Traub Tns 65 D nakup rabljenega (92)

Stanje: dober (rabljeno), Leto izdelave: 1994, TRAUB TNS 65 D / 5-osni CNC stružno-rezkalni center Lsdpfjyc Nnzjx Abberg - Krmiljenje TX8 D - Popolni tehnični podatki na slikah - Leto izdelave: 1994 - Podajalnik Hydrobar - Razni gnani držala za orodje - Držala za orodje - Trizverčnična glava - Popolna dokumentacija Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, Leto izdelave: 1990, Turning diameter 250 mm Turning length 450 mm Control system TX8D Spindle bore 80 mm Spindle speed: 3,150 rpm CNC bar turning machine with 3 turrets Extra-large spindle bore, with bar feeder Lrodpfst Hwq Dex Abbjg

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Ljdpexhbfnefx Abborg Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Parts ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic part gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, flushing gun

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Lrjdpfxex A Hdfs Abbog

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l Ledpfowpa Rusx Abberg NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s Lrjdsxpgl Ajpfx Abbjg X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Ledpfxow Uikto Abberg Delovne ure: 38.433 ur OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Transportni trak za odrezke Zračni filter

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice 65 mm maks. premer vrtenja 175 mm maks. dolžina palice 3.000 mm krmiljenje sistem TX 8F pomik – x 140 mm pomik – z 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena s podajalnikom palic. Ljdpfsxbtq Nex Abbsrg Stroj je v vzdrževanem stanju in si ga je mogoče kadarkoli ogledati pod priklopljenim tokom. Videoposnetke stroja na lokaciji vam na zahtevo z veseljem posredujemo. Tehnični podatki stroja sledijo v kratkem. Prosimo za vaše razumevanje! #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Ljdsv Scrhspfx Abberg

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Lredpfx Asv Scrbjbbog

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Ljdpfx Abeu Eug Ijbsrg Includes extensive accessories.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder Lredpfxowi Izhs Abbsg • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Lrjdpex Sw Icjfx Abbsg Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Lodpfxsu Ix N Se Abbsrg Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Lrodpfewp D Nbex Abbog Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: rabljeno, Leto izdelave: 2003, maks. premer palice 65 mm maks. dolžina palice 3.000 mm krmiljenje sistem TX 8H CNC stružnica | TRAUB - TNC 65 z vgrajenim podajalnikom palic. Stroj je v dobro vzdrževanem stanju in ga je mogoče kadar koli ogledati pod napetostjo. Videoposnetke stroja na lokaciji tovarne z veseljem posredujemo na zahtevo. Lrodpfx Aoxbtp Eobbjg Tehnični podatki stroja bodo sledili v kratkem. Zahvaljujemo se vam za razumevanje! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter Ljdpfxouhadzs Abberg - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Lrsdpfx Asq Npqmjbbeg Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Stanje: rabljeno, Leto izdelave: 1990, Zelo veliko nosilcev Vpenjalna glava z veliko silo 12-pozicijska revolverska glava Tip stroja: CNC stružnica Leto izdelave: 1990 Krmiljenje: Traub TX 8 F Premer struženja: 480 mm Dolžina struženja: 800 mm Premer vretena: 65 mm Hitrost vretena: 40 - 4000 min⁻¹ Teža: pribl. 5000 kg Dimenzije (Š x G x V): pribl. 2950 x 1990 x 2000 mm Ledpfoyc Hgbsx Abberg Stanje: rabljeno

Leto izdelave: 2001, Stanje: dober (rabljeno), Bar diameter min. 18mm / max. 63mm Lredpfxsi Dagce Abbsg Bar length min. 1000mm / max. 4200mm

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control system: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm / 2-step Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill travel: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH): approx. 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: Ø 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Precision adjustment device for tool setting Ledpfou Rqabsx Abbsrg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Multispindle & Bar Automatic Lathes TRAUB TD 26 Year: 1991 * Spindle motor power: 2.2 kW * Number of spindles: 4 * Spindle bore: 26 mm * Speeds: 1.18 – 4750 rpm * Total power: 3.2 kW * Length (L – R): 1800 mm * Width (F – B): 1000 mm * Height: 1400 mm * Weight: 800 kg Lrsdpfxewc Aqws Abbjg * Tool changer holder: 6 tools Additional Information * Max. round bar: 26 mm * Max. square bar: 18 mm * Max. hexagonal bar: 22 mm * Bar feeder included

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 110.000 h, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, Opis sledi Ljdpfox A Ha Hex Abbsrg

Stanje: dober (rabljeno), Leto izdelave: 1989, 1 x Automatic Lathe Manufacturer: Traub Model: TD 16 Year of manufacture: 1989 with hydraulic bar feeder LNS Hydrobar Lsdpfx Aevga A Tsbberg Model: 3.16-HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret head Quick-action material clamping Long turning device Central lubrication system by Vogel Accessories: See photos The machine can be inspected under power.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1989, V okviru stečajnega postopka ponujamo: 2 x CNC stružnica (1 x protivreteno (1 x spodnji revolver)), rabljena + podajalnik palic + dodatna oprema 1. CNC stružnica s protivretenom Proizvajalec: MIYANO Tip: BNC 34-S Leto izdelave: 1989 Krmiljenje: Fanuc 0-T - Podajalnik palic HYDROBAR - 2 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 2. CNC stružnica z 2 x revolverjem Lredex Ed A Depfx Abbsg Proizvajalec: MIYANO Tip: JNC 45-T Leto izdelave: 1989 Krmiljenje: Fanuc 0-T Podajalnik palic HYDROBAR - 1 x vpenjalna glava za napenjalne tule - 1 x trijelčna vpenjalna glava 3. Dodatna oprema - Približno 65 x napenjalna tule - Približno 40 x komplet čeljusti - Različni nosilci orodij + orodja - Dokumentacija Stroji niso testirani, vendar so bili uporabljeni do konca. Prodaja iz lokacije, nakladanje možno za doplačilo.