CNC stružnica

TORNOS Deco 2000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It comes equipped with a drum-type bar loader, an integrated hydraulic unit, and provides support at both the front and rear with a center height of 1100 mm. The machine features a sliding headstock, an oriented spindle stop, and a cross-slide with tool holders. It is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information about this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018). 2017 Overhaul included: Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindles S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the coolant pump, all coolant pipelines, and the coolant sensor. Replacement of wipers on the cross-slides. Replacement of all pneumatic lines and valves. Replacement of the machine compartment lighting, viewing windows, external fan, fan cables, and keyboard. Additional options (special services): Complete replacement (not just overhaul) of the guide bushing. Installation of a new central lubrication system. Replacement of bellows couplings, external encoders, and the display. Replacement of control and amplifier fans. Upon recommissioning, the "spindle positioning S4" option was activated and the bar loader set up. Additional Information Ffjdpox D D Ikefx Abvsw • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Sliding headstock • Cross-slide with 4 tool holders T11-T14 for vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • HYBRID 10+5 drum-type bar loader • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars (bars up to 8 mm without preparation) • Tryton collet • 2 different hybrid drum magazines • Directional-dependent spindle stop S1 • Can be configured with Robobar SSF 3 m bar loader Technical Specification Counter Spindle: Yes

Stanje: rabljeno, Leto izdelave: 1980, x-axis travel 300 mm y-axis travel 160 mm z-axis travel 340 mm Tool holder SK40 Spindle speed 40-2000 rpm Control unit: HEIDENHAIN Aktiv Table size 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Fodpfew A Apyjx Abvsfw Space requirement approx. LWH 1200x1100x1600 mm - Powered feed on X and Z axes - Additional swivelling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and milling cutters included - Operating manual

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 75.336 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: T62204, Oprema: dokumentacija / priročnik, TECHNISCHE DATEN - Achszahl: 10 - Spindelanzahl: 2 HAUPTSPINDEL - Maximale Stangendurchmesser: 25,4 mm - Maximale Bearbeitungslänge: 200 mm - Spindeldrehzahlen: 10.000 U/min - C-Achse Positioniergenauigkeit: 0,1° GEGENSPINDEL - Maximale Stangendurchmesser: 20 mm - Spindeldrehzahlen: 10.000 U/min - Spindelleistung: 3,7 kW - C-Achse Positioniergenauigkeit: 0,1° - Anzahl Führungsbuchsenhalter: 2 FÜHRUNGSBUCHSENHALTER 1 - Anzahl Stationen: 5 FÜHRUNGSBUCHSENHALTER 2 - Anzahl Stationen: 5 - Anzahl angetriebene Stationen: 4 Fedpfx Aow Stndjbvjfw - Drehzahl angetriebene Werkzeuge: 8.000 U/min FRONTAUFNAHME - Anzahl Stationen: 4 - Anzahl angetriebene Stationen: 4 - Drehzahl angetriebene Werkzeuge: 6.000 U/min ZWEITBETRIEB - Anzahl Stationen: 7 - Anzahl angetriebene Stationen: 3 - Drehzahl angetriebene Werkzeuge: 8.000 U/min STROMVERSORGUNG - Versorgungsspannung: 400 V - Gesamtanschlussleistung: 14 kW GEWICHT & ABMESSUNGEN - Grundfläche der Maschine: 2.270 x 1.650 mm - Maschinenhöhe: 2.200 mm - Maschinengewicht: 3.500 kg AUSSTATTUNG - CNC-Steuerung: Fanuc - Antrieb für rotierende Werkzeuge an: S2, S3, S5 vertikal/horizontal - Rotierende Führungsbuchse - Werkstückfänger - Werkstückauswurf - Kühlmitteltank - Stangenlader: ROBOBAR SSF

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Spindle bore: 25 mm Item: CNC Swiss-type automatic lathe Brand: Tornos Model: Deco 2000/20 Year of manufacture: 2001 Control: Fanuc Spindle bore: D25 mm Max. speed: 7,000 rpm Tool carrier: 2 (X, Z, Y axes) Front tool post: 1 (X, Z, S axes) Bar loader: Tornos Robobar SSF Ffodpfx Abjtwglasvow Chip conveyor: hinge belt conveyor Other: various accessories, e.g. multi-sided striking unit, high-frequency spindle Please contact us for further information and photos by e-mail (at) or *

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X travel: 750 mm Ffjdpfx Ajwzx Nmebvew Y travel: 600 mm Z travel: 520 mm Table clamping surface: Ø 700 x 500 mm Spindle speed: 42,000 rpm Tool holder: HSK E50 Control: HEIDENHAIN iTNC 530 Automatic tool changer: 60 positions Rapid traverse: 50 m/min Table load – central/maximum: 350 kg Total power requirement: 50 kVA Machine weight approx.: 9 t Space requirement approx.: 3.2 x 2.65 x 2.8 m 5-axis simultaneous HSC machining center, NC rotary/swivel table 700 x 500 mm, B-axis 180°, C-axis 360°, Chip conveyor, Electronic handwheel, Laser, Preparation for 3D probe HEIDENHAIN TS 641 (probe not included) BA 4, Oil mist extraction system, Spindle cooler, No internal coolant supply (IKZ), Approx. 141,300 power-on hours, approx. 64,500 total spindle hours Machine in good condition (measurement protocol available).

Stanje: rabljeno, TORNOS DECO 2000/20 je CNC avtomatski stružni stroj z visoko natančnostjo, veliko zanesljivostjo in preciznostjo. Opremljen je z 10 osmi, premer prehoda vretena Ø20 mm, dvema neodvisnima vozičkoma (X1‑Y1, X2‑Y2) s po 5 pozicijami, 4 pogonskimi orodji in protivretenom (3) do 10.000 vrt/min, kar omogoča prilagodljive možnosti obdelave. Tehnični podatki: vreteno brezstopenjsko do 10.000 vrt/min, motor vretena 2,2 kW, resolucija C-osi 0,1°, priklop 50 Hz 3x380‑420 V, skupna priključna moč 11 kVA, masa stroja cca 3000 kg, mere L2950×B1100×H2300 mm. Oprema: avtomatski podajalnik SBF tip 535, lovilec kosov in naprava za prednastavitev orodij. Dosega ozke tolerance; primeren za avtomobilsko, urarsko, orodjarsko, letalsko in medicinsko industrijo. Fedpexx U I Rjfx Abvefw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: TORNOS Tip: DECO 2000/07 Leto: 1996 Št. stroja: T 62136 Država: Švica Specifikacije: Največ v vpenjalni čeljusti: 7 mm Krmiljenje FANUC 16 T-B Števec ur, stroj prižgan: 24.095 ur Opremljen z: Vpenjalni nastavek Magazin za palice Popolna C-os Prijemalo za obdelovance Nosilci za orodja Sistem za hlajenje Fodpfx Absxq D Svsvofw Ključi za upravljanje itd.

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, X/Z travel: 220mm/635mm, spindle speed: 5,000 rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4,500kg. An on-site inspection is possible. Fodpfx Abev Uqcgjvsfw

Leto izdelave: 2001, stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm Fjdpfet Ea Tfsx Abvefw - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining

Stanje: dober (rabljeno), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The machine is in good condition. Technical data: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table type: NC tilting rotary table Rotary/tilting axes: B-axis approx. -10° / +95° C-axis (rotary): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe at an additional cost upon request. Prices excl. VAT. Ffedpfjxvzy Ujx Abvew Inspection by appointment possible. Contact us, our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.