Emco Bs 3 nakup rabljenega (146)

Stanje: rabljeno, Leto izdelave: 1990, premer struženja nad prečnim suportom: 210 mm, izvrtina vretena: 31 mm, premer struženja: 320 mm, višina središča: 165 mm, The machine can be tested under power and is fully functional. Ihedewpkd Sspfx Af Tet Includes accessories. Collet equipment is included.

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder Ihedpfx Afevwgpbj Tot - Assorted tool holders

Stanje: rabljeno, Leto izdelave: 2017, Emcomat E300 naprodaj. Stroj je letnik 2017. Tip stroja: EM300x1500 SIEM Iedpfx Aow I S Uusf Tsht Nekatere popravila so bila opravljena in naslednje napake so nam znane: Geometrija je bila preverjena. Z-vodila na območju glavnega vretena (vpenjalna glava) so nekoliko obrabljena. Z-vlečnik se pri obremenitvi nagiba v X in Y- za do 0,1 mm, kar pomeni, da natančno delo v tem območju pri večjem vpenjalnem tlaku ni več možno. Revolver za orodja je bil pregledan in nastavljen. Jermen osi X je bil zamenjan in ničelna točka stroja nastavljena. Avtomatsko pasovno mazanje, izguba olja – iskanje napake – problem rešen, mazalna cev zamenjana. Stroj deluje – s pridržkom za Z-os vodila.

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Pomik X/Z: 210mm/610mm, pomik Y: +/-40mm, premer vrtenja nad prečnim suportom: 360mm, prehod vretena: 65mm, število orodnih mest: 12, držalo orodja: VDI30, hitrost vrtenja: 4000 obr/min, hitri pomik: 24m/min, sila podajanja: 5000Nm. Dimenzije stroja X/Y/Z: pribl. 4000mm/2500mm/2500mm, masa: pribl. 6000kg, krmiljenje: Siemens Sinumerik 810D, delovne ure: 4894h. Vključuje oljni hladilnik, zbiralnik delov, samostiskalno vpenjalno glavo Kitagawa BB08, napravo za vpenjanje s penastimi pušami, držala za stružne rezila in držala za vrtalne palice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Ijdpfxjxuvn Dj Af Teht

Leto izdelave: 1992, Stanje: novo,

Leto izdelave: 1998, Stanje: novo,

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6CQ2401, premer struženja nad prečnim suportom: 360 mm, izvrtina vretena: 65 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 610 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis as rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Spindle outside diameter front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and Workpiece Dimensions Distance main spindle – tailstock: 805 mm Distance main spindle – sub spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Sub Spindle / Tailstock Inner taper sub spindle/tailstock: MT4 Tailstock quill travel: 500 mm Max. thrust force: 8,000 Nm Feed and Rapid Traverse Feed force X-/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Ijdpfxswu Ecgs Af Tjht Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool Carrier Tool turret: 12-position Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0 – 4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK 3-jaw chuck with 220 mm diameter - Tailstock included - Machine is suitable for transport on a standard commercial truck

