo, Leto izdelave: 2026, Spindle speed continuously variable, electronically controlled: 40–4000 rpm Spindle mount: MT 2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth setting via digital depth display Digital speed display Iaedjby Swhopfx Adkjp Digital drilling depth display Drilling depth stop via stop ring Feed/operation: manual Table height adjustment via rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2: - Vice "Felix", jaw width 80 mm, max clamping width 120 mm - Quick-release drill chuck 1–13 mm, mount B16 - Taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN INDIVIDUAL QUOTATION!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 Iedpfx Ajuhaxfjdkeap - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i Isdpfouhawzex Adksap - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Iajdowp D Nbopfx Adkop Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: rabljeno, CNC dolgo stružni avtomat TRAUB TNL 12/7 Isdpfx Adoxbtz Uokoap