Dvojne kotne žage za izdelavo lesenih oken nakup rabljenega (13)

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 219937, skupna dolžina: 6.500 mm, skupna širina: 1.600 mm, skupna višina: 2.000 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, skupna masa: 1.200 kg, Dvostranska žaga Futura se uporablja za prečno rezanje lesa in aluminija. Rezne glave in žagine plošče so nastavljive, kar omogoča poševne reze. Te stroje se je še posebej koristno uporabljati v vseh vrstah proizvodnih obratov. Dvostranska žaga Futura se uporablja za prečno rezanje lesa. Rezne glave in žagine plošče so nastavljive, kar omogoča poševne reze. Te stroje se je še posebej koristno uporabljati v vseh vrstah proizvodnih obratov. Maks. premer žagine plošče: 450 mm Premer vretena: 40 mm Dkedozvcp Rspfx Anuju Zaščitni elementi: 2 kosa Pnevmatični pomik žagine plošče Rezne glave so nastavljive pod kotom 45° Min. dolžina reza pri 90°: 240 mm Maksimalna dolžina reza pri 90°: 5000 mm Širina reza: 130 mm Globina reza pri 90°: 200 mm

Stanje: pripravljen za uporabo (rabljen), Dvoglava zamikalna žaga Haffner, tip 189, takoj na voljo. Tehnični podatki: Premer žaginega lista 330 mm, maksimalna razdalja med žagami pri 90° 3.330 mm, višina reza pri 90° 90 mm, širina reza 220 mm, višina reza pri 45° 40 mm, minimalna razdalja med žagami pri 90° 360 mm. Žagini listi se lahko nagnejo do 45°, vmesna podpora, agregati za žago so vrtljivi, žagini listi nagibni, pnevmatski vpenjalnik, izvedba zgoraj rezalna, širina nastavljiva ročno, teža cca 380 kg, potrebni prostor dolžina 1,2 m, širina 3,8 m. Stroj je v tehnično brezhibnem stanju in si ga je možno ogledati kadarkoli. Dostava po Nemčiji možna s špedicijo. Za vprašanja pokličite ali pišite. Maschinenhandel Nord, Gerstenstraße 2, 17034 Neubrandenburg. Vse cene so neto, DDV ni vključen – napake pridržane. Dkodpfx Ajxk Tvksnueu

Stanje: dober (rabljeno), Double Mitre Saw Rapid DGS – Used, Fully Functional, Ready for Demonstration For sale is a Rapid double mitre saw DGS in fully functional, well-maintained used condition. The machine is immediately operational and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Precision double mitre saw for aluminium, plastic, and, if required, light metal profiles Stable, robust construction Mitre cuts possible (both saw heads adjustable) Clean, technically flawless used condition Cutting length: 4 m Saw blade: 3700x3.6/3.0x30 Z=108TF negative Dimensions (LxWxH): 5 m x 1.20 m x 1.50 m Dsdpfxexzdvis Anusku Angle/degree: 45-90° Condition: The machine is in full working order. All functions can be tested live during inspection. Inspection & Collection: An inspection by appointment is possible. Collection by the buyer – loading assistance available if required; crane and forklift present. Price: Negotiable If interested or if you have any further questions, feel free to contact us!

Stanje: rabljeno, Leto izdelave: 2003, rabljeno, dobro ohranjeno Stroj očiščen, podmazan, delno obnovljen. Razni obrabni deli zamenjani Preizkusno delovanje z nastavitvami Proizvajalec Rapid Tip DGS 200 Leto izdelave 2003 Tovarniška št. 404 CE tipno preverjeno Motorja 2 x 2,2 kW Širina reza 4000 mm Globina reza 130 x 140 - 100 x 230 - 60 x 270 mm Največja višina reza 280 x 50 mm Največji premer lista 420 mm Ročno nastavljivo do 45° Linearen podajalnik pnevmatski Digitalni prikaz rezi dolžine Dsdpfx Anoyclxpoujku 4 x pnevmatska pritrditev obdelovanca - 2 x horizontalno, 2 x vertikalno Horizontalni cilindri 2 Vertikalni cilindri 2 Potrebna površina cca 5100 mm x 1180 mm x 1280 mm Teža cca 800 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 3.000 mm, premer žaginega lista: 350 mm, zračni tlak: 6 letvica, dolžina odseka (min.): 50 mm, HECHT dvojna krožna žaga Exenso DS350E – 3000 mm za lesene, steklene, profilne letve, aluminijaste letve itd. Številka artikla 942.5103, 1 kos, HECHT Exenso DS350E - Dolžina reza 3000 mm - Območje nagiba 22,5° (notranje) do 135° (zunanje) - Desna glava je nastavljiva - Premer lista žage 350 mm - Vključno z 1 kosom sredinske opore. - Pritrditev komponent s pnevmatičnim sistemom. - Nadzorna plošča Exenso DS3 s 15-palčnim zaslonom na dotik v ohišju monitorja, ki je zaščiten pred prahom. - 3-osno upravljanje, 1 vzdolžna os in 2 nagibni osi. - Vnos podatkov o rezu ročno - Obdelava podatkov iz seznama rezanja (nabor podatkov po specifikaciji) - Obdelava podatkov iz merilne letve (brezžični merilnik GMF) - Ethernet priključek 10/100 (TCP/IP) - USB vmesnik - Vključno z nadzorno omarico, motorjem in licenčami programske opreme. Številka artikla 942.5203, 1 x hidropnevmatični pogonski sistem DS Številka artikla 723.0121, 2 x list žage DS za les Poševni/nagibni/ravni zob - pozitivni - Številka artikla 942.5236, 2 x kombinirani sistem vpenjanja obdelovanca DS (4 x horizontalni, 4 x vertikalni vpenjalni elementi) Kombinirani sistem vpenjanja obdelovanca, ki je sestavljen iz: - Pnevmatični nagibni vpenjalnik – za vpenjanje materiala od zgoraj. (Prost dostop do delovne mize) - Horizontalni pnevmatični vpenjalnik – vpenjalni valj, ki je odporen na torzijo, z pritiskalnikom. Vpenjalniki se lahko posamično izbirajo prek nadzorne plošče žage. Sekvenca vpenjanja se lahko tudi nastavi prek nadzorne plošče. Vključno z varnostnim predvpenjalnim tlakom. Obseg dobave pri 2 kompletih: - 2 kosa (leva/desna) vertikalnih nagibnih vpenjalnikov. - 2 kosa (leva/desna) horizontalnih vpenjalnikov. Številka artikla 942.5241, 1 komplet DS350, podpora za mizo z utori (standardni utor), posebni utori po skici stranke na zahtevo! - Dokumentacija: 1 x v nemščini ali v lokalnem jeziku - Številka artikla 945.2007, embalaža DS350 (transportna konstrukcija) - Številka artikla 944.1023, GMF merilni posnetek 3000 mm, popoln komplet (1500 mm plus podaljšek 1500 mm), vključno z napajalnikom in sprejemnikom. Robustna aluminijasta merilna letev z merilnim obsegom 3000 mm je idealna za merjenje steklenih letev. Način delovanja: Za uporabo na vratih in velikih okenskih krilih je mogoče merilni posnetek GMF varno in hitro mehansko podaljšati do dolžine 3000 mm. Osnovna dolžina: 1500 mm Dedpezr Uu Rofx Anujku Podaljšek: 1500 mm, samodejno zaznavanje in izračun.

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Tiltable: yes Rapid DGL 200 M Double Miter Saw ----- with 500 mm saw blade diameter, manual length adjustment with digital length display, pneumatic angle adjustment for 45° and 90°, intermediate angles can be set manually using the scale. Easy operation and highest quality ----- For precise and burr-free cutting of aluminum, plastic, and wood profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely robust machine bed - Complete encasement of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Edit the 30 profile numbers (name + correction) directly in the display - The correction is factored in based on the saw’s angle position (45° and 90°) - Piece counter: if the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: converts length and profile height based on the angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-Alu - Aluminum - Wood, wood-aluminium Perfect precision in dimension and angles guaranteed. ----- We use precise and efficient movement technology for this: Linear ball bearings for length adjustment, spring-loaded pivot units for easy and safe angle adjustment between 45° and 90°. Both length and angle adjustments on this double-head miter saw are manual. Greater convenience and higher performance can be achieved with the digital length display and pneumatic tilting unit. With 500 mm saw blades, a wide range of profile systems can be processed. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5,250/1,420/1,900 mm Weight: 1,260 kg Options ----- - Hydropneumatic feed - Spray system - Stop for short parts - Rubber-coated vertical clamps - Vertical clamps with support plate for profile-dependent parts - Gasket clamping device - Digital length display Dkedpfxexmk Aao Anuou - External fixed and centrally movable profile supports - Roller supports at the movable or fixed saw unit - Chip extraction system (Technical data as per manufacturer – subject to change/errors excepted!)