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Premer kroženja nad ležiščem/prečnim suportom: 430mm/210mm, razdalja med konicama: 510mm, hod X/Z: 160mm/310mm, hitrost vretena: 6300vrt/min, hitri pomik: 20m/min, število orodnih postaj: 12, vpenjanje orodja: VDI30. Dimenzije stroja X/Y/Z: ca. 2250mm/2000mm/2000mm, teža: ca. 2600kg, krmilje: Fanuc Series 21-T, delovne ure: ca. 40000h. Števec ur se je ob vsakem servisu ponastavil. Stroj ima elektronske težave, ki povzročajo občasne sistemske izpade. Ogled na lokaciji je mogoč. Ihodpfxoxmkcao Af Tst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R2AP3901, stružna dolžina: 700 mm, premer struženja: 220 mm, potovalna razdalja osi X: 160 mm, pomik po osi Z: 310 mm, največja hitrost vrtenja: 6.300 obr/min, skupna višina: 1.940 mm, skupna dolžina: 1.980 mm, skupna širina: 2.630 mm, TECHNICAL DETAILS Working Area Swing diameter over bed: Ø430 mm Distance between centers with standard tailstock: 700 mm Maximum turning diameter: Ø220 mm Maximum workpiece length: 510 mm Maximum bar capacity: Ø45 mm Cross slide travel X: 160 mm Longitudinal slide travel Z with manual tailstock: 310 mm Main Spindle Spindle mount per DIN 55026: A5 Spindle nose diameter at front bearing: Ø80 mm Solid clamping cylinder with drawbar for chuck parts up to: Ø165 mm Hollow clamping cylinder with draw tube, max. bar capacity: Ø45 mm Max. chuck size: Ø160 mm Main Spindle Drive AC motor, power rating (100% / 40% duty cycle) with integrated holding brake: 9 / 13 kW Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Rotary axis resolution: 0.001° Rapid traverse: 100 rpm Feed Drives AC motors on X and Z axis, feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position deviation Ps as per VDI 3441 in X/Z: 3 / 5 µm Tool System Disc turret with directional logic Ihsdowxw Aaopfx Af Tjt Tool holders per DIN 69880: VDI 30 Tool shank section for square tools: 20 x 20 mm Boring bar shank diameter: Ø32 mm Number of tool stations: 12 Turret indexing time: 0.14 s Standard Tailstock Travel: 460 mm Quill stroke: 120 mm Quill diameter: Ø60 mm Internal taper for live center: MT4 Quill thrust: 5,000 N MACHINE DETAILS Footprint: 2.63 m x 1.98 m x 1.94 m Space requirement: 3.0 x 1.92 m Height: 1.88 m Weight: 3.8 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6AN3701, stružna dolžina: 520 mm, premer struženja: 360 mm, potovalna razdalja osi X: 210 mm, pomik po osi Z: 610 mm, največja hitrost vrtenja: 6.300 obr/min, skupna višina: 1.872 mm, skupna dolžina: 1.941 mm, skupna širina: 3.074 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, TECHNICAL DETAILS Working Area Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Slide travel X/Z: 210 / 610 mm Distance main spindle–tailstock: 805 mm Max. workpiece size with tailstock: Ø160 x 520 mm Iedpfxswxw H Se Af Tsht Main Spindle Spindle nose to DIN 55026: A5 Spindle outer diameter at front bearing: Ø80 mm Solid clamping cylinder with draw bar for chuck parts up to: Ø160 mm Hollow clamping cylinder with draw tube, max. bar capacity: Ø45.5 mm Max. chuck size (spindle size Ø45): Ø160 mm Tailstock Internal taper: MT4 Tailstock travel: 500 mm Max. thrust force (hydraulically controlled): 8,000 N Feed Drives Feed force X/Z: 5,000 / 7,000 N Rapid traverse speed X/Z: 24 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning accuracy X/Z/Z₂: 3 / 5 / 4 µm Main Spindle Drive AC motor power 100/40% duty cycle: 9 / 13 kW Speed range (infinitely variable): 0-6,300 rpm Max. torque: 89 Nm MACHINE DETAILS Dimensions (WxDxH): 3074 mm x 1941 mm x 1872 mm

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Naprodaj je CNC stružniški center EMCO Turn 325-II (2005) Stanje: dobro, tehnično brezhiben. Proizvajalec: EMCO Maier GmbH (Avstrija) Model: Turn 325-II Leto izdelave: 2005 Kompakten in zanesljiv CNC stružniški center, namenjen obdelavi različnih kovinskih kosov, rezanju navojev in rezkanju v majhnih ter srednje velikih serijah. Ihodpexp Iyhsfx Af Tjt Glavne tehnične specifikacije: (podatki po specifikaciji modela Emco Turn 325-II) Krmiljenje: Siemens Maks. premer struženja: 250 mm Maks. dolžina struženja: 500 mm Hitrost vretena: do 5000 obr./min Revolver glava: 12 pozicij (avtomatski menjalec orodij) Maks. dolžina orodja: 100 mm Moč motorja: cca 15 kW Hlajenje: integriran hladilni sistem Napajanje: 400 V / 50 Hz Teža stroja: pribl. 3500 kg Za dodatna vprašanja smo vam z veseljem na voljo.

