Stroj za vrtanje in rezkanje

Fehlmann Picomax 54

Stanje: zelo dobro (rabljeno), Krmiljenje: Heidenhain TNC 124 Pomiki X/Y/Z: 500/250/160 mm Pomik W: 480 mm Vpenjalna površina (D x Š): 885 x 320 mm Dovoljena obremenitev mize: 250 kg Razdalja miza – nos vretena: 0 – 605 mm Hitrost podajanja X/Y: 1 – 2000 mm/min Hnjdeyvrfdjpfx Aagok Hitrost podajanja Z: 1 – 1200 mm/min Sistem za hitro menjavo orodij: SF 32 Neskončno nastavljivo število obratov: 9200 obr/min Pogonska moč: 5 kW Potrebni prostor (Š x G x V): 1850 x 2550 x 2400 mm

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler Hedpehigmbjfx Aagjnk ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, High-Precision Drilling and Milling Machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Technical Data: Hodpfx Aoukf Ncjagonk >> Year of manufacture: 2001 >> Travel X/Y/Z: 500 / 250 / 160 mm >> Travel W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table - spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Stepless speed range: 9200 rpm >> Drive power: 5 kW >> Space requirement (W x D x H): 1850 x 2550 x 2400 mm About the machine: Offered here is a high-precision drilling and milling machine Fehlmann Model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. The program setup is particularly simple thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-friendly contouring controls that allow you to program conventional milling and drilling operations directly on the machine using the easy-to-understand plain text dialog. The machine runs very smoothly even at maximum spindle speeds. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, High-precision drilling and milling machine Fehlmann model Picomax 54, Heidenhain TNC 310 Very good condition Technical Data: >> Year of manufacture: 2000, Machine No. 14000258 >> Travel X/Y/Z: 500 / 250 / 160 mm >> Travel W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table – spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system: SF 32 >> Infinitely variable speed range: 9200 rpm >> Drive power: 5 kW >> Space requirements (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe 't>> Operating manual, electrical diagrams, machine books Hnodpfx Aaeyu Snzjgsk About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. Equipped with a Heidenhain TNC 310 path control. The user-friendly Heidenhain plain-language dialog makes program creation especially easy. HEIDENHAIN TNCs are workshop-oriented path controls that allow you to program conventional milling and drilling operations directly at the machine in easy-to-understand plain text. Even at maximum spindle speeds, the machine runs very quietly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power at our facility.

Stanje: zelo dobro (rabljeno), 2 dvižni sistemi, Kardex XP 500, pribl. 7,35 m visoka, 240 oz. 495 kg na polico, Polica: pribl. 2,45 m x 81 cm – rabljeno - : Cena na kos iz lokacije: 26.950 € (neto), demontirano, zapakirano in naloženo, brez prevoza in ponovne montaže! Proizvajalec: Kardex Tip: Shuttle XP-500-2450-813 Št. naprave: 17001175/001 Letnik: 2017 Dovoljena skupna nosilnost: 2x33.500 kg Nosilnost na polico: light 240 kg / strong 495 kg Število polic: bo naknadno posredovano Dimenzija police: 2450 x 813 mm Dimenzije naprave: Širina: pribl. bo naknadno posredovano (najverjetneje pribl. 2,78 m) Globina: pribl. bo naknadno posredovano (najverjetneje pribl. 2,92 m) Višina: pribl. 7.350 mm Hnedpfox Ry Ddsx Aagok 3/N/PE400V, 17,0A, 5,6 kVA Stanje: dobro – zelo dobro, na splošno malo uporabljano Na voljo: od pribl. sredine januarja 2026 Lokacija: 71063 Sindelfingen

Stanje: zelo dobro (rabljeno), HEIDENHAIN TNC-310 Travel paths: 500 x 260 x 480 mm (+ quill 160 mm) Hsdpfx Aaofrbtdogenk Cross-table: 880 x 320 mm Equipped with manual handwheels Spindle speeds: 100–9,000 rpm Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, poteza s peresom: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, X-500, Y-250, Z- spindle stroke 160, W- machine head travel 480, table 880 x 320, max. 320 kg, SK 32 spindle taper, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124 control. Extensive accessories included. Hnjdpfxeq R Rb Ho Aagjk

Stanje: dober (rabljeno), Leto izdelave: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Chuck diameter: 250 mm Cross slide travel: 260 mm Distance between centers: 850 / 1350 mm Main Spindle Spindle nose: DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle taper: metric 80 Spindle diameter at front bearing: 120 mm Main Drive AC Drive power: 12 kW Max. torque: 920 Nm Speed range: 10 – 3000 rpm Gear stages: 2 Selectable speeds: Stepless Feed Drive Hedpfxswftvie Aagonk X-axis feed force: 5000 N Z-axis feed force: 10000 N X-axis rapid traverse: 8 m/min Z-axis rapid traverse: 10 m/min Tool Holder Multifix; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill taper: MT5 Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF DELIVERY Including (not limited to): - Gildemeister lathe - SMW Autoblok Hi-Grip high-precision chuck - Chuck jaws - Multifix tool post - Complete operating documentation - Full scope of supply as per photo documentation We accept no liability for the correctness, completeness or currentness of the information provided.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 475 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vrtenja: 42.000 obr/min, premer mize: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured in our facility. The machine once again meets original factory tolerances! Working Area: - X-axis: 475 mm Hnjdpfx Aevvlmceagsk - Y-axis: 600 mm - Z-axis: 400 mm - Clearance Height: 500 mm Tool Changer: 52 positions Spindle: HSK40E, max. 42,000 rpm Tool Measurement Laser for tool calibration Handheld Control Unit Minimum Quantity Lubrication Prepared for extraction system (e.g. for graphite machining) Spindle Compensation Precision Package CNC Control: Röders RMS6, latest version The machine can be viewed in operational condition at any time. For more information about the type and scope of our refurbished machines, please visit our website or our Hüttmann YouTube channel.

Stanje: zelo dobro (rabljeno), Drilling capacity: 20 mm Spindle mount: FEHLMANN Spindle speeds: 50–6,300 rpm Throat depth: 276 mm Hnsdpfxsuy Sazs Aagek Cross table: 530 x 255 mm Digital readout Various accessories MARCELS MASCHINEN CH