Emco Bs 3 nakup rabljenega (143)

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopMill, Opis: Vreteno: Tehnologija: Direktni pogon Hitrost vrtenja: 10.000 min⁻¹ Moč (max.): 7 kW Gjdpoxthpwefx Afqott Navor (max.): 41 Nm Vpenjalni stožec orodja: SK30 Delovna miza: Vpenjalna površina: 520 x 300 mm Največja obremenitev mize: 100 kg Splošno: Magazin orodij: 20 postaj Hitri pomik v X/Y/Z: 24 m/min Oprema/Dodatki: Merilni sistem poti: Neposredni (steklena merila) v X/Y Upravljanje odrezkov: Transporter odrezkov Sistem hlajenja: Črpalka emulzije s 8 bar Merjenje obdelovanca: Merilna sonda, Marposs WRP 45 Merjenje orodja: Sonda, Marposs TS30 4. os: Walter TANI 100 NEG s 3-čeljustnim vpenjalom in konjičem Absorber oljne megle: Mehanski ločevalnik, proizvajalec Reven Način nastavljanja: Elektronski ročni kolešček Dodatna oprema: Pršilna pištola Ostali dodatki: Razni rabljeni držala za orodje

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 100 mm, Orodjarska rezkalna stroj V/H Proizvajalec: Emco Tip: FB-4 Leto izdelave: 2004 Krmiljenje: prikazovalnik Heidenhain ND-760 Tehnični parametri: ----- • Pomiki X-Y-Z: 450 x 300 x 350 mm • Vpenjalna površina: 800 x 400 mm • Vpenjanje orodja: SK-40 • Hodi pinole: 100 mm • Rezkalna glava vrtljiva ± 90° Gtedpfsx Tzk Rsx Afqot • Vreteno: 50 – 2.500 obr/min • Izbiranje hitrosti: 18 stopenj • Električno centralno mazanje • Strojna luč • Hladilni sistem • Kabina proti brizganju (zložljiva) • Teža: 1.550 kg • Dimenzije DxŠxV v mm: 1.485 x 1.500 x 1.700 mm Dodatna oprema: ----- • 4x nastavljive noge za stroj • Navodila za uporabo • Vpenjalni ključ • Nasprotni ležaj za vodoravno obdelavo • Set gredi za vodoravno obdelavo • Zaščitni pokrov mize (trenutno odstranjen) Na voljo sta dve identični stroji, obe servisirani in delno prenovljeni v Q4-2025.

Stanje: dober (rabljeno), EMCO Tool Milling Machine Type FB 3 (not a DECKEL FP 1) with 3-axis digital readout HEIDENHAIN Year of construction: 2007/2008 3 units available! Travel distances X/Y/Z: 300 x 200 x 350 mm Spindle taper vertical/horizontal: SK 30 DIN 2080 Tool clamping: manual Quill travel: 45 mm Swiveling vertical milling head: +/- 90 degrees Spindle power: 1.1/1.4 kW (60/100% duty cycle) Speed vertical/horizontal: 80 – 2,200 rpm Gear stages: 8 Fixed angle table: 600 x 200 mm Infinitely variable feed: X/Y axis: 0-550 mm/min Rapid traverse X/Y axis: 1200 mm/min Feed Z axis: manual Machine dimensions (W x D x H): 1150 x 1410 x 1550 mm Weight: approx. 500 kg Standard Equipment: - 3-axis HEIDENHAIN digital readout - Coolant unit integrated in the machine base - Angle table, manual central lubrication - Swiveling device for vertical spindle - Chip tray - Splash guard - CE compliant Special Features: - HEIDENHAIN precision digital readout - Stepless feed control/rapid traverse in longitudinal and cross directions - Operator’s panel with clear keypad for easy operation - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting hardened gib strips Gtsdoxx R Itjpfx Afqst - Removable coolant tank Additional Equipment: - SEMER make micro-spray system connected to coolant switch/standard coolant pump Application Area: - Ideal for instrument and prototype construction; training; small workshops; professional DIYers The machines come from a training facility. Condition: good to very good Available from March 2026, possibly earlier by arrangement.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: Godpex E Dncofx Afqott • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7 A-Q-2701, Rabljeni CNC stružnica Gtodpfxox Tbcys Afqjt Znamka: EMCO Model: Hyperturn 665 Leto izdelave: 2002 Krmiljenje: 840 D S transportnim trakom za odrezke

