Stroj za rezkanje križnih spojev

STEGHERR KSF-mini

Stanje: delavnici obnovljeno (rabljeno), Število rezkalnih vreten: 2 kos. Prislon: da / ne Orodje: da STEGHERR tip KSF-mini, križna rezkalnica ----- Specialna rezkalnica za učinkovito izdelavo križnih spojk. Križna rezkalnica KSF-mini je rezultat dolgoletnih izkušenj podjetja STEGHERR pri izdelavi teh specialnih strojev za izdelavo križnih spojk. Z modelom KSF-mini lahko hitro in natančno izdelujete vse vrste križnih spojev, ki se pojavljajo v praksi. Obravnavati je mogoče tudi že profilirane letve. Natančna izrezava je omogočena, saj se obdelovanec vpne in obdela s treh strani v enem vpetju. Pogon orodja preko dveh trifaznih motorjev; vpenjanje obdelovancev je pnevmatsko. Bdsdpfezip Nwjx Aiqsh Profilni rezkar je prilagojen širini stega. Žagine liste za izdelavo utora je mogoče s pomočjo distančnih obročev nastaviti na mere profilnega rezkarja. Stroj je zasnovan za maksimalen presek obdelovanca 56 x 46 mm. - Motor 2,2 kW, 380 V, 50 Hz - Pnevmatski tlak 6 bar Vključuje: ----- - Podnožje za mizo - Nožno stikalo - NOVO, ORIGINAL prislonsko letvico z merilno lestvico in premičnim prislonom z nastavitveno optiko, kot je prikazano na slikah. Orodja, kot so prikazana na slikah: 1 kos profilni rezkar 3 žagini listi (za širino stega 10 mm) Mere postavitve približno DxŠxV: 1.330 x 570 x 1.430 mm Teža: cca 150 kg ----- (vse tehnične specifikacije po podatkih proizvajalca, brez garancije!)

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Bdedpfx Ast Uduxeiqoh

Stanje: pripravljen za uporabo (rabljen), Delovna širina 410 mm Dolžina strojne mize 1450 mm Število rezalnih nožev 4 kos Moč motorja 4 kW Mere (dolžina/širina/višina) 2650x850x1100 mm Teža stroja približno 750 kg SCM strojna oprema za ravnanje in žaganje F 410 N ----- Tehnični opis proizvajalca: Bdjdpfx Aowzmu Dsiqjh Širina žaganja: 410 mm Skupna dolžina mize: 2600 mm Višina mize: 855 mm Dolžina podajalne mize: 1450 mm Aluminijast vodnik za ravnanje, nastavljiv do 45° Mere vodnika za ravnanje: 1100 x 170 mm Premer valja z 4 rezalnimi noži: 120 mm Število vrtljajev valja z rezalnimi noži: 5000 vrt/min Moč motorja: 4 kW TERSA monoblok, enouporabni, obojestranski noži SCM zaščitni sistem za ravnanje, integriran v okvir stroja Sesalni priključek, premer 120 mm Ročno stikalo zvezda-trikot Stikalo za zaščito motorja, sprožilec pri nizki napetosti Glavno stikalo, možnost zaklepanja Avtomatska zavora motorja Nastavljiv pomožni vodnik ----- Cena zgoraj navedenega stroja je na zahtevo! ----- (tehnične specifikacije po navedbah proizvajalca - brez jamstva!) Vse navedene cene so neto cene, k njim se doda zakonski DDV.

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h Bedpefyadbsfx Aiqsdh • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2022, stanje: novo, Shelves: 17 Clear spacing between pipes: 60 mm Support pipe length: 650 mm Length: 200 - 2000 mm Swivel castors: Polyamide, 4 pieces Depth: 870 - 1180 mm Height: 198 mm Load capacity: 400 kg Bedpfx Aied Ry I Njqjdh

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg Bjdpfx Aoy Ehrxoiqodh – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Nice machine in good condition due to coming from a small business, with low operating hours. Comes with IV 68 tool. Still set up and ready for demonstration on site. Bdsdju S Afcopfx Aiqoh

Stanje: rabljeno, Leitz HM - IV 66, komplet za okno z okvirjem in garnituro za vhodna vrata. Prodaja v trenutnem stanju, orodje ni bilo na novo nabrušeno. Prevzem na lokaciji prodajalca, Seevetal. Bjdpfxohzgy Ns Aiqsdh Brez transporta. Pridržana pravica do prodaje tretji osebi.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, max. workpiece length 4400 mm milling spindle: 1 unit main motor: 19.2 kW control: Beckhoff CNC machining centre MASTERWOOD 4 WIN ---- Specially designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimum tool configuration - Simultaneous loading with 4 workpieces - Patented clamping system for optimal workpiece machining - CNC-controlled worktable with automatic positioning of beams and clamps Bdjdpjyyqm Usfx Aiqsh - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window construction software, i.e. the machine does not need to (but can, of course) be controlled externally from the office by sector-specific software - Powerful 19.2 kW main motor with HSK-63 E Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Tooling available for prompt delivery upon request! Request a quotation and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will also find the technical description of the machine as a PDF document attached. We would be happy to take your used machine in trade at a fair price! Matching stationary or mobile extraction units available on request! (see e.g. #5674 NESTRO NE 300) Suitable compressor on request! (#5997 Kaeser Aircenter SM 15) (Technical specifications as per manufacturer – subject to change!)

Stanje: novo, Working length 4000, 5000 mm Working height 120 mm Tiltable: yes Bedpfxexmk Ams Aiqsdh Rapid DGS 200 Double Mitre Saw ----- with saw blade diameter 420 mm, manual length adjustment with digital length display Perfect dimensional and angular accuracy guaranteed. We use precise and efficient drive technology for this: Linear ball bearing guides for length adjustment, spring-mounted tilting units for convenient and safe angle adjustment between 45° and 90°. Both length and angle adjustment on this double-head mitre saw are performed manually. Enhanced operator comfort and productivity can be achieved by means of the digital length display. System features: ----- - Manual length and angle adjustment - Saw blade Ø 420 mm - Robust welded frame construction - Ball-bearing linear guides with long service life - Hardened guide shafts - Electronically balanced saw blade flange - Direct-drive motor - Tilