Center CNC za struženje in rezkanje
TRAUB TNX65

Name: TRAUB TNX65
Brand: TRAUB
Availability: InStock

Leto izdelave

2005

Stanje

Rabljeno

Lokacija

Nürnberg

Center CNC za struženje in rezkanje TRAUB TNX65

Prikaži karto

Podatki o stroju

Opis stroja:: Center CNC za struženje in rezkanje

Proizvajalec:: TRAUB

Model:: TNX65

Leto izdelave:: 2005

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Nürnberg

Klic

Podrobnosti ponudbe

ID ponudbe:: A19688801

Št. reference:: 1006-18128

Nazadnje posodobljeno:: dne 28.10.2025

Opis

Swing diameter: 275 mm
Turning length: 900 mm
Control: TRAUB TX8i
Spindle bore: 65 mm
Drive power 100% duty cycle: 25.20 kW
Drive power 40% duty cycle: 30.20 kW
Torque at 40% / 100% duty cycle: 180 / 135 Nm
Spindle speeds - stepless: 1 - 5,000 rpm
Spindle diameter at front bearing: 110 mm
C-axis: 1 - 500 rpm
Tool carrier No. 1
X-axis: 290 mm
Y-axis: 165 mm
Z-axis: 600/950 mm
B-axis: 360°
Rapid traverse X/Y/Z: 18 / 18 / 30 m/min
Feed force X/Y/Z: 10 / 10 / 7 kN
Codpfx Afew E Nnboqsaa
Number of tools: 2x2 + 2x2
Number of driven tools: 2x2 + 2x2 mm
Tool speeds: 8,000 / 2,000 rpm
Drive power 25% duty cycle: 5.80 kW
Torque at 25% duty cycle: 4x18.6 / 4x74 Nm
Tool holder: TRAUB Ø60
Tool carrier No.2 / No.3 / No.4
X-axis: 170 mm
Z-axis: 600/950 mm
Y-axis: +/- 60 mm
Rapid traverse X/Y/Z: 18 / 15 / 30 m/min
Feed force X/Y/Z: 10 / 10 / 7 kN
Tool turret - number of stations: 10
Number of driven tools: 10 mm
Tool speeds: 1 - 6,000 rpm
Drive power 25% duty cycle: 5.80 kW
Torque at 25% duty cycle: 18.60 Nm
Tool holder: DIN 69880 Ø40x63
Bar loading magazine: DNH61 / 3000
Bar lengths: 1,000 - 3,200 mm
Bar diameter: 18 - 63 mm
Hexagon max.: 45 mm
Total connected load: 95.00 kW
Machine weight approx.: 16.00 t
Space requirement approx.: 10.00 x 3.50 x H3.00 m
With TRAUB TX8i control, main and counter spindle with C-axis,
3 pcs. turret tool carriers,
1 pc. vertical tool carrier with B-axis,
extraction system, chip conveyor, coolant unit with coalescence separator.
Bar loader: TRAUB Stamag DNH61 / 3000
2 pcs. 3-jaw chucks SMW KNCS-N 170-43
2 pcs. HAINBUCH Spanntop chucks
40 pcs. various static tool holders
6 pcs. various driven tool holders
Spare parts package
Machine can be inspected under power.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2008

126 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 89 44... oglasi

+49 89 31... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

CNC stružni in rezkalni center TRAUB TNX 65/42 DGY

Bremen

892 km

CNC stružni in rezkalni center
TRAUBTNX 65/42 DGY

49.000 €

EXW Začetna cena brez DDV

Klic

mali oglas

Zobna rezkalna naprava / 5 osi Datron D 5

Nemčija

697 km

Zobna rezkalna naprava / 5 osi
DatronD 5

Klic

Leto izdelave: 2012, Stanje: dober (rabljeno), Machine has 5,600 total spindle hours Datron D 5 Dental - Milling Machine, Year of manufacture: 2012, 5-axis simultaneous machining, Caedpfewvqh Dsx Afqoa Control: PC - Beckhoff, Automation / 8 blanks, Milling spindle: 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C 25, 15-position automatic tool changer, Rotary/swivel axis, A-axis: +/- 25°, B-axis: +/- 45°,

Poglej podrobnosti

mali oglas

Nemčija

5.343 km

Center CNC za struženje in rezkanje
TRAUBTNX 65

Klic

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Casdpewp D Nbjfx Afqea Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Poglej podrobnosti

mali oglas

Contamine-sur-Arve

667 km

CNC avtomatska stružnica
TRAUBTNX 65

Klic

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 Caedpfx Afjuhadzsqea - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Poglej podrobnosti

mali oglas

Zwevegem

1.001 km

Gramofon
BarssoDraaitafel

Klic

mali oglas

CNC center za struženje in rezkanje Traub TNX65

Winterbach

510 km

CNC center za struženje in rezkanje
TraubTNX65

Klic

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 51.400 h, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, New hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Short bar loader Breuning Approx. 114,586 operating hours Approx. 51,400 production hours Csdpfx Aswxc Hkefqsaa Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Poglej podrobnosti

mali oglas

Auw bei Prüm

790 km

CNC center za struženje in rezkanje
TraubTNX65

79.000 €

Začetna cena brez DDV

Klic

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 37.000 h, Funkcionalnost: popolnoma funkcionalen, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000 h Codpfxjwm Igfs Afqeaa Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational - Geometric accuracy within manufacturer’s tolerances Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle mount: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle mount: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Poglej podrobnosti

mali oglas

Vibracijski stroj za dodelavo GERD WOLFF VKUE 200

Ennepetal

802 km

Vibracijski stroj za dodelavo
GERD WOLFFVKUE 200

Klic

Leto izdelave: 2023, Stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator Caodpfen Smbrsx Afqea The VKUE series machines are suitable for surface processing of metallic and non-metallic workpieces. These machines feature a large screening area, enabling easy separation of workpieces from the abrasive media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing tube (various types available) The images are for reference only. Optional accessories are available at an additional cost.

Poglej podrobnosti

mali oglas

Oak Forest

7.638 km

CNC stružnica
TraubTNX 65/42

Klic

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet Casdpjq Npqmjfx Afqsa 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Poglej podrobnosti

mali oglas

Dettingen an der Iller

430 km

Obdelovalni center
HermleC 800 V

28.000 €

Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Casdpsiva Dkefx Afqja Heidenhain TS32 touch probe (as new)

Poglej podrobnosti

Oglašujte tukaj