Traub Tna480 Tx8D nakup rabljenega (111)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 19.295 h, moč vretenovega motorja: 10.700 W, največja hitrost vretena: 8.000 obr/min, skupna masa: 6.000 kg, skupna širina: 2.500 mm, skupna višina: 2.600 mm, Premer palice (maks.): 32 mm, potovalna razdalja osi X: 140 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8i-p, največja dolžina izdelka: 4.500 mm, število osi: 7, Ta 7-osna stružnica TRAUB TNL 32 P je bila izdelana leta 2012. Ima največji premer palice 32 mm in največji pomik Z-osi 305 mm. Stroj je opremljen z dvema revolverjema z gnanimi orodji, ki ponujata po 10 oz. 9 orodnih postaj. Če iščete visokokakovostne zmogljivosti za struženje, razmislite o naši ponudbi dolge stružnice TRAUB TNL 32 P. Za več informacij nas kontaktirajte. • Število revolverskih glav: 2 • Največji pomik Z-osi: 305 mm • Navor glavnega vretena: 21/32 Nm • Resolucija C-osi glavnega vretena: 0,001° • Orodne postaje revolver 1: 10 • Postaje za gnana orodja revolver 1: 10 • Hitrost gnanih orodij v revolverju 1: 12.000 obr/min • Moč gnanih orodij revolver 1: 1,5 / 2,5 kW • Premer držala orodja revolver 1: 45 mm • Nosilec rezalnega orodja revolver 1: 16 x 16 mm • Revolver 1 pomik X-osi: 140 mm • Revolver 1 pomik Z-osi: 305 mm • Revolver 1 ločljivost H-osi: 0,001° • Revolver 1 čas med menjavo orodja: 0,3 s • Revolver 2 orodne postaje: 9 • Revolver 2: 9 postaj za gnana orodja • Revolver 2 hitrost gnanih orodij: 12.000 obr/min • Revolver 2 moč gnanega orodja: 1,5 / 2,5 kW • Revolver 2 premer držala orodja: 45 mm • Revolver 2 nosilec rezalnega orodja: 16 x 16 mm • Revolver 2 pomik X-osi: 140 mm • Revolver 2 pomik Y-osi: -25 / +40 mm • Revolver 2 pomik Z-osi: 320 mm • Revolver 2 čas med menjavo orodja: 0,3 s • Hitrost protivretena: 8.000 obr/min • Moč protivretena: 1,5 / 2,5 kW • Navor protivretena: 4,5 / 7,7 Nm • Resolucija C-osi protivretena: 0,001° • Največja dolžina vpenjanja: 250 mm • Največji premer palice (protivreteno): 32 mm • Orodne postaje za zadnjo obdelavo: 8 • Postaje za gnana orodja za zadnjo obdelavo: 3 • Hitrost gnanih orodij za zadnjo obdelavo: 12.000 obr/min • Moč gnanega orodja za zadnjo obdelavo: 1,5 / 2,5 kW • Premer držala orodja za zadnjo obdelavo: 36 mm • Hitri pomik (X / Y / Z): 20 / 20 / 20 m/min • Največja hitrost podajanja: 20.000 mm/min • Skupna priključna moč: 46 kW Knedjzcyhxjpfx Ahcob • Potrebna površina z vključenim podajalcem palic: 8.000 x 2.500 x 2.600 mm • Transporter za odrezke: opcijsko, ni vključen • Sistem hlajenja: da • Orodni revolver: 2 • Enota za zadnjo obdelavo: da • Vmesnik za podajalec palic: da • Podajalec palic: LNS Hydrobar Express 332 S2 / 3 m • Elektronsko ročno kolo: da • Hidravlična enota: da Poškodbe stroja: Proti vreteno je trenutno neuporabno zaradi daljšega neuporabe. Okvarjen je ali senzor, ali motor. Tehnične specifikacije: Proti vreteno: Da Gnana orodja: Da Hlajenje skozi vreteno: Da

Stanje: rabljeno, CNC Lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture: 1996 CNC Control: TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor output: 22 kW Total power requirement: 35 kW Electrical connection: 380 Volt, 50 Hz Kodpfezacwdex Ahcjnb - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - Including 8 VDI 40 tool holders - 3-jaw power chuck Ø 225 mm SMW Autoblok, type KNCS-N-Ø 225-65 Including a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, type ZHDAS-130-67 - Chip conveyor KNOLL, type 200 S-1/600 - Coolant system - Hydraulic unit freestanding (L x W x H: 650 x 500 x 1000 mm) Space requirement (L x W x H): 4800 x 2000 x 2100 mm Space requirement main machine (L x W x H): 3500 x 2000 x 2100 mm Space requirement chip conveyor (L x W x H): 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Machine ready for demonstration. Hollow clamping cylinder for workpiece clamping needs to be repaired.