Stanje: zelo dobro (rabljeno), EMCO TURN 365 – CNC Turning Center For sale is an EMCO TURN 365 CNC turning center in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 Model: EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum part length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose - tailstock center) [mm]: 669 Ijdpfx Aexiy Ukof Teht X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor, power (Sinumerik/Fanuc) with integrated holding brake [kW]: 24.4 / 22 Infinitely variable speed range [rpm]: 60 - 3200 Maximum torque (Sinumerik/Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Maximum tailstock force [N]: 8000 Traverse speed [m/min]: approx. 20 Tailstock quill internal taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders to DIN 69880 VDI 30 Tool section for square tools [mm]: 20 × 20 Boring bar shank diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 - 5000 Maximum drive power [kW]: 5 Maximum torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4000 kg • Installation dimensions (L × W × H): approx. 4000 × 2000 × 2000 mm — Condition & Scope of delivery — The machine is in very well-maintained condition. The offer includes comprehensive documentation incl. operating manual. • Inspection possible anytime • Free loading onto truck • Delivery by arrangement possible — Contact — Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT; subject to change and errors excepted.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 17.300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Q4A124301, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 20, TEHNIČNI PODATKI Delovno območje Pomik X-os: 350 mm Pomik Y-os: 250 mm Pomik Z-os: 300 mm Min. razdalja med čelom vretena in mizo: 120 mm Maks. razdalja med čelom vretena in mizo: 420 mm Miza Vpenjalna površina: 500 x 300 mm T-utori (število / dimenzija / razmak): 5x 45x100 mm Največja obremenitev mize: 100 kg Višina mize od tal: 880 mm Vreteno Območje vrtljajev: 50 – 10.000 min⁻¹ Moč motorja vretena (S6): 8,5 kW Vrtljivi moment vretena (S6): 41 Nm Vpenjalo orodja: ISO 30 Menjava orodja Število orodnih postaj: 20 Največji premer orodja: 63 mm (brez sosednjih orodij) Največja dolžina orodja: 200 mm Iodpfexa Araex Af Tsht Največja teža orodja: 5 kg Čas menjave orodja: 2,5 s PODROBNOSTI O STROJU Dimenzije & teža Mere stroja (D x Š x V): 1.600 x 1.700 x 1.980 mm Teža: 1.970 kg Priključna moč: 9 kVA Obratovalne ure: 17.300 h OPREMA 30 vpenjal 2 Gressel primeža Opomba: Stroj bo priključen na elektriko do 21.09.2025.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6AP3801, stružna dolžina: 600 mm, premer struženja: 360 mm, model krmilnika: Siemens CNC 840 D, TECHNICAL DETAILS Swing diameter: 360 mm Turning length: 600 mm Control: Siemens CNC 840 D MACHINE DETAILS Ijdpsw Em A Ajfx Af Tjht Operating voltage: 400 V~ Phases: 3/PE Frequency: 50/60 Hz Maximum current: 48 A Rated current: 36 A Short-circuit current (Ik): 6 kA EQUIPMENT - Twin-spindle

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel Ijdpsx E Dncjfx Af Teht EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7A V09, izvrtina vretena: 65 mm, prehod palice: 65 mm, Prodamo dva obdelovalna centra CNC EMCO HYPERTURN 665, letnik 2005, skupaj s podajalcem palic. Iedpfx Afeyahile Tsht Stružnici z dvema revolverjema (oba imata gnana orodja) in nasprotnim vretenom. Izvrtina skozi vreteno fi65. Z res veliko dodatne opreme (glave, gnana orodja...). Stroja sta redno vzrževana in sta v dobrem stanju. Cena stroja s podajalcem FMB je 23.000€. Cena stroja s podajalcem Hydrobar je 20.000€. V primeru nakupa obeh je skupna cena 40.000€

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R7 A-Q-2701, Rabljeni CNC stružnica Znamka: EMCO Model: Hyperturn 665 Iodsx Tbcyspfx Af Toht Leto izdelave: 2002 Krmiljenje: 840 D S transportnim trakom za odrezke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: Ihedpfx Aexzq Ncef Tot - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: novo, Machine according to DIN 8605: precision lathe with increased accuracy. Centre distance: 700 mm Centre height: 170 mm Swing diameter over bed: Ø 340 mm Swing diameter over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Saddle guide length: 380 mm Tool cross-section: 20x20 mm Distance from turning centre to top slide: 34 mm Top slide (compound rest) swivel range: 60/120° Ihjdpfodctnbsx Af Tot Main spindle: Spindle mount DIN 55029 (Camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 rpm Speed control: stepless Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard): 0.4 - 7.0 mm 32 imperial threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Quill diameter: Ø 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights: Between centres: 50 kg With tailstock support: 150 kg Additional basic equipment (standard accessories): Including machine stand and integrated 3-axis digital display, German, with colour display 1 longitudinal stop 1 dead centre, taper 1:22, DIN 7178 1 dead centre MT3 1 chuck key 1 wrench component 1 grease gun 3 hexagon bolts M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 single tool holder 1 A13x17 wrench DIN 837 1 open-end spanner SW 19 1 open-end spanner SW 22 1 hex key SW 5 1 hex key SW 6 1 hex key SW 8 3 shear pins 1 E-box key 1 operating manual incl. spare parts list 1 electrical documentation 1 test certificate Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Pictures may show special equipment and accessories!

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Isdpfxow Tg Ade Af Tsht Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Uporaba Kovina Tip izdelka Stružnice Način delovanja Ročni Serijska številka 8303059 Največje število vrtljajev vretena 2200 vrt./min. Znamka Emco Zahtevana moč (kW) Ijdpfxoyalhxe Af Tjht 1,4 Država in regija proizvodnje Avstrija Vir energije Električni Tip upravljanja Konvencionalno Teža stroja (kg) 300 Model/Tip Maximat Super 11 Leto izdelave 1983

