Center CNC za struženje in rezkanje

TRAUB TNX65/42

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Lathe TRAUB TNX 65/42 Year of Manufacture: 2009 Control System: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm Iodpfsyw H Szsx Ah Ujih - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed since 04/26 ACCESSORIES - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts ejector - Parts belt conveyor

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Splošno Krmiljenje: SIEMENS 840 D Glavno vreteno Premer palice: 60 mm Število vrtljajev: 6000 vrt/min Iiodpfx Ahozgcp Ss Ush Moč: 29 kW Navor: 140 Nm Sinhronsko vreteno Tehnologija: Nameščeno na revolver Vpenjanje: Kleščni vpenjalni sistem D=42 mm Največje število vrtljajev: 4.500 vrt/min Revolver 1 (X/Z) Tehnologija: Orodni revolver z 8 postajami Orodni nosilec: Za DIN 69880 - 25x48 mm Maksimalno število vrtljajev: 6.000 vrt/min Moč: 3,3 kW Maksimalni navor: 7,5 Nm X-os: 90 mm Z-os: 280 mm Revolver 2 (X/Z) Tehnologija: Orodni revolver s 6 postajami Orodni nosilec: Simetrično lastovičjerepasto vpenjanje Vrtljaji: 4.500 vrt/min Moč: 4,2 kW Navor: 7,5 Nm X-os: 81 mm Z-os: 80 mm Oprema Upravljanje odrezkov: Transportni trak s tečaji za odrezke Upravljanje hladilne tekočine: Črpalka za hladilno tekočino 8 bar Odvod obdelovancev: Naprava za prevzem obdelovancev Podajalnik palic: Magacin za palice LM 3200 Izmetnik: Na sinhronskem vretenu

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Obdelovalni center za struženje in frezanja GILDEMEISTER GMX 400, linearna izvedba z Y-osjo in frezalno vreteno. Letnik: 2003 Krmilni sistem: Sinumerik Power line Tehnični podatki: Moč pogona glavnega vretena ISM 90: 36/45 kW (100/40 %) Število vrtljajev glavnega vretena: Navor glavnega vretena: Premer obdelovanca: 90 mm Število mest v orodjarniku: 120 kosov Orodjarna glavnega vretena: HSK 63 Moč pogona protivretena ISM 90: 36/45 kW (100/40 %) Število vrtljajev protivretena: Navor protivretena: Premer obdelovanca: 90 mm B-os / frezalno vreteno: Moč pogona: Število vrtljajev: Navor: Orodjarna: HSK 63 Y-os: +/- 110 B-os: +/- 120° Spodnji revolver: X-os: Z-os: Število vrtljajev pogonjenih orodij: Število mest v revolverju: 12 kosov Iiodpjwzbq Tsfx Ah Ueh Orodjarna: VDI 40 Dodatna oprema: - Sistem za odvajanje žagovine - Sistem za visok tlak s 20 bar - Priprava za 3D merilno tipalo - Funkcija vodila protivretena - Avtomatska drsna vrata

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 Iedpfx Asuhav Doh Usih - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 132542, premer struženja nad prečnim suportom: 470 mm, stružna dolžina: 300 mm, premer struženja: 580 mm, izvrtina vretena: 62 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 380 mm, moč vretenovega motorja: 11.000 W, hitro pomikanje X-os: 25 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 1.839 mm, skupna dolžina: 1.865 mm, skupna širina: 1.734 mm, skupna masa: 3.200 kg, Oprema: dokumentacija / priročnik, OKUMA LB2000EX-MC x 300mm CNC krmilnik OSP P200L Število osi: 3 Obratni premer nad posteljo: 580 mm Ijdpoxrnr Nefx Ah Ueih Obratni premer nad prečnim suportom: 470 mm Največji premer struženja: 360 mm Največja dolžina struženja: 300 mm Pomik osi X: 260 mm Pomik osi Z: 390 mm Hitri pomik po osi X: 25.000 mm/min Hitri pomik po osi Z: 30.000 mm/min Vretenska glava: ravna Hitrost glavnega vretena: 6000 obr/min Moč glavnega vretena: 11 kW Premer glavnega vretena: 100 mm Kitagawa 6-palčna glava Pogonsko orodje: 6000 obr/min Moč pogonskega orodja: 5,5 kW Revolver, tip VDI, 12 postaj Kvadratni držalo orodja: 20 mm Držalo za izvrtalno palico: 32 mm Konjiček Premer pinole: 70 mm NC pomik konjička: 415 mm Konus: MK 4 Transportni trak za odrezke, visok Teža: 3200 kg Enostavni dialog z barvnim zaslonom Visokotlačno hlajenje