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 2 GLAVNO VRETENO - Največji premer palice: 18 [mm] - Hitrost vrtenja vretena: 12.000 [rpm] - Moč pogona vretena: 3,0 / 5,5 [kW] - Najmanjša ločljivost osi C: 0,001 [stopinje] - Gib osi Z: 205 [mm] PROTIVRETENO - Največji premer palice: 20 [mm] - Hitrost vrtenja vretena: 12.000 [rpm] - Moč pogona vretena: 1,5 / 2,5 [kW] - Najmanjša ločljivost osi C: 0,001 [stopinje] - Število rotacijskih glav: 2 ZGORNJA ROTACIJSKA GLAVA - Število položajev: 8 - Število motoriziranih položajev: 8 - Hitrost pogonjenih orodij: 12.000 [rpm] - Moč pogonjenih orodij: 1 / 2 [kW] - Gib osi X/Z: 165 / 550 [mm] - Gib osi Y: -40 / +25 [mm] - Hitrost hitrega premika (X/Y/Z): 21 / 21 / 42 [m/min] - Gib osi B: 100 [stopinje] SPODNJA ROTACIJSKA GLAVA - Število položajev: 7 - Število motoriziranih položajev: 7 - Hitrost pogonjenih orodij: 12.000 [rpm] - Moč pogonjenih orodij: 1,5 / 2,5 [kW] - Gib osi X/Z: 120 / 250 [mm] - Gib osi Y: -20 / +40 [mm] - Hitrost hitrega premika (X/Y/Z): 21 / 21 / 50 [mm/min] OBDELAVA PROTIVREMENA - Število položajev: 7 - Število motoriziranih položajev: 3 - Hitrost pogonjenih orodij: 10.000 [rpm] - Moč pogonjenih orodij: 1 / 2 [kW] ELEKTRIČNO NAPAJANJE - Napetost napajanja: 400 [V] - Skupna moč: 24 [kVA] TEŽA IN DIMENZIJE - Prostorska zahteva: 3.060 x 1.480 [mm] - Višina stroja: 2.420 [mm] - Teža stroja: 4300 [kg] DELOVNE URE STROJA - Delovne ure vretena: 30765 [ur] PRIPOMOČKI - Krmilnik: Traub TX 8i-s - Pogonska vodilna puša - Odstranjevanje delcev - Transportni trak za dele - Rezervoar za hladilno tekočino * z visokotlačno črpalko: 40 [bar] * s papirnatim filtrom Knjdpfx Aszlk Aqohcsb - Shramba palic: LNS EXPRESS 220 - Sistem za odsesavanje oljne meglice: DONALDSON TORIT DCE - Sistem za gašenje požara * * Opomba: Delovanje ni zagotovljeno. Naj ga preveri usposobljeno podjetje kupca.

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 2 GLAVNO VRETENO - Največji premer palice: 18 [mm] - Hitrost vretena: 12.000 [RPM] - Moč pogona vretena: 3,0 / 5,5 [kW] - Najmanjša ločljivost osi C: 0,001 [stopinje] - Gib osi Z: 205 [mm] NASPROTNO VRETENO - Največji premer palice: 20 [mm] - Hitrost vretena: 12.000 [RPM] - Moč pogona vretena: 1,5 / 2,5 [kW] - Najmanjša ločljivost osi C: 0,001 [stopinje] - Število rotacijskih glav: 2 ZGORNJA ROTACIJSKA GLAVA - Število položajev: 8 - Število motornih položajev: 8 - Hitrost pogonjenih orodij: 12.000 [RPM] - Moč pogonjenih orodij: 1 / 2 [kW] - Gib osi X/Z: 165 / 550 [mm] - Gib osi Y: -40 / +25 [mm] - Hitrost hitrega gibanja (X/Y/Z): 21 / 21 / 42 [m/min] - Gib osi B: 100 [stopinje] SPODNJA ROTACIJSKA GLAVA - Število položajev: 7 - Število motornih položajev: 7 - Hitrost pogonjenih orodij: 12.000 [RPM] - Moč pogonjenih orodij: 1,5 / 2,5 [kW] - Gib osi X/Z: 120 / 250 [mm] - Gib osi Y: -20 / +40 [mm] - Hitrost hitrega gibanja (X/Y/Z): 21 / 21 / 50 [mm/min] OBDELAVA NA DVEH STRANEH - Število položajev: 7 - Število motornih položajev: 3 - Hitrost pogonjenih orodij: 10.000 [RPM] - Moč pogonjenih orodij: 1 / 2 [kW] ELEKTRIČNO NAPAJANJE - Napetost napajanja: 400 [V] - Skupna moč: 24 [kVA] TEŽA IN DIMENZIJE - Potreben prostor: 3.060 x 1.480 [mm] - Višina stroja: 2.420 [mm] - Teža stroja: 4300 [kg] DELOVNI ČAS STROJA - Delovni čas vretena: 41026 [ur] Kedpfx Ahezlk Awjcsnb OPREMA - Upravljanje: Traub TX 8i-s - Pogonjena vodilna puša - Sistem za odvajanje delov - Tračni transporter za dele - Odstranjevalec струžkov - Rezervoar za hladilno tekočino * z visokotlačno črpalko: 40 [bar] * z papirnatim filtrom - Magazin za palice: LNS EXPRESS 220 - Sistem za odvajanje oljnih meglic: DONALDSON TORIT DCE - Sistem za gašenje požara * * Opomba: Delovanje ni zagotovljeno. Naj ga preveri usposobljeno podjetje kupca.

