CNC stroj za vrezovanje okenskih profilov

Weinig Univar 10

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 Tjdpfxofzzhye Abgjf - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Tjdpstq U A Ijfx Abgjf

Stanje: rabljeno, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Profile Reworking Machine ----- For re-profiling of windows, doors, and similar items featuring asymmetrical perimeter profiles. Suitable for timber thicknesses from 68 to 92 mm. Processing time per frame re-profiling for a medium size (1.20 x 1.20 m) – approx. 2 min. Available tool positions can be selected via the operator control panel. The machine is equipped with three hydraulically controlled right-side precision lifting spindles, designed to accommodate three tool sets, each spindle providing 2 x 95 mm vertical spindle stroke. The spindle stroke is performed in a U-motion, enabling minimal opening in the milling fence when processing short parts. Spindle stroke can be finely adjusted horizontally for both tool positions from the operator side. Centralized lubrication for spindle units. For tear-free re-profiling of window sashes or frames and doors, the first spindle can be selected for clockwise or counterclockwise rotation. At each of the last 100 mm at the end of a frame, this spindle with the corresponding climb-cutting tool plunges into the passing timber. This prevents tear-out caused by the following counter-rotating milling spindle. The first seven transport rollers can be lifted via foot pedal, shortening the throughput time. An additional support rail permits re-profiling of large-format frames as well. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height is electronically measured and displayed. Electrical design according to VDE standards. Machine is supplied with operation tools, but without machining tools. Technical data: Tjdpfxevnv Uue Abgsf Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1st Profile Spindle (climb and counter-rotation) ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm With automatic climb-cutting plunge mechanism 2nd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 3rd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 4th Profile Spindle – Fitting (hardware) unit, right ----- For machining the hardware groove during the re-profiling pass or for grooving along the longitudinal profile. Pneumatic horizontal movement with selector switch at the operator control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm (for 2 tools) Tool cutting circle min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Stanje: rabljeno, For profiling and rebating windows, doors, individual components, and similar workpieces with continuous profiles. Tsdpfxjvnab Se Abgjf Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, feed synchronization unit 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW 4. Profile milling unit, horizontal bottom, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW Rebating carriage for narrow and short sashes, PC control system Nexus.

Stanje: dober (rabljeno), Multiblade Saw Gabbiani SA 300 – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8-56 m/min disc diameter: 300 mm Todpfshcwrkjx Abgef spindle diameter: 50 mm sleeve diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of kickback pawls height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), I am selling the complete window manufacturing profiling line: 1 pc. 5-spindle four-sided planer with saw, Weinig Unimat 23EL - without HESS sanding machine – alternative replacement machine negotiable 2 pcs. tenoning and slotting machines, Weinig Unitec 10 2 pcs. profiling and rebate automation centers, Weinig Univar 10 1 pc. CNC dowel drilling machine, KOCH WinDoor - Set of complete Weinig automation infeed and conveyors Todpofzzidofx Abgef Year of manufacture: 1997. Milling heads: OERTLI. Available immediately. Already dismantled and placed on original pallets. Condition: very good!

Stanje: rabljeno, WEINIG UNIVAR 10 frame turning device, offered as a source of spare parts from a UC-Matic window production line. Tedpfx Aolf H Sqjbgsf - Year of manufacture: 1997 - Sütron BT20 control system - Machine incomplete - Further details available on request - Image for illustration purposes only.

Stanje: dober (rabljeno), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6 – 36 m/min, spindle arrangement: 1-bottom (5.5 kW) 2-right (5.5 kW) 3-left (5.5 kW) 4-right (5.5 kW) 5-top (11 kW) Tsdpfx Aopq T Rbebgjf 6-bottom (5.5 kW) 7-top (7.5 kW) 8-bottom (37 kW) 9-universal (11 kW) 5 powered rollers in the table

Stanje: rabljeno, for profiling and rebating windows, doors, individual parts, and similar components with circumferential profiles, including return conveyor Units: Todpfx Aslf H Suebgsf 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Stanje: rabljeno, For profiling and trimming windows, doors, individual components, and similar items with continuous profiles, including mechanization for single-person operation. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, co-direction drive system. 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic. 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW. 4. Profile milling unit, horizontal below, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW. Todpfx Abelf H S Aegjf Trimming carriage for narrow and short sashes, PC control Nexus.

Stanje: rabljeno, Leto izdelave: 1996, Dolžina vozička: 2800 mm Eloksirana izvedba (nov voziček) Motor 7,5 kW Samodejno krmiljenje s kontaktorjem Digitalni prikaz števila vrtljajev Širina reza 1000 mm Podaljšek mize 800 mm Brez podajalnika!!! Skladišče: Nattheim Tsdpfx Asw Sy Tgobgsf