Stanje: potreben popravila (rabljeno), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 Iedpfx Ahowmwrds Ujih X axis: 500 mm Y axis: 350 mm Z axis: 610 mm Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 stations Weight: 3,200 kg Equipped with 4th axis Tool interface: SK 30 Approx. 40 tool holders included The machine has the following issues: - Heidenhain 430 controller is defective (not always possible to boot, crashes occur during machining operations)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2016, obratovalne ure: 90 h, Funkcionalnost: omejena funkcionalnost, vrsta goriva: dizel, moč: 44 kW (59,82 KM), nazivna moč: 44 kW (59,82 KM), neprekinjena moč: 44 kW (59,82 KM), neprekinjena (navidezna) moč: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Isdpexlngaefx Ah Ueih Condition: Used. The cooling pump is not working, oil is entering the engine, and the oil pump needs replacement. Otherwise, technically maintained. Can be started upon request. An additional new fuel pump is included. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and sound-insulated canopy. Suitable for backup power supply or continuous use in industrial or construction settings. Technical specifications: Model: ETT-55E Operating hours: 90 hrs Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4-cylinder, water-cooled) Generator (alternator): WHI224D, brushless, with Automatic Voltage Regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 Speed: 1500 rpm Cooling: Water-cooled Fuel consumption: ~10 L/hour (at 100% load) Fuel tank capacity: 260 L (up to 8 hours of continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control & Equipment: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator management Protection against overvoltage, overload, and low oil pressure Sound-insulated canopy – reduced noise level Manual or automatic operating mode Application: The generator is suitable for: - Industrial enterprises, warehouses, production facilities - Construction sites and mobile workplaces - Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution where a stable, uninterrupted power supply is required. If you have any further questions – please feel free to contact us.

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX8i-s, _____ Opis: Glavna vretena: Tehnologija: Vreteno z motorjem Število vrtljajev: 5.000 vrt/min Moč: 22,6 kW Navor: 180 Nm Premer vretena: 65 mm Iodpfszr Dd Usx Ah Ujih Naprava za vpenjanje obdelovanca: Vpenjalna glava, Hainbuch Spanntop Kombi Axfix, velikost 65 Proti-vreteno: Tehnologija: Vreteno z motorjem Število vrtljajev: 5.000 vrt/min Moč: 22,6 kW Navor: 180 Nm Naprava za vpenjanje obdelovanca: Vpenjalna glava, Hainbuch Spanntop Kombi Axfix, velikost 65 Izmetnik: Hidravlični, z možnostjo izpiranja Nosilec orodja I (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Nosilec orodja II (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Nosilec orodja III (X/Y/Z): Tehnologija: Revolver s 10 postajami Namestitev orodja: VDI30 Pogon orodja: 6.000 vrt/min, 5,5 kW, 17,5 Nm Pot giba v X/Y/Z: 175/80/650 mm Hitrost giba v X/Y/Z: 20/20/40 m/min Oprema/dodatna oprema: Upravljanje z odrezki: Transporter za odrezke Upravljanje s hladilom: IKZ sistem s filtrom iz papirnate traku in visokim tlakom, 80 bar Kontrola temperature hladila: Priprava za priključitev zunanjega hladilnega sistema, Deltatherm Dovod surovega materiala: Avtomatski podajalnik kratkih palic, FMB SL 80S Odstranjevanje končnih izdelkov: Portalni sistem za dvigovanje izdelkov (krmiljen z NC), s tekočim trakom Sesalnik za oljne hlape: Elektrostatični separator, LTA AC3001 Dodatna oprema: Različni rabljeni fiksni nosilci orodja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis, and B-axis, designed for complete machining of turning-milling components. Integrated spindle motors (ISM) on main and counter spindles with a liquid-cooled thermal compensation system. Drive output: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Counter spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Counter spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute cutting forces across two axes, resulting in extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. Swivel range of 210° is steplessly adjustable and can be interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control, includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through counter spindle * 12-position radial VDI 30 tool turret with directional logic for up to 12 live tool stations Swivel speed adjustable via feed switch Performance data: Max. 6.7 kW at 2650 rpm Constant torque: 25 Nm Speed range: 0–5000 rpm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming * Finished part catcher * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinge belt") * Coolant system integrated in chip conveyor Iedjxz Ab Ropfx Ah Ujih 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 rinse pumps with 3.7 bar * Electrical cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Turning window - Cleaning pistol - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Iiodpfx Ahsw E Nnbe Ujh Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.