Traub Tns 65 D nakup rabljenega (94)

Stanje: dober (rabljeno), Leto izdelave: 1993, - TRAUB TX 8F control system Iodpfx Ahjldd Iqs Deih - Spindle bore: 42 mm - Main spindle speed: 40 – 4,000 rpm - 4 cutoff slides: stroke 60 mm - 8-position turret - High-pressure pump 25 bar - Rear end machining (2-spindle) - Bar feeder (3 m) - Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 60.764 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030637, Stroj je v dobrem, takoj za uporabo pripravljenem stanju in ga je trenutno možno ogledati pod napetostjo. Stroj mora razstaviti in odpeljati kupec. Stroj ima 2 revolverski glavi, vsaka s 12 orodnimi mesti, vsa orodna mesta so gnana. Iijdsw N Rziepfx Ah Djh Poleg tega ima sprednjo napravo s 5 orodnimi mesti, od katerih so 4 gnana. Zadnja naprava ima 5 orodnih mest, 4 so gnana. Vpenjalni sistem glavnega vretena je Hainbuch 32, za nasprotno vreteno pa Axfix znamke Hainbuch. Priložiti je mogoče različne osnovne nosilce.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 1 MAIN SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle drive power: 10.7 kW - Spindle speed: 6300 rpm - Max. bar diameter: 36 mm - Minimum C-axis resolution: 0.001° - Traverse paths X/Z: 370 x 250 mm LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Traverse paths X/Z: 50/100 mm - Traverse path Y: +/-20 mm - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW DRILLING UNIT - Number of driven positions: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Traverse paths X/Z: 370 x 270 mm OPPOSITE DRILLING UNIT - Number of tools: 5 - Number of driven tools: 4 - Driven tool speed: 6000 rpm - Driven tool power: 4.3 kW - Strokes X/Y: 73 x +/-50 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 33 kW WEIGHT AND DIMENSIONS - Required space: 3335 x 1222 mm - Machine height: 1680 mm - Machine weight: 4000 kg OPERATING HOURS - Power-on hours: 41,698 h - Operating hours: 11,346 h ACCESSORIES - Control: TRAUB TX 8i - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor Iedpfx Ahjuhadho Doih - Parts removal - Parts belt conveyor - Bar feeder: LNS HYDROBAR EXPRESS 332 (2005)

Stanje: zelo dobro (rabljeno), CNC machine Traub TNL 26 Ijdpfx Ahohlp Sds Doih Condition: used, well maintained Sale without any warranty

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 360mm/160mm, centre distance: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10 m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Isdjwmqx Depfx Ah Djih

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 364, model krmilnika: Traub TX8F, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC lathe with 7 axes, bar feeder & additional equipment! Iedpfxjw Ec Alj Ah Dsih TECHNICAL DETAILS Bar length: 3000 mm Number of axes: 7 Control unit: Traub TX8F MACHINE DETAILS Operating hours spindle 1: 50,318 h Operating hours spindle 2: 32,922 h EQUIPMENT Main spindle Sub spindle 2 turrets 2x C-axis 1x Y-axis Bar feeder: IEMCA CNC BOSS 542 Enclosure Coolant system Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 1991, max. bar diameter: 42 mm chuck diameter: 40 mm diameter over cross slide: 160 mm spindle speed range: 10–5,000 rpm turret with 12 stations (non-driven) swarf conveyor FMB turbo 3000 bar feeder Iedpfxsvy Uy Hs Ah Djih max. bar length: 3 m

Stanje: rabljeno, AVTOMATSKI ENOVRETENSKI STRUŽNIK TB-42 za največji premer 42 mm Iiedpfx Ajxcpi Roh Deh

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions Iodpfx Ahouhav De Deih - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: novo, 3 safety glass panes suitable for CNC lathe TRAUB TNA 300 TNA 400 TNA 500 Iiedpfow Edq Dex Ah Djh TNC 42 TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediate, subject to prior sale Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Leto izdelave: 1983, Stanje: pripravljen za uporabo (rabljen), Swing diameter: 320 mm, turning length: 1000 mm, spindle bore: 80 mm, spindle speed: 3150 rpm, travel X/Z: 265 mm / 1000 mm. Machine dimensions (L/W/H): approx. 5500 mm / 2400 mm / 2400 mm, weight: approx. 7000 kg, control system: Traub System TX-8. Includes a set of tools, 3-jaw chuck, and bar feeder with collets. Documentation available. On-site inspection possible. Iiedpfx Ahowzld De Dsh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Iedpfxowuddvj Ah Dsih Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, obratovalne ure: 49.274 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 247, stružna dolžina: 80 mm, največja hitrost vretena: 12.000 obr/min, dolžina podajanja os X: 35 mm, dolžina pomika po osi Y: 37 mm, dolžina podajanja os Z: 75 mm, Premer palice (maks.): 12 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Main spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Max. speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Turret I (X/Y) Technology: 6-station turret (all stations powered) Tool holder: Ø 25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control on-time: 96,171 h Machine on-time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT Iiedpfx Ahsvrz E Ho Deh - Chip management: Chip conveyor - Coolant management: Coolant pump - Raw material feeding: Bar loader, FMB minimag 3200 - Finished parts discharge: Finished part removal system (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various static and driven holders