Stanje: dober (rabljeno), Leto izdelave: 1997, Double mitre saw RAPID DGS 200 Year of manufacture: 1997 Drive: 2 x 2.2 kW, 400 V Dodshctt Eepfx Anujku Swivel range: manual, 45° to 90° Saw blade diameter: 420 mm Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment: manual Digital length display Air pressure: 7 bar Profile support: fixed external support, movable central support Dimensions (L/W/H): 5200/1200/1500 mm Weight: 800 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4150 x 1200 x 1650 mm Weight: 450 kg Total power requirement: 1.5 kW Double Mitre Saw WEGOMA DS110S Technical Data: - Working length: 3300 mm - Left head fixed - Hydropneumatic saw feed - Heads can rotate left and right - Mitre angles from 90° to 45°, suitable for compound cuts - Positioning via scale with clamping device - Air blow gun - Includes 2 carbide saw blades 400 x 30 mm Dkodpfxsvz Ezwe Anuju - Motor: 1.5 kW - Voltage: 400V, 3~, 50Hz - Saw blade diameter: 400 x 30 mm - Saw blade speed: 3800 rpm - Min. cutting length: 500 mm - Max. cutting length: 3200 mm - Profile width/height at 45°: 140 x 120 mm - Profile width/height at 90°: 200 x 120 mm - Air connection: 6-8 bar - Size (LWH): 3900 x 1200 x 1650 mm - Weight: 550 kg Features: - Left saw head fixed; right saw head moves smoothly along precision ball bearings on hardened and polished shafts - User-friendly operation: Elgo digital display for position monitoring - Fine length adjustment for the right head and clamping units - Manual setting of saw head to 45°/90°/135°, locking by safety pins - Two-hand safety operation - Hydropneumatic saw blade feed - Pneumatic vertical clamping device - Pneumatic horizontal clamping device for stable sawing - Controller for cut lengths up to 3200 mm - Support for double profiles - Intermediate angles set manually via the angle scale on the table and secured by safety pin - Cooling spray system for aluminium workpieces - Suitable for large profiles – maximum width 200 mm Option: Digital Display DZ-FAHR on movable head EUR 1,440,-

Stanje: novo, Delovna dolžina 3350 mm Delovna višina pri 90° = 180 mm Dodpfx Asy I Dclenujku Zasukljivo 45°/90°/45° 0 Višina reza pri 45° 140 mm Hecht Wegoma Dvojna potezna žaga DS 120 ----- Tehnični opis proizvajalca: Poz. 1: Dvojna potezna žaga DS120 Delovna dolžina 3350 mm Hidropnevmatski pomik žage, digitalni prikaz za merjenje dolžine, sredinski nosilec, zasuk 45°/90°/135°, 4 pnevmatski vpenjalni cilindri, 2 HM žagini listi Ø 420 x 30 mm ----- Cena navedenega stroja na zahtevo ----- (tehnični podatki po proizvajalcu – brez jamstva!) Vse navedene cene so neto. DDV po zakonu ni vključen.

Stanje: novo, Working length: 3,700 mm, 5,100 mm, 6,100 mm Working height: 160 mm Swivelling: yes Control: yes Rapid DGL 200 E Double Mitre Saw Dkedpsxmk Agjfx Anuou ----- with 500 mm saw blade diameter, electronic length and angle adjustment (45° and 90°, intermediate angles manually adjustable via scale) Precision cutting of profiles ----- For precise and burr-free cutting of aluminium, plastic, and wooden profiles. System features: ----- - Automatic length adjustment - Manual or electro-pneumatic angle adjustment 45°–90° - Saw blade Ø 500 mm - Extremely rigid machine bed - Complete enclosure of guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis supported on both sides Application examples: ----- Window, door, façade, conservatory, insect protection profiles; Partition wall systems; interior sliding door elements - PVC, PVC-Alu - Aluminium - Wood, wood-Alu Perfect dimensional and angular accuracy guaranteed. ----- With the double mitre saw DGL200E, we offer you a reliable quality product from our range of precision double mitre saws, so that you can supply your customers with flawless high-quality construction elements. Cutting lengths can be uploaded to the control system of this double-head mitre saw via network or USB connection, or entered manually via the keyboard. Special software solutions enable automatic positioning for cross cuts, overlengths or short dimensions, allowing processing of lengths outside the machine’s cutting range. An optimisation program with offcut management helps to minimise waste, thus reducing costs and ensuring sustainable use of valuable materials such as aluminium, plastic, or wood. A thermal label printer with dispenser, ergonomically positioned directly beneath the control terminal, enables efficient labelling of finished parts. Good and controlled offcut removal of the base machine can optionally be supplemented with a conveyor belt system. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° (up to 135° optional) Saw blade: 500 mm diameter Cutting lengths: 3,700 mm, 5,100 mm, 6,100 mm Profile clamping: 2 horizontal clamping cylinders; 2 vertical clamping cylinders (optional) Length adjustment: electronic Air pressure: 7 bar Dimensions: 5250/1420/1900 mm Weight: 1,260 kg Control ----- PCE 6000 Positioning and length cutting control PCE 6000 based on Windows 10 IOT for modern window manufacturing on RAPID double mitre saws. 128 GB SSD, 8 GB RAM, approx. 10 GB database for cutting programs and profile data. Standard equipment: - Single cut - Program cut - 2x USB interface - TFT screen - Graphical representation of profile cross-sections - Backlit display - Control display integrated in the two-hand control console Optional features at extra cost: - Offcut optimisation - Software stop for overlengths - Software stop for short parts - Cross-cutting function - Profile height measurement device - Label printer (standard label...