Leto izdelave: 2003, stanje: rabljeno, Nominalni tok: 60 A, nadzorna napetost: 24 V, priključna moč: 33 kW, dolžina: 2290 mm, širina: 1350 mm, višina: 1630 mm, teža: 4,65 t, delovni čas: 78.439 ur, vključno z dokumentacijo, sistemom za odvajanje opilkov in avtomatskim podajalnikom. Možen je ogled na licu mesta. Ksdszuzz Aspfx Ahconb

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.0 / 5.5 kW - Minimum C-axis resolution: 0.001° - Z-axis travel: 205 mm SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 1.5 / 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 rpm - Driven tool power: 1 / 2 kW - Travel X/Z: 165 / 550 mm - Travel Y: -40 / +25 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 42 m/min - B-axis stroke: 100° LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 rpm - Driven tool power: 1.5 / 2.5 kW - Travel X/Z: 120 / 250 mm - Travel Y: -20 / +40 mm - Rapid traverse rate (X/Y/Z): 21 / 21 / 50 mm/min SUBSEQUENT MACHINING - Number of positions: 7 Kjdjzbvnlepfx Ahcjnb - Number of driven positions: 3 - Driven tool speed: 10,000 rpm - Driven tool power: 1 / 2 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 24 kVA WEIGHT AND DIMENSIONS - Floor space required: 3,060 x 1,480 mm - Machine height: 2,420 mm - Machine weight: 4,300 kg MACHINE HOURS - Operating hours: 14,998 h - Spindle hours: 11,177 h ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA ELITE 220 / 32 XL - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. Must be inspected by a qualified company on behalf of the buyer.

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Knjdjzlk A Depfx Ahcob

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Driven tool speed: 12,000 [rpm] - Driven tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total power: 28 [kW] Kodpfx Ahoypxqrjcenb WEIGHT AND DIMENSIONS - Required floor space: 3870 x 1670 [mm] - Machine height: 2500 [mm] - Machine weight: 6000 [kg] OPERATING HOURS - Power-on hours: 23240 [h] - Operating hours: 19500 [h] ACCESSORIES - Control system: Traub TX 8i-p - 3-colour status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Workpiece removal - Parts conveyor belt - Bar feeder preparation

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC-vretenski stroj Traub z nasprotno vretensko osjo, ki je bil leta 2018 generalno popravljen v tovarni, skupaj z nosilcem palic. Premer glavne vretenske osi: 36 mm, hitrost: 6300 vrt/min, premer nasprotne vretenske osi: 32 mm, hitrost: 6300 vrt/min, hod osi Z4: 250 mm, hitri hod osi Z4: 30 m/min, največja dolžina obdelovanca: 200 mm, največji premer obdelovanca: 32 mm, nadzor: Traub/Index TX8i, delovnih ur: približno 147.000 ur. Nosilec orodja na vrhu: hod osi X2: 50 mm, hod osi Y2: +/-20 mm, hod osi Z2: 100 mm, hitri hod osi X2/Y2/Z2: 15 m/min, število mest za orodje: 12, hitrost: 6000 vrt/min. Nosilec orodja na sprednji strani: število mest za orodje: 5, hod osi X3: 370 mm, hod osi Z3: 250 mm, hitri hod osi X3/Z3: 30 m/min, največji premer orodja: 40 mm, hitrost: 6000 vrt/min. Nosilec orodja na zadnji strani: hod osi X4: 73 mm, hod osi Y4: +/-150 mm, število mest za orodje: 5, hitri hod osi X4/Y4: 15 m/min, premer orodja: 40 mm, hitrost: 6000 vrt/min. Vključno s kompaktnim filtrom Resy, trakom za transport materiala Knoll 240S-1/100, nastavljivim opornikom za obdelovanec, pripravo za namestitev revije za palice, sistemom za nadzor trkov Brankamp CSM 100 in revijo za palice FMB Turbo 5-42 X, leto izdelave: 2002. Dokumentacija je na voljo. Možen je ogled na kraju samem. Knjdpfx Ahjzkld Heceb

