Dvojna poševna žaga

HAFFNER DGS 189

Stanje: novo, Leto izdelave: 2025, The Automatic Basket Cleaning System XTON Smart Cleaner SC1000™ is constructed from stainless steel AISI 304 and acid-resistant stainless steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA fluid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contamination. The system operates in a closed loop at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to prevent rapid cooling of the cleaning fluid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, and safe, user-friendly operation. The cleaning system is designed for the automatic removal of contaminants from surfaces made of cast iron, aluminum, and steel. The design and construction of the Smart Cleaner SC1000™ meet the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 Kjdpju R Urhefx Af Tedg - Declaration of conformity: CE

Stanje: dober (rabljeno), Koda: 0323 Blagovna znamka: SML - ITALIJA Model: SILVER P 35/EL - CE standard Elektronska dvoglava kotna žaga za rezanje lesa, okvirjev, PVC, aluminija, plastike in različnih materialov – CE standard. Tehnični podatki: - Olio-pnevmatsko spuščanje žagine glave - Največja dolžina reza: 5200 mm - Najmanjša dolžina reza: 50 mm - Višina reza: 100 mm - Največja širina reza: 170 mm - Premer žaginega lista: 350 mm, izvrtina 30 mm - Motor: 3 KM vsak, 3000 vrt/min - Elektronski programator za pozicioniranje žagine glave - Bimanualni nadzor spuščanja žaginega lista Kedpotu Hy Eefx Af Todg - Pnevmatska pritrditev obdelovanca - 2 odsesovalna priključka, premer 60 mm - Obratovalni tlak: 7 bar - Skupne dimenzije (DxŠxV): 6300 x 1000 x 1600 mm - Teža: 1100 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, automatic fan baler after complete overhaul, automatic Kodpfxolnanwj Af Tsdg

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 11095150, IPG Laser GmbH Kjdpsrq D D Eefx Af Tjdg used 4kW laser source with chiller unit 400-460V AC 3-phase/PE 50/60 Hz 30.8A Year of manufacture: 2011 DWG number: G25-16-100920-2 Chiller unit: LC170.01-W3.5 Year of manufacture: 2010 3/PE - 400V 50Hz 21.8A 4 units available

Stanje: rabljeno, Leto izdelave: 1999, Jeklena konstrukcija, roke in vodila iz sive litine Montaža na 4 profilirana kolesca na vodilih premera 25 mm Žaga premera 350 mm, AL30 Višina reza 110 mm Kodpfxsppmtuo Af Todg Kapaciteta reza 680 mm Moč motorja 3 kW Izjemno ploski motor, 3000 vrtljajev/min Napetost 380V Nagib motorja v levo od 0° do 75° Ročno dviganje/spuščanje z vrtenjem ročice na sprednjem delu stroja Premer sesalnega priključka 120 mm Dimenzije: 180 cm x 170 cm x višina 160 cm Teža: približno 420 kg

Stanje: dober (rabljeno), Leto izdelave: 2017, Petrol-powered high-pressure cleaner in a tubular steel frame. Extremely robust. Ideal for construction sites without an available power supply. Fully operational. Equipped with a high-quality Honda engine. High-pressure hose and lance in excellent condition. Shipping within Germany possible. Transport costs approximately €110 plus VAT. The machine can be viewed and tested on site at any time. Technical data: Pressure: 150 bar Flow rate: 650 litres/hour Kdedpfok Dz R Tsx Af Tjg Weight: 39.5 kg Further information available in the attached datasheet.