Stanje: novo, Working length: 355 - 4010 mm Working height at 90°: 290 mm Pivotable 45°/90°/45° Weight: 1800 kg Cutting height at 45°: 210 mm Hecht Wegoma Double Mitre Saw DS140 Universal double mitre saw for PVC, aluminium & wood ----- Manufacturer’s technical description: Item 1: Double Mitre Saw DS140 Working length: 4000 mm Hydropneumatic saw feed Pneumatic pivoting 45°/90°/45° 4 pneumatic clamping cylinders 2 carbide-tipped saw blades 500 x 80 mm Dkedpfjy I Db Uox Anuou Left saw head fixed, right saw head movable Item 2: Positioning Control EPS 220 for double mitre saws Includes EPS220 control for precise length positioning. With industrial 15-inch touch panel (dust and splash-proof) Display for manual or data record-based input of cutting data Data record integration: - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible - Interface to measuring tape incl. interface software Incl. control cabinet, motor, and software licenses - Short and long cut facility (activatable together with safety fence or mechanical stop) - Automatic cut (can only be activated in conjunction with entry protection via software) ----- Price for the above-mentioned machine on request! ----- (All technical specifications according to manufacturer – without obligation!) All prices quoted are net, plus statutory VAT.

Stanje: novo, Working length 4000, 5000 mm Working height 120 mm Tiltable: yes Rapid DGS 200 Double Mitre Saw ----- with saw blade diameter 420 mm, manual length adjustment with digital length display Perfect dimensional and angular accuracy guaranteed. We use precise and efficient drive technology for this: Linear ball bearing guides for length adjustment, spring-mounted tilting units for convenient and safe angle adjustment between 45° and 90°. Both length and angle adjustment on this double-head mitre saw are performed manually. Enhanced operator comfort and productivity can be achieved by means of the digital length display. System features: ----- - Manual length and angle adjustment - Saw blade Ø 420 mm - Robust welded frame construction - Ball-bearing linear guides with long service life - Hardened guide shafts - Electronically balanced saw blade flange - Direct-drive motor - Tilting axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and associated corrections - Edit the 30 profile numbers (name + correction) directly via the display - Correction calculated automatically according to saw angle (45° and 90°) - Piece counter: If the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: automatic conversion of length and profile height according to angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements Dkodpfx Aoxmk Amjnusu - PVC, PVC-aluminium - Aluminium - Wood, wood-aluminium Maximum precision thanks to twin-shaft guidance ----- With 420 mm saw blades, a wide range of aluminium or PVC profile systems can be processed. Simple operation, maximum precision, and reliability make the DGS200 particularly attractive for insect screen frame production in small batches. The DGS200 double mitre saw is also popular as an entry-level model for window manufacturing. In the woodworking sector, the saw is used for cutting a variety of strips in furniture construction and interior design. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Tilting range: manually adjustable 45° to 90° Saw blade: 420 mm diameter Cutting lengths: 4,000 mm, 5,000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5200 / 1200 / 1500 mm Weight: 800 kg (Technical data as per manufacturer – no guarantee!)

Stanje: novo, Working length: 355 - 4010 mm Working height at 90°: 315 mm Swivel range 45°/90°/45° Weight: 2050 kg Cutting height at 45°: 230 mm Hecht Wegoma Double Mitre Saw DS150 Universal double mitre saw for PVC, aluminium & wood ----- Technical manufacturer’s description: Item 1: DS 150 with 550 mm saw blade diameter hydropneumatic saw feed pneumatic swivel action 45°/90°/45° 2 carbide-tipped saw blades 550 x 80 mm Left head fixed, right head movable, prepared for positioning control. Item 2: Positioning control EPS 220 for Double Mitre Saws Including EPS220 control for precise length positioning. With 15-inch industrial touch panel (dust and splash-proof) Dedpfx Anjy I Dcfjujku Display for manual input of cutting data or via data set integration - 10/100 Ethernet connection (TCP/IP) - USB interface - Data transfer possible via USB or network - Interface for measuring bar incl. interface software Includes control cabinet, motor, and software licenses - Short and long cut facility (can be activated together with safety guard or mechanical stop) - Automatic cutting (can only be activated via software in combination with entry protection) Item 3: Positioning electronics for stepless automatic swiveling from 22.5°-135° With sensor query of actual position and dual-sided head clamping ----- Price of the above machine on request! ----- (Technical data as per manufacturer – subject to change!) All prices stated are net plus legal VAT.