Tornos Deco 13 nakup rabljenega (113)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, največja hitrost vretena: 12.000 obr/min, Premer palice (maks.): 13 mm, število osi: 6, This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 - 12,000 rpm. The machine is equipped with a linear tool system with 6 tool positions and offers full machining capabilities for turning, drilling, threading, and tapping. If you are looking for a high-quality turning machine, you should consider the TORNOS Deco 13 b Swiss Type Lathe we offer for sale. Contact us for further details. • Capacity: • Maximum bar diameter: 13 mm • Axes: • Number of axes: 6 (X1, Y1, Z1, X2, Y2, Z2) • Main spindle (S1): • Max. bar capacity: 16 mm • Recommended minimum bar diameter: 3 mm • Maximum workpiece length: 160 mm • Collet type: Schaublin F20 • Sub spindle (S2): • Max. workpiece diameter: 16 mm • Maximum workpiece length (counter operation): 160 mm • Spindle speed: 100-12,000 rpm • Clamping force: 730 daN • Axis travel: • X1: 35 mm, Y1: 158 mm, Z1: 187 mm • X2: 118 mm, Y2: 160 mm, Z2: 174 mm • Feed rates: • Max. axis speed: 20 m/min • Guide bush: • Max. bar capacity: 16 mm • Tool system: • Linear tool system (front + rear) • Number of tool positions: 6 (3 axial + 3 cross) • Tool spacing: 38 mm • Max. rotating tools: up to 3 • Driven tools (S3): Fedpfeywlhbsx Abtegc • Max. speed: 8,000 rpm • Power: up to 1.1 kW • Drilling capacity: up to 8-10 mm • Thread cutting capacity: M6-M8 • Counter operations: • 3 working positions • Full machining (turning, drilling, threading, tapping) • Cooling system: • Oil capacity: 200 L • Chip container: approx. 100 L Additional equipment • Bar feeder (integrated): • Maximum bar length: 3.3 / 3.85 / 4.2 m • Minimum bar length: 1.2 m • Bar diameter range: 3-16 mm • Part unloader • Oil bath system • RS232 interface • Work area lighting Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 180 mm Fodpfxsuhayis Abtsgc - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 6 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of stations: 6 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm FRONT UNIT - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm BACK WORKING - Number of stations: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 53,892 h EQUIPMENT - Control: FANUC PNC DECO - Driven tool drives on: S2, S5 - Driven guide bushing - Parts extraction - Parts ejector - Coolant tank

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. workable length: 160 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.1° Fedpfeuhaz Tex Abtjgc - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 3 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Installation space: 1100 x 7270 mm - Machine height: 1950 mm - Machine weight: 3,000 kg MACHINE HOURS - Power-on hours: 22,834 h EQUIPMENT - Control: Fanuc PNS DECO - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: ROBOBAR SSF

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 180 mm - Spindle speed: 12,000 rpm Fgsdpfx Abjuhaypotec - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUBSEQUENT MACHINING - Number of positions: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE OPERATING HOURS - Operating hours: 30,161 h ACCESSORIES - Control unit: FANUC PNC DECO - Driven tool motorization at: S2, S3, S5 - Driven guide bushing - Parts removal - Parts ejector - Coolant tank

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 Fodew T Tcwepfx Abtegc - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank Fedpfxjuhhp Se Abtogc * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: rabljeno, CNC-Langdrehautomat TORNOS DECO 13A Fgodpsuhhp Ejfx Abtec

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 Fodpfsuha D Uox Abtegc - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of stations: 5 - Number of powered stations: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of stations: 5 - Number of powered stations: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of powered stations: 4 - Driven tool speed: 8,000 rpm SUB OPERATIONS - Number of stations: 6 - Number of powered stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 14 kVA MACHINE HOURS - Operating hours: 42,762 h EQUIPMENT - Control: Fanuc PNC DECO - Motorization of driven tools at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: Iemca Genius 118 / 32 LL - Coolant container