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, 1 x avtomatski vrtalni stroj Proizvajalec: Traub Model: TD 26 Letnik: 1986 + polnilni magazin Proizvajalec: Iemca Model: AS 325/32 Letnik: 1986 Oprema: 6-mestni zvezdasti revolver Centralno mazanje Odstranjevalec ostankov Dodatna oprema: kompletni nadomestni zobniki za orodje, ki se uporablja za obdelavo posameznih kosov Popolna dokumentacija za stroj in polnilni magazin Stroj si lahko ogledate v delovanju ali pa vam lahko pošljemo videoposnetek. Kjdpfozq Dm Tsx Ahcsnb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret Kodsx D Drcopfx Ahcenb • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: pripravljen za uporabo (rabljen), Traub 700 734 VEMEM/I vmesna plošča, rabljena, v dobrem stanju, 100% delujoča, dobava skladno s fotografijami. Kodpfoz Ada Djx Ahcenb

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Traub. Število vreten: 2, višina vretena nad tlemi: 1130 mm, maks. premer struženja: 36 mm, maks. premer palice: 36 mm, maks. dolžina struženja: 100 mm, maks. hitrost glavnega vretena: 6300 obr./min, maks. hitrost kontrasnega vretena: 6300 obr./min, moč glavnega vretena: ca. 10,7 kW, moč kontrasnega vretena: ca. 10,7 kW, delovno območje pogona: glavno vreteno pomik X/Z: 370 mm/250 mm, kontrasno vreteno pomik X/Z: 370 mm/250 mm, revolver za orodja: 12 mest, pomik revolverja X/Z: 50 mm/100 mm, Y-os revolverja: +/-20 mm, maks. hitrost gnanih orodij: 6000 obr./min, sprednja mesta za orodja: 5, zadnja mesta za orodja: 5, krmilje: Traub TX 8i. Teža: ca. 4000 kg, dimenzije stroja X/Y/Z: ca. 3400 mm/1300 mm/1700 mm. Dokumentacija na voljo. Ogled možen po dogovoru. Knsdjzidirspfx Ahcob

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Na voljo je razmeroma malo uporabljan CNC univerzalni stružni stroj Traub. Premer vretena: 82 mm, maks. premer vpenjalne glave: 315 mm, dolžina struženja: 750 mm, pomik X/Z: 360 mm/750 mm, pomik Z: +/-60 mm, hitri pomik: 20 m/min. Dimenzije stroja X/Y/Z: pribl. 3250 mm/1900 mm/2300 mm, teža: pribl. 7800 kg, obratovalne ure: pribl. 21812 h. Dokumentacija je na voljo. Ogled na lokaciji je možen. Slika je simbolična. Kodpfx Ahozhnrnocsnb