Stanje: novo, Leto izdelave: 2025, Number of motors: 2 units Working length: 3000 mm Control system: Yes/CNC Loading dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Mitre Saw Exenso DS350E - 3000 mm For wooden glazing beads, muntins, profile strips, aluminium strips, etc. Pos. 1.1 Item no. 942.5103 1 unit HECHT Exenso DS350E - Working length: 3000 mm - Swivel range: 22.5° (internal) to 135° (external) - Movable right head Ksdpfxovzt D Ts Af Tjdg - Saw blade holder Ø 350 mm - Incl. 1 pc. centre support - Pneumatic clamping of the units - Positioning control Exenso DS3 with 15" touch panel display in a dust-protected monitor housing - 3-axis control: 1 longitudinal and 2 swivel axes - Manual input of cutting data - Processing of data from a cutting list (data set as specified) - Processing of measuring stick data (radio caliper GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licences Pos. 1.2 Item no. 723.0121 2 pcs. DS saw blade wood Bevel/Bevel/Flat tooth - Positive Pos. 1.3 Item no. 942.5236 2 sets DS combined workpiece clamping Combined clamping consisting of: Pneumatic swing clamp for clamping material from above (free access to the work table) Horizontal pneumatic clamp – anti-rotation clamping cylinder with pressure piece Clamps can be selected individually via the saw's control system Clamping sequence can also be set via control system Includes safety pre-clamping pressure Scope for 2 sets: - 2 pcs (left/right) vertical swing clamps - 2 pcs (left/right) horizontal clamps Pos. 1.4 Item no. 942.5997 DS feed unit pneumatic Pos. 1.5 Item no. 945.2007 DS350 packaging (transport frame) ----- Total price for this configuration ex-works – on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of offcuts when working with square-cut glazing beads instead of 2nd set Pos. 1.3 943.5236 DS combined clamping! Pos. 2.1 Item no. 942.5201 ES/DS front workpiece clamping - 2 pcs anti-rotation clamping cylinders - 2 pcs cylinder holder with clamping lever ----- For rebated glazing bead, instead of standard plates without groove: Pos. 2.2 Item no. 942.5241 DS350 grooved table supports to customer sample Mounted table supports are milled according to customer drawing Please send us all profile drawings to be cut (pdf, dxf and physical sample) ----- If, for example, aluminium is also to be cut: Pos. 2.3 Item no. 942.5203 DS feed unit hydropneumatic (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, subject to surcharge upon request: ----- Pos. 2.4 Item no. 942.5237 DS Software "Overlength" (subsequent steps must be confirmed) Sequence control incl. hardware. After entering a cutting dimension > max. cutting length of the machine, the cutting is carried out cyclically (left unit cuts, right unit moves material and cuts to size). ----- Pos. 2.5 Item no. 944.1023 GMF caliper 3000 mm complete set (1500 mm plus 1500 mm extension) Incl...

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0799336047, Elumatec dvoglava kotna žaga Kedpexf Dugefx Af Todg

Stanje: novo, Taylor 6/2,5 m vpenjalni nosilni sistem za spajanje masivnega lesa po robu in ploskvi. Vsestanska 6-delna vpenjalna naprava je posebej zasnovana za spajanje masivnega lesa po robu in ploskvi ter je idealna za proizvodnjo najrazličnejših komponent, kot so plošče, mizne površine, lepljeni bloki, mizarski elementi in deli stopnic. Patentirana "izenačevalna" vpenjalna roka vključuje več pomembnih lastnosti, ki jih pri drugih vrstah mehanskih vpenjalnih naprav ni najti in ki zagotavljajo visokokakovosten lepilni spoj. Stroj je standardno opremljen s pnevmatskim orodjem za zategovanje/spuščanje vpenjal, pnevmatskim izravnalnikom elementov in pnevmatskim pogonom za rotacijo. Na zahtevo je na voljo tudi z delovno širino 3,1 m in s 12 delovnimi sekcijami. 2,5 m (8,5 čevljev široka) 6-delna konstrukcija. 36 vpenjalnih rok tipa 302 z 90 mm (3,5") visokimi čeljustmi in maksimalnim odpiranjem 1015 mm (40"). (po 6 vpenjal na sekcijo). 1x pnevmatsko vpenjalno orodje tip 80U s funkcijo izravnave in gugalnim mehanizmom, upravljanje z gumbom. 1x pnevmatski motorni pogon tip 80AA za rotacijo. Prednji naslon – ročno upravljan. Pnevmatska krmilna palica za izbiro rotacije / smeri naprej-nazaj. Ksdpfx Afsdy Dtro Tsdg CE varnostne zaščitne ograje na straneh in zadaj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Ponudba – Dvoročna zajeralna žaga Emmegi Norma 400 Veseli smo, da vam lahko ponudimo Emmegi Norma 400 dvoročno zajeralno žago – natančen in zanesljiv stroj za profesionalno rezanje aluminijastih in PVC profilov. Tehnični podatki: Premer žaginega lista: Ø 400 mm Dolžina reza: do pribl. 4.000 mm, minimalna dolžina pribl. 485 mm Zasuk žagalnih glav: ± 45° (notri/zunaj) Pogon: hidropnevmatski pomik, moč motorja 2,2 kW na glavo, čas zaviranja pribl. 10 s Vpenjanje obdelovanca: pnevmatsko, horizontalno in vertikalno, z varnostno funkcijo „low pressure“ Kodpfx Afsw R T Tqo Tjdg Hlajenje: olje-voda mikro-megleni sistem