Stanje: dober (rabljeno), Leto izdelave: 2019, 6 osi Glavno in protivreteno C-os na glavnem in protivretenu Obdelava zadnje strani Pnevmatski izmetalec Transportni trak za obdelovance Visokotlačni sistem Magazin Tornos Robobar SBF-213 Fgedpszb A Ilefx Abtsc

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, obratovalne ure: 34.434 h, - Polnilec Iemca MINI BOSS 325 CNC/32 - Transporter za ostružke CONVEYORS IND. ASS. Model: TMPF 1088 - Protipožarni sistem Kraft&Bauer (leto 2021) Fgedpfxsy Uffze Abtjc Stroj je vedno deloval samo s polnim oljem, nikoli z vodno emulzijo. Delovne ure: 34.434

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of stations: 8 - Number of powered stations: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of stations: 8 - Number of powered stations: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT DEVICE - Number of stations: 4 COUNTER OPERATIONS - Number of stations: 8 - Number of powered stations: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required space: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 51,458 h - Spindle hours: 16,839 h EQUIPMENT - Control: Fanuc 31i-B - Three-color status lamp Fgjdoyacvtepfx Abtjc - Power-driven tooling motorization at: S11, S21, S51 - Driven guide bushing - Parts removal unit - Parts ejector - Parts transfer conveyor - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. Must be inspected by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT ATTACHMENT - Number of positions: 4 SUBSEQUENT MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 51,458 h - Spindle hours: 16,839 h Fedpfjyacvmex Abtegc ACCESSORIES - Control unit: Fanuc 31i-B - 3-color status lamp - Motorization of driven tools on: S11, S21, S51 - Driven guide bushing - Part removal device - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system * NB: Functionality not guaranteed. Should be inspected by a qualified company appointed by the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 Fedeyacvgjpfx Abtogc - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT ATTACHMENT - Number of positions: 4 BACK OPERATIONS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2800 kg MACHINE HOURS - Power-on hours: 48,352 h - Spindle hours: 12,855 h EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - High-speed tooling on: S11, S21, S51 - Motorized guide bushing - Parts removal unit - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: TORNOS SBF326-3.2M - Fire extinguishing system* NB: Proper functioning not guaranteed. To be checked by a qualified company appointed by the buyer. - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 37.578 h, Premer palice (maks.): 8 mm, število osi: 9, Tornos Deco 10 je bil izdelan leta 2005. Gre za švicarski stružnik z bobnom in podajalnikom palic, filtrom s kapaciteto 25 litrov in integrirano hidravlično enoto. Omogoča obdelavo različnih premerov palic do 8 mm, kar zagotavlja vsestranskost pri natančnih operacijah. Razmislite o nakupu tega švicarskega stružnika Tornos Deco 10. Za dodatne informacije nas kontaktirajte. Fgodoy S Aq Aspfx Abtjc • Boben s podajalnikom palic • 10+5" HYBRID boben • Integrirana hidravlična enota • Zadnja/sprednja podporna noga • Višina konice 1100 mm • Filter s prostornino 25 litrov • Elektrika: 380 V, 3 faze, 50/60 Hz napetost motorja • Krmilna napetost: 24 V DC • Kompatibilnost palic (za 14 vodilnih cevi): • Palice premera 1–4 mm • Palice premera 4 mm • Palice premera 8 mm Dodatna oprema • 1 kos oljne posode • 1 posoda za zbiranje ostružkov Tehnične podrobnosti Protipinza: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine is equipped with a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operation. Ideal for complex Swiss-type turning operations. Contact us for further information about this machine. 2 similar machines available! Additional Information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub spindle (S4) • FANUC 16i-TB control system Fodpey S Aqijfx Abtegc • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front and rear support foot • “HYBRID 10+5” drum with 14 guide holes for 1-4 mm bars and 14 guide holes for bars 4.1-10 mm; up to 8 mm bar diameter without bar preparation • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Comprehensive set of measuring instruments