Stanje: rabljeno, Leto izdelave: 1987, Control system: Traub TX 8D Swing diameter over cross slide: 660 mm Swing diameter over face slide: 445 mm Turning length: 1000 mm Spindle bore: 80 mm Spindle speed: 2,000 rpm Number of tool stations: 14 positions Chuck diameter: 250/315 mm Isdov Ig D Topfx Ah Doih Operating hours: approx. 39,794 h In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, displayed tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information are subject to change and error. Prior sale reserved!

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 Iedpfeuhaw Ujx Ah Deih - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5318, izvrtina vretena: 26 mm, največja hitrost vretena: 4.750 obr/min, TECHNICAL DETAILS Max round diameter: 26 mm Max square dimension: 18 mm Max hexagon dimension: 22 mm Spindle power: 2.2 kW Number of spindles: 4 Spindle bore: 26 mm Speeds: 1,180 - 4,750 rpm Tool holder: 6 slots MACHINE DETAILS Iijdpowtq Urofx Ah Djh Length L -- R: 1,800 mm Width F -- B: 1,000 mm Height: 1,400 mm Weight: 800 kg Total power: 3.2 kW Operating voltage: 380 V 50 Hz

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), A universal CNC lathe Traub is available. Swing diameter over bed/cross slide: 400mm/360mm, maximum/standard turning diameter: 360mm/320mm, maximum turning length: 1000mm, distance between centers: 2000mm, chuck diameter: 315mm. Spindle bearing diameter: 160mm, spindle bore: 80mm, speed: 4000rpm, power: 26kW, tool positions: 14. Travel X/Z: 180mm/1000mm, feed rate: 24mm/rev, rapid traverse X/Z: 1000mm/1500mm/min. Tailstock quill diameter: 100mm, quill stroke: 200mm. Machine dimensions X/Y/Z: approx. 5800mm/2400mm/2400mm, weight: approx. 7200kg, control: Traub System TX-8-D. Documentation available. Inspection on site is possible. Iiodpfowrrq Eox Ah Deh

Stanje: dober (rabljeno), Leto izdelave: 2000, Traub TNE 300 Year of manufacture: 2000 Control: TX 8 H Travel X/Z: 210 / 450 mm Turning length: 450 mm Turning diameter: 275 mm 8-position turret 3-jaw chuck Spindle speed up to 4,000 rpm Drive power: 11 kW Spindle bore: 65 mm Iiodpfxew Dp H Ie Ah Djh Chip conveyor Machine without the visible bar feeder

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 Ijdpeuhaxfsfx Ah Deih - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25//16455, največja hitrost vrtenja: 2.800 obr/min, vrtljajska hitrost (min.): 1.400 obr/min, stružna dolžina: 65 mm, TECHNICAL DETAILS Turning length: 65 mm Threading length: 40 mm Maximum part length: 65 mm Spindle speeds: 1,400–2,800 rpm Isdpfewtq Ulsx Ah Doih MACHINE DETAILS Total power requirement: 2.6 kW Machine weight: 0.7 t Space requirement: 1,200 x 700 x 1,600 mm Main voltage: 415 V

Leto izdelave: 1994, obratovalne ure: 38.274 h, Stanje: pripravljen za uporabo (rabljen), Spindle bore: 42 mm, turning diameter over cross slide/bed: 170/400 mm, spindle speed: 56–5600 rpm, control system: TX 8F. Equipped with four driven tools, various VDI30 tool holders, 15 bar high-pressure pump, and a measuring arm for tool measurement. Operating hours: 38,274 h. Baumüller drive BUH-4-55-6-002 is showing a fault message and requires servicing. On-site inspection is possible. Iedpfxoq A S Duo Ah Dsih

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW Iodpjuhawzefx Ah Dsih - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, stružna dolžina: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Max. workpiece length: 206 mm Ijdpfowtq Ufex Ah Dsih Spindle bore: 42 mm Tool post: 4 slots MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] Isdpfx Aeuhawhsh Deih - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 26,709 [h] COUNTER SPINDLE - Max. bar diameter: 13 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Spindle hours: 16,854 [h] - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] - Z stroke: 50 [mm] - Driven tool speed: 8,000 [rpm] LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 [mm] * Y travel: -9.5 / +28 [mm] - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 16 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,850 x 1,100 [mm] - Machine height: 1,480 [mm] - Machine weight: 2,000 [kg] EQUIPMENT - Control: Traub TX 8i - Driven guide bushing - Parts removal device - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 [l] * with paper filter - Bar loader: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 Iodpfouhawusx Ah Dsih - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 SUB MACHINING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar loader - Tool presetting device