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Gsdpfx Afew Tg Adjqett Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 29.849 h, Funkcionalnost: popolnoma funkcionalen, The Emco Maxxturn 45 SYM is in good condition and is currently still in production. Mainly, plastic components have been manufactured with this machine. Six months ago, the operator panel with display and the air conditioning unit were replaced. Last maintenance was performed in 09/2025, and the machine geometry was checked. The machine can still be inspected in production until CW 4/2026. Technical data: Control: Siemens 840 D. The machine features a Y-axis. Main spindle: Gtedox Tu Rqjpfx Afqet Speed: 6,300 rpm. Counter spindle: 6,300 rpm. Spindle bore max. 45 mm 2 x C-axis, 0.001° High-pressure coolant system at the tool turret. Chip flushing for the counter spindle. Sauter tool turret with 12 stations, VDI25. All stations equipped for driven tools. Speed range: 6,000 rpm. Travel in X/Z/Y axes: 160/510/ +40 / -30 mm Accessories: 2 x Hainbuch chucks for SK52 clamping heads High-pressure coolant pump. Finished parts catcher. Interface for bar feeder. New control cabinet air conditioning unit LED signal lamp, 4 wedge clamps, machine documentation. Machine keyboard with cover. 8 fixed tool holders VDI 25, 2 x axial driven tools 1 x radial driven tool The tools shown in the images are not included in the sale.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. krmilni sistem: SINUMERIK 828D Pomiki po oseh X/Y/Z: 1200 / 600 / 500 mm Razdalja med mizo in koncem vretena: 100 - 600 mm Število osi: 3 Hitri pomiki po oseh X/Y/Z: 30 m/min Delovni pomiki X/Y/Z: 0 - 15 m/min Vpenjalna površina: 1300 x 630 mm Največja obremenitev mize: 1500 kg Menjava orodij Število orodnih postaj: 30 Največji premer orodja: 80 mm Rezkalno vreteno Največja hitrost: Mehansko vreteno 10 000 obr/min, motorno vreteno 15 000 obr/min Največji navor: mehansko vreteno (S6) 100 Nm, motorno vreteno (S6) 100 Nm Dimenzije (dolžina x višina x širina): 3370 x 2950 x 3000 mm Teža stroja: 12000 kg Gjdpfx Asx Apa Nefqstt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Krmiljenje Heidenhain TNC 620 Pomiki X/Y/Z: 350 x 250 x 300 mm Vrtljaji vretena: 12.000 min-1 Rotacijska in nagibna miza Magazin orodij za 50 orodij, ISO 30 Gtedpfx Afox Rpaheqjt Transporter ostružkov LANG avtomatizacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Gtodpfxoxzq Ncj Afqst Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: zelo dobro (rabljeno), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis digital readout EMCO Year: 2007 with CE 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: ø 340 mm Swing diameter over cross slide: ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Gtedpfxsxx S R Ao Afqot Cross slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance centre of turning to top slide: 34 mm Top slide (compound rest) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: ø 70 mm Max. chuck diameter: ø 200 mm Max. faceplate diameter: ø 200 mm Spindle speeds: 40 - 3000 rpm Infinitely variable speed control Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard): 0.4 - 7.0 mm Tailstock: Quill diameter: ø 50 mm Quill taper: MK 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weight (between centers): 50 kg, with tailstock support: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and for training purposes. Equipment/Features: - EMCO 3-axis digital display with color monitor - Potentiometer, emergency stop button, digital speed display on the control panel next to the DRO - 3-jaw chuck - MULTIFIX toolholder head size B - Electrically interlocked chuck guard - Quick-action collet chucking device - MICROJET coolant spray device - Chip guard/rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility "Due to its quality and price, the machine is not suitable for private individuals." Available from March 2026.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, Krmilna enota Blagovna znamka: SIEMENS Model: SINUMERIK 840D Krmilnik Blagovna znamka: SINUMERIK 840D Glavni pogon Območje hitrosti vretena: 0–5000 min⁻¹ Moč motorja vretena: 29 kW Število osi: 6 Dodatna oprema Revolver za orodje: 12-pozicijski VDI 30 radialni revolver z logiko smeri za do 12 pogonjenih postaj orodja B-PowerMill: Motorizirano rezkalno vreteno z 24-pozicijskim magazinom orodja, 210° zasučno območje Opcijski paket orodij: vključuje nosilce fiksnih in pogonjenih orodij, nosilce kleščnih vpenjal, reducirne tule, in delovne ključe Votli vpenjalni cilinder z vlečno cevjo / Izmetalec kosov in splakovanje skozi protivreteno / Naprava za pobiranje kosov za gotove dele Naprava za pobiranje gotovih delov / Naprava za hlajenje v transportnem traku za odrezke / Visokotlačna črpalka (14 bar) in fini filter Izplakovalne črpalke (3,7 bar) / Klima naprava za elektro omaro / Elektrostatni separator oljne meglice Hidravlična enota / Strojna luč / Vmesnik za nožno stikalo / Signalna luč Dokumentacija vključno z ročnim upravljalcem, PC tipkovnico, mrežno pripravo, nadzorom orodja, stružnim oknom, čistilno pištolo Vpenjalna naprava za glavno vreteno: Hainbuch BZI 80 centrično vpenjanje Ta 6-osni EMCO Hyperturn 665MC Plus CNC stružno-rezkalni center je bil izdelan leta 2008. Opremljen je s CNC sistemom z Y-osjo in B-osjo za celovito obdelavo struženih in frezanih delov. Z integriranimi motorji na glavnem in protivretenu omogoča glavno vreteno do 5000 min⁻¹ in protivreteno do 7000 min⁻¹. Vključuje 24-pozicijski magazin orodja in krmiljenje SINUMERIK 840D. Če iščete kakovostne sposobnosti struženja in rezkanja, razmislite o stroju EMCO Hyperturn 665MC Plus iz naše ponudbe. Kontaktirajte nas za več informacij o stroju. Vrsta uporabe Gtodpfx Afox D Hwnsqot Struženje