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), TORNOS DECO 2000 CNC Lathe TECHNICAL DATA Dimensions and Weights Dimensions: Length: 2000 mm Width: 1260 mm Fsdpfx Ajmdn Imsbtegc Height: 1950 mm Weight: Empty: 2550 kg Specific floor loading: Approx. 8 daN/cm² Axes 1 movable headstock: Z1, S1 2 independent linear tool systems on vertical slides: X1 / Y1 (S6) – X2 / Y2, S2 1 front tooling unit, 4 spindles: X3 / Z3 1 independent pickup spindle: Y4 / Z4, S4 1 independent tool system for rear machining: X4 (S5) General Data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Maximum workpiece length: With rotating guide bushing: 180 mm Operation in collet: 30 mm Main spindle speed: 12,000 rpm Spindle rotation direction: Preferably: right-hand Main spindle motorization: Continuous duty: 2.2 kW Intermittent duty: 3.7 kW Pickup spindle motorization: Continuous duty: 1.5 kW / Intermittent: 2.2 kW Headstock collet type: F20 Guide bushings: Rotating, fixed Guide bushing collet type: Meister: 605 Number of tools for main operation: Fixed: 2 x 5 / Driven: 3 + 3 Number of front tools: Fixed: 4 / Driven: 3 Tool cross-section: 12 x 12 mm Tool collets: Rotating standard: ESX 20 Number of tools in rear machining: Fixed: 3 + 3 / Driven possible: 3 + 3 Bar loader: Yes Parts removal: Basic version Machine type: Sliding headstock Machine axis height: 1100 mm Headstock travel: 255 mm Barloader position: Right of operator Bar capacity: 1–16 mm Telescopic tube bore: 6–17 mm Spindle speed: Left / right: -12,000 to 12,000 rpm Headstock feed rate: Max. 20 m/min No liability is accepted for the correctness, completeness, or up-to-dateness of this information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2560460122, Tornos Swiss GT13/6 – Sliding Headstock Automatic Lathe CNC Control FANUC 31i-B, 6 axes, 13 mm capacity Base Machine Equipment: - 6 linear axes - Independent main and sub-spindle - Synchronously rotating guide bush - Configuration for operation without guide bush - C-axis for main and sub-spindle - Adjustable pneumatic ejector, including sub-spindle cleaning with coolant - 3-color signal tower (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Interface for oil mist extraction - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor) Guide bush type: B (853) - Max. part length in one clamping: 180 mm Fodpfjyzigcsx Abtegc - Conversion kit for work without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front carrier - Tool holder for 4 turning tools 12x12 mm on the rear side of the carrier - S11 live tool drive (10,000 rpm) for rotating tools mounted on the front of the X1/Y1 carrier - 1 drive module for cross machining with 3 spindles for ESX 16 collet (2x 10,000 rpm and 1x 6,250 rpm) - S21 live tool drive (6,000 rpm) for up to 2 driven units mounted on the rear side of the X1/Y1 carrier (driven units not included) - Tool holder with 4 bores Ø 22 mm for stationary secondary operation tools Sub-Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), Max. Ø capacity: 13 mm - C4 axis function Tool System for Back Operations: - Base holder for 8 rear tools; the 4 upper positions can accommodate rotating and/or stationary tools (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bore (for upper positions) - S51 live tool drive (6,000 rpm) for rear working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We offer you not only a high-quality product, but also tailored financing solutions to meet your individual needs. Whether a down payment, installment plan or custom financing model – together we’ll find the right solution. Upon request, we also handle the complete transport organization, from planning to reliable delivery, ensuring a smooth and punctual process so you don’t have to worry about a thing.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of positions: 4 BACKWORKING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Floor space required: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2800 kg MACHINE HOURS - Power-on hours: 44,456 h ACCESSORIES - Control: Fanuc 31i-B - 3-color status light - Driven tools powered on: S11, S21, S51 - Driven guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump Fgedoyacvaspfx Abtec * with paper filter - Bar feeder: FMB Minimag20/3200 - Fire extinguishing system* NB: Functionality not guaranteed. Should be checked by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of driven positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT ATTACHMENT - Number of positions: 4 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA DIMENSIONS & WEIGHT - Footprint: 2170 x 1140 mm - Machine height: 1890 mm - Machine weight: 2,800 kg Fgjdpoyacu Nefx Abtoc MACHINE HOURS - Power-on hours: 44,449 h ACCESSORIES - Control: Fanuc 31i-B - 3-color status light - Motorization of driven tools at: S11, S21, S51 - Powered guide bushing - Parts catcher - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: FMB Minimag20/3200 - Fire extinguishing system* NB: Functionality not guaranteed. To be checked by a qualified company of the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machining length: 190 mm - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 13 mm Fgsdpfx Asyacu Ajbtec - Spindle speed: 15,000 rpm - Spindle drive power: 4 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of powered positions: 3 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW TOOL HOLDER 2 - Number of positions: 8 - Number of powered positions: 2 - Driven tool speed: 6,000 rpm - Driven tool power: 1 kW FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 8 - Number of powered positions: 4 - Driven tool speed: 6,000 rpm - Driven tool power: 0.75 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 2,170 x 1,140 mm - Machine height: 1,890 mm - Machine weight: 2,800 kg MACHINE HOURS - Power-on hours: 48,838 h ACCESSORIES - Control: Fanuc 31i-B - 3-color status indicator lamp - Powered tool drives at: S11, S21, S51 - Driven guide bushing - Part removal device - Parts ejector - Parts conveyor - Chip conveyor - Coolant tank: KNOLL * with high-pressure pump * with paper filter - Bar feeder: FMB Minimag20/3200 - Fire extinguishing system * NB: Functionality not guaranteed. To be inspected by a qualified company commissioned by the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Stroke: 66 mm Fodpfx Absy Aprnotjgc - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1500 kg EQUIPMENT - CNC control: Fanuc - Driven tool motorization on: S2, S3, S5 - Powered guide bush - Parts ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT Fgjdpfey Aprhox Abtoc - CNC Control: Fanuc - Driven tools powered on: S2, S3, S5 - Powered guide bushing - Part ejector - Coolant tank - Bar feeder: LNS TRYTON

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 1700 x 1010 mm Fsdpfx Aboy Aprbotjgc - Machine height: 2000 mm - Machine weight: 1,500 kg EQUIPMENT - Control: Fanuc - Driven tool motorisation at: S2, S3, S5 - Driven guide bushing - Parts catcher - Coolant tank - Bar feeder: LNS TRYTON

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet Fedpfxox D D Iks Abtogc • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes

Stanje: zelo dobro (rabljeno), ohranjenji držala orodja za DECO 20 - DECO 26 3 kosi - TORNOS fiksna držala orodja za X1Y1; X2Y2; X4Y4 ----- - Držalo stružnega noža za 16x16: - Cena na držalo 180,00 €/kos za DECO2000 ø20 & 25 mm DECO 20 in DECO 26 3x s čelno ploščo 1x brez čelne plošče ----- Dostava znotraj BRD 12,00 € Dostava znotraj EU 25,00 € Poleg tega imamo tudi 6 vretenastih redukcijskih vložkov: bili so v DECO 26 mm notranji ø 8,0 mm; ø 12,0 mm; ø 21,0 mm; 3x ø 26 mm Fodsy Apn Ajpfx Abtjgc zunanji ø 30 mm, navoj M32x1,5, dolžina cca 360 mm Prirubnica - zunanji ø 45 mm x 9 mm, 4x izvrtina z navojem M4 2x utor 8 mm Posebna cena za vseh 6 redukcij z dostavo 380,00 € Po želji z veseljem pošljemo slike, za to potrebujemo vaš e-mail naslov.