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.550 h, Funkcionalnost: popolnoma funkcionalen, S kratkim podajalcem palic EMCO SL 1200 ponuja EMCO popolno rešitev za samodejno potiskanje in dosipanje odrezanih palic do največje dolžine 1200 mm. Prednost: majhna postavitvena površina in krajši časi nalaganja zaradi krajših hodov. Krmiljenje je popolnoma prilagojeno vmesniku stroja. - Samodejno potiskanje in dosipanje odrezanih palic - Največja dolžina palice: 1200 mm - Kompaktna zasnova za majhno postavitveno površino - Kratek čas nalaganja zaradi kratkih hodov - Krmiljenje popolnoma prilagojeno vmesniku stroja Tehnične lastnosti / specifikacije: - Tip izdelka: kratki podajalec palic - Model: SL 1200 - Proizvajalec: EMCO - Največja dolžina palice: 1200 mm Ijdpfjyabuzjx Af Toht

Leto izdelave: 2007, obratovalne ure: 8.500 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical Machining Center Emco FAMUP MCX 750-1200 with IKZ 40 bar Year of manufacture: 2007 Control: Fanuc 21i Operating hours: 8,500 h Chip Blaster high-pressure system - Max. spindle speed 8,000 rpm - Tool magazine with 24 stations (ISO 40) - Tool holder ISO 40 – 24 ISO 40 pull studs - Standard paintwork: red – grey – black - Spindle prepared for high-pressure cooling (connection A) - Tapping without floating holder - Central lubrication system Ihjdpfsh Akhkjx Af Tot - Chip removal from the enclosure via flushing device - Rinse gun for cleaning work area, clamping devices, parts - Coolant unit with 3 adjustable nozzles - Coolant tank 500 l - Spindle air blast device for cleaning the taper during tool change - Work area illumination via 24 V halogen lamp - Two-color warning light TECHNICAL DATA MCX 750 X-axis travel: 750 mm Y-axis travel: 500 mm WORKING RANGE Z-axis travel: 640 mm Clamping surface: 900 x 520 mm T-slots: number, width, spacing: 5x18x100 mm Max. table load: 400 kg TABLE Distance table top – floor: 925 mm Speed range: 50 – 8,000 rpm Spindle motor power: 13/9 kW Tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive: belt drive Rapid traverse X,Y,Z: 24 m/min Feed rate X,Y,Z: 20 m/min AXIS DATA Axis acceleration (X,Y,Z): 0.25 G Unidirectional positioning accuracy over entire XYZ range: ±8 µm Unidirectional repeatability X, Y, Z: ±8 µm PRECISION Reversal play: 5 µm* Number of tool stations: 24 Tool selection: random Max. tool diameter with (without) adjacent tools: Ø 75 (150) mm Max. tool length: 250 mm Max. tool weight: 6 kg TOOL CHANGE Tool change time (tool/tool): 1.5 s Connected load: 20 kVA Dimensions LxWxH: 2,650 x 2,400 x 3,050 mm Weight: 5.5 t

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica Emco Super 11 CD. 380V, 3-stopenjski in 2-stopenjski motor, gladko delovanje. Pogon vretena s menjalnikom, zobniki delujejo v oljni kopeli. 8 hitrosti vretena nastavljivih od 55 do 2200 obr/min. Norton menjalnik za enostavno rezanje navojev. Avtomatski vzdolžni in prečni pomik. Konjiček MK2. Črpalka za hlajenje nameščena na zadnji strani osnovne omarice. Zaščitni pokrov vpenjala. Hitromenjalni nosilec orodja. Razdalja med konicami: 650 mm. Višina konic: 140 mm. Premer vretena: 35 mm. Ihjdpfxsyalrkj Af Tet

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 29.849 h, Funkcionalnost: popolnoma funkcionalen, The Emco Maxxturn45 SYM is in good condition and is still in daily operation. The machine is primarily used for small-batch production. Six months ago, the machine control panel with display and the air conditioning unit were renewed. Last service was performed in 09/2025, and the machine geometry was measured. The machine can be inspected in production until calendar week 4/2026. Technical data: - Control: Siemens 840 D - Machine is equipped with a Y-axis - Main spindle speed: 6,300 rpm - Counter spindle speed: 6,300 rpm - Max. spindle bore: 45 mm - 2 x C-axis, 0.001° - High-pressure coolant system at the tool turret - Chip flushing for counter spindle - Sauter tool turret with 12 stations, VDI25 - All stations prepared for driven tools - Speed range for driven tools: 6,000 rpm - Travel in X/Z/Y axes: 160/510/+40/-30 mm Accessories: - Knoll chip conveyor - 2 x Hainbuch collet chucks for SK52 collets - High-pressure coolant pump - Finished parts catcher - Interface for bar loader - New control cabinet air conditioning unit - LED signal lamp, 4 wedge clamps, machine documentation Iedpfxox Tu Rqj Af Teht - Machine keyboard with cover - 8 static tool holders VDI 25 - 2 x axial driven tools - 1 x radial driven tool Please note: The tools shown in the pictures are not included in the scope of delivery.