Center CNC za struženje in rezkanje

TRAUB TNL 12K

Stanje: rabljeno, CNC stroj za obdelavo dolgih gred TRAUB TNL 12K. Nlsdpjzlk A Defx Alisd

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Nsdpsv Scrhjfx Aliold

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 Njdjuhawzepfx Alield - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm Nodpfx Aleuhawusijld - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 SUB MACHINING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Bushings: 4 - Set of sleeves and collets for bar loader - Tool presetting device

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 8.000 obr/min, število osi: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control unit with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle offers a 32-mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It includes an upper tool turret with double drive and a lower turret with nine tool holders. Consider the opportunity to purchase this TRAUB TNL 32 Swiss-type lathe. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; TFT color flat screen; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), thread cutting without compensating chuck, part-off tool breakage monitoring, part-off tool ejection monitoring, axis disabling, T-ATC • Main spindle: motor spindle with hollow clamping system; 32 mm bar/drill capacity; C-axis max. speed 8,000 rpm Nsdpfx Alex D Drcsijld • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; double drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter spindle operation • Measurement/feedback: glass scales on X axes (upper and lower turret); encoder on C axis • Backworking: 8-position rear station with combined drive for up to 3 tools; ready for internal coolant feed • Clamping: clamping direction reversal device and counter clamping pressure unit on main and counter spindle • Coolant system: standard unit with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), flow rate 19 l/min • Extraction: D 150 mm connection for central extraction system Additional equipment • None specified (no robots, bar feeders, chip conveyors, or external automation listed)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Nlodpfx Alex Hxv Djied Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list. Nsdpfxjvldx Ae Alijld

Stanje: novo, Leto izdelave: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1750 rpm Table area 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Njdpfetv Riaox Alijld Universal precision drilling and milling machine for horizontal and vertical milling operations with digital 3-axis position display DPA 31 Plus Description: - Heavy-duty, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precision-machined surface with T-slots and adjustable gibs - Milling head tiltable ±45° - Clockwise/anticlockwise rotation - X-axis traverse optionally via handwheel or table feed unit - Automatic end-stop on the X-axis - Height-adjustable safety shield with microswitch to protect user from flying chips and parts for maximum safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Mounting arbor for drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, for side and slab cutters Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal use - T-slot nuts - Drift - Operating tools

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopTurn, Opis: Glavno vreteno: Nsdexybxxepfx Aliold Tehnologija: Jermensko vreteno Število obratov: 6.000 min⁻¹ Moč (max.): 18,5 kW Premer prehoda: 52 mm Vpenjanje obdelovanca: 3-čeljustna glava, Samchully MH-206 V1 Nosilec orodja: Tehnologija: Revolverska glava z 12 postajami Vpenjanje orodja: BMT55 Pogonsko orodje: 5.000 min⁻¹ Oprema/dodatki: Upravljanje odrezkov: Transporter odrezkov Upravljanje hladilne tekočine: IKZ črpalka z oljnim skimmerjem in visokim tlakom, 10 bar Merjenje orodja: Avtomatska merilna roka Avtomatizacija: pripravljeno Odvod končnih kosov: Lovilec kosov s škatlo za zbiranje Nastavitveni način: Elektronsko ročno kolo

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit Nlsdsuhav Dopfx Aliod - Chip conveyor - Various fixed and driven tool holders