Leto izdelave: 2001, Stanje: delavnici obnovljeno (rabljeno),

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Gedpfxju Ixwis Afqjtt Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, Krmiljenje EMCO (PC krmiljenje, operacijski sistem Windows, 12,1" LCD zaslon, 1 x RS232, 2 x USB, 3 x LAN 10/100Bit) Dimenzije mize 700 x 520 mm Maks. obremenitev mize 500 kg "T" utori na mizi 5 x 18 x 100 mm X hod 600 mm Y hod 500 mm Z hod 500 mm Razdalja med vretenom in površino izvrtine mize 100 – 600 mm Hitrost vrtenja 0 – 10.000 obr/min Vpenjalo SK40 Hitri pomiki X/Y/Z 24 m/min Gtjdjx Atv Ujpfx Afqjt Pomik X/Y/Z 10 m/min Pogonska moč 13 kW Električna priključitev 400V / 3 PE Priključna moč 20 kVA Teža 4.200 kg Dimenzije D/Š/V 2.100 x 2.500 x 2.700 mm Oprema, dodatki - Hladilni sistem - Orodja - Noge za stroj Stroj je skoraj kot nov. Bil je v izobraževalni delavnici.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis, and B-axis, designed for complete machining of turning-milling components. Integrated spindle motors (ISM) on main and counter spindles with a liquid-cooled thermal compensation system. Drive output: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Counter spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Counter spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute cutting forces across two axes, resulting in extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. Swivel range of 210° is steplessly adjustable and can be interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control, includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through counter spindle * 12-position radial VDI 30 tool turret with directional logic for up to 12 live tool stations Swivel speed adjustable via feed switch Performance data: Max. 6.7 kW at 2650 rpm Constant torque: 25 Nm Speed range: 0–5000 rpm Gtodoxz Ab Rjpfx Afqjt - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming * Finished part catcher * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinge belt") * Coolant system integrated in chip conveyor 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 rinse pumps with 3.7 bar * Electrical cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Turning window - Cleaning pistol - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Stanje: rabljeno, Leto izdelave: 2000, Technical details: Turning diameter: 360 mm Turning length: 520 mm Godpfx Afox Dcgxjqott Total power requirement: 20 kW Machine weight approx.: 3.8 t Space requirement approx.: 3 x 2 x 2 m

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Upravljalna enota Model: 840 D Znamka: SIEMENS Glavni pogon Območje hitrosti vretena: 0-5000 Vpenjalni stožec (orodja): VDI 30 Število osi: 4 Pomiki Pomik X-osi: 260 mm Pomik Y-osi: 80 mm Pomik Z-osi: 610 mm Obdelovanec Gtsdpfxox D Hfls Afqot Premer obdelovanca: 65 mm Orodja Število mest v zalogi: 12 Mediji Transportni trak za ostružke: Da Dodatna oprema Haibuch vpenjalna glava na glavnem in protivretenu Lovilec obdelovancev 10 držal za orodja (2 aksialna, 2 radialna in 6 standardnih držal) Podajalnik Emco LM 1200 Ta 4-osni stružni stroj EMCO Maxxturn 65 je bil izdelan leta 2005. Opremljen je s krmilnim sistemom Siemens 840 D, 12-pozicijskim revolverjem za pogonska orodja in držalom orodij VDI 30. Glavno vreteno doseže do 5000 obr./min, protivreteno pa do 7000 obr./min. Vključuje vpenjalno glavo Hainbuch, lovilec obdelovancev in transportni trak za ostružke. Odlična priložnost za nakup tega stružnega stroja EMCO Maxxturn 65. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 64.321 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2SAY0351, stružna dolžina: 350 mm, premer struženja: 114 mm, največja hitrost vretena: 8.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 320 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 30 Nm, skupna višina: 2.100 mm, skupna dolžina: 2.500 mm, skupna širina: 2.000 mm, skupna masa: 2.500 kg, premer struženja nad ležiščem sani: 325 mm, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 18i-TB, število mest v zalogovniku orodij: 12, Število pogonskih postaj v orodnem revolverju 1: 6, EMCO MAXXTURN 25 CNC stružnica - Obratovalna napetost: 3 x 400 V - Frekvenca: 50/60 Hz - Nazivni tok: 26 A - Premer prehoda palice: 25,4 mm - Konjična razdalja: 445 mm - Razdalja med vreteni: 485 mm Stroj je opremljen s konjičkom, glavnim vretenom in 12-pozicijsko revolversko glavo za orodja. Stroj ima pogonska orodja (6 kosov) in Y-os. Pozor: brez držal za orodja, vidnih na fotografijah! Gtodsx Hwfqopfx Afqot Pozor: artikel je potrebno obvezno prevzeti v terminu, ki ga je treba uskladiti, med 04. in 12.03.2026. FCA D-75181 Pforzheim – naloženo na tovornjak.