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Knjdpsw E Nnbefx Ahcsb Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Kodpex Hxv Djfx Ahconb Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle Knsdpjuhav Djfx Ahcob - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC Turning Automation TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit), 10.4" flat display Additional V24 RS232 port in control cabinet MDE interface in control cabinet (machine running, piece counter) Tool monitoring for threading without compensating chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch quick-change base body with installation aid Hainbuch manual quick-change device Sub-spindle: Sub-spindle as motorized spindle with C-axis System for sub-spindle clamping pressure, part ejector, Axfix chuck Hainbuch Top tool turret with driven tools, electronic gearbox Knedpfx Ahjzaud Ajcjb X3 cross slide for front attachment, 5-position front attachment Driven tools Face-side cut-off machining station with driven tools Workpiece removal unit: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Cooling/lubrication system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining station Vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Rinsing gun Hinged belt chip conveyor, discharge height 950 mm Preparation for mounting bar loader (guide tube D25, D36) Steady rest stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub-spindle Machine with no known defects,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 55.000 h, največja hitrost vretena: 8.000 obr/min, skupna masa: 7.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i-s, število osi: 7, This 7-axis TRAUB TNL 32-7 horizontal lathe was manufactured in 2013. It is ideal for precision turning operations and offers robust performance and reliability. Take advantage of the opportunity to purchase this TRAUB TNL 32-7 horizontal lathe. Contact us for more information. Additional Equipment • Coolant pump 3 bar / Coolant pump 8 bar • Chip conveyor, hinge belt type H = 1000 mm • Length measuring system X-axis for upper/lower turret • Fabric filtration for coolant: filtration grade approx. 30–40 µm • High-pressure coolant pump 20 bar • CO2 fire extinguishing system Kraft & Bauer Machine Advantages Kodoyrd H Djpfx Ahcsnb Technical machine advantages • Maximum bar diameter: 32 mm • Spindle stroke: 305 mm • Automatic bar feeder: fmb lsk38-3200, max. bar length 3200 mm • Upper turret: x/y/z/h-axis, 10 tools, double drive • Lower turret: x/y/z/h-axis, 9 tools, same drive; counter spindle with independent drive • Conveyor belt for finished parts with gripper • Machine operated exclusively with cutting oil

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Tool monitoring, thread cutting without compensation chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch interchangeable parts, installation aid for base body, manual Hainbuch change device, sub-spindle: sub-spindle as motor spindle, C-axis, device for counter pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-slide for front unit, front unit 5-station and parting-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece removal device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel), rinse gun, connected load: 33kW, control: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in control cabinet, operating hours: 124,705h, with bar loader FMB TURBO 5-42XT/3200/C, chip conveyor, coolant system, and basic set of stationary and driven tool holders. On-site inspection possible. Kjdpfsy U Nq Iex Ahcenb

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: Knodpfx Aou Ix N Sshcob various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, Leto izdelave: 2008, Premer struženja 12,7 mm Dolžina struženja 50 mm Krmiljenje Traub System TX 8i Kedpfsygm R Iox Ahcsnb Število vrtljajev 12.000 vrt/min C-os 0,001° Postaja za prijem 12,7 mm Število vrtljajev 12.000 vrt/min Hitri pomik 15 m/min Revolver glava (x-krat) 6 Sistemi orodij 5+3 Sistemi orodij 3 orodja sistemi Skupna priključna moč 2,5/4 kW Teža stroja pribl. 2 t Potreben prostor pribl. 2,4 x 1,1 x 1,7 m CNC kratkostrugalni stroj Traub TNL 12K z avtomatskim podajalcem LNS Tryton 112 Pogon S8 (hrbtna obdelava z gnanimi orodji) prisoten Pogon S7 (sprednja obdelava z gnanimi orodji) prisoten

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1994, obratovalne ure: 8.000 h, Funkcionalnost: nepreverjeno, Machine in good condition Knjdpsv Im Sdofx Ahcob

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Includes extensive accessories. Kjdpfxeu Eug Ie Ahcsnb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 8.300 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.400 obr/min, Premer palice (maks.): 32 mm, model krmilnika: TX 8 i-p, dolžina obdelovanca (maks.): 245 mm, DÉTAILS TECHNIQUES Broche principale Passage maximum de barre : 32 mm Longueur maximale de pièce (usinage longitudinal) : 245 mm Longueur maximale de pièce (usinage court) : 125 mm Vitesse maximale de broche : 6.400 tr/min Contre-broche Passage maximum de barre : 32 mm Profondeur de serrage max. de la pièce : 250 mm Knodoyn Imyopfx Ahceb Vitesse maximale de broche : 6.000 tr/min Tourelle supérieure Nombre de stations : 10 Toutes motorisées Vitesse maximale : 12.000 tr/min Tourelle inférieure Nombre de stations : 9 Toutes motorisées Vitesse maximale : 12.000 tr/min Unité arrière Nombre de stations : 8 Stations motorisées : 3 (T12, T13 et T14) Vitesse T12 & T14 : 12.000 tr/min Vitesse T13 : 4.000 tr/min DÉTAILS DE LA MACHINE Heures broche : 8.300 heures Commande : TX 8 i-p ÉQUIPEMENT Convoyeur de pièces Convoyeur de copeaux Pompe arrosage 20 bars Filtre à brouillard d'huile IFS Chargeur de barres FMB turbo 3-36