Leto izdelave: 1982, Stanje: rabljeno, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Input voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions approx. (LxWxH): 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, equipped for depth measurement operation, is offered for sale including a base cabinet (Emco model for hardness testers). The device is suitable for the following test methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastic testing according to DIN 53 456 Other materials: testing possible only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, strain gauge and DC motor, for M4R-075 = 49 to 7355 N Test table Ø 90 mm, height adjustable via hand wheel Test table mount in accordance with DIN 51 225 = Ø 25 mm Operation and programming via control panel with graphic-capable, illuminated LC display Gsdpfxou N Avxj Afqjtt Accessories: Additional test tables/plates as shown in the photos Incl.

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Gtsdpfx Ajx Aq Hkjfqot Swing diameter: 220 mm Turning length: 700 / 665 mm Total power requirement: 17 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.63 x 1.98 x 1.94 m Swing diameter over bed: 430 mm Maximum part length: 510 mm Radial travel (X-axis): 160 mm Bar capacity diameter: 45 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Splošni podatki Gtjdpfex D E Hbex Afqjt Teža stroja: 620 kg Glavni pogon Število osi: 6 Hitrost vretena: 5000 min⁻¹ Moč motorja vretena: 29 kW Ta 6-osni EMCO Hyperturn 65 Powermill G2 je bil izdelan leta 2022. Gre za zelo produktiven CNC stružno-rezkalni center z glavnim in podvretenom, oba z maksimalnim navorom 250 Nm in hitrostjo do 5000 min⁻¹. Rezkalno vreteno omogoča do 12000 min⁻¹. Vključen je 40-pozicijski magazin za orodje, 12-pozicijski revolver in napreden krmilni sistem Sinumerik ONE. Če iščete visokokakovostno struženje in rezkanje, razmislite o nakupu stroja EMCO Hyperturn 65 Powermill G2 pri nas. Za dodatne informacije nas kontaktirajte. Vrste uporabe Struženje

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Swing diameter over bed: 600 mm Godpfx Afovvtpxeqett Swing diameter over cross slide: 540 mm Turning length: 550 mm Z-axis travel: 800 mm X-axis travel: 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1000 rpm Tool turret – number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions approx. LxWxH: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features a C-AXIS, E-axis, Y-axis, and W-axis Driven tools can be used at all turret stations Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooler With hinge belt chip conveyor Chip tray Compressed air gun Machine is offered WITHOUT chuck as shown!

Stanje: rabljeno, Leto izdelave: 2007, Tehnični podatki: Premer struženja: 220 mm Dolžina struženja: 310 mm Skupna priključna moč: 17 kW Teža stroja pribl.: 3,3 t Prostorska zahteva pribl.: 2,25 x 1,63 x 1,94 m Premer vrtenja nad posteljo: 430 mm Premer prehoda skozi vreteno: 45 mm Razdalja med konicama: 687 mm Premik sani radialno (os X): 160 mm Premik sani aksialno (os Z): 310 mm Gedpfx Afsx Aq Hwoqott Obrati vretena: 0-6.300 min⁻¹

Stanje: rabljeno, Leto izdelave: 1990, Technical details: X travel: 185 mm Y travel: 95 mm Z travel: 200 mm Control: emco tronic TM02 Gtjdpfx Aovc Awrjfqet Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate stepless: 1 - 2000 mm/min Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: R 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Control panel: EMCOTRONIC TM 02 Operating modes: Manual operation and/or automatic Coolant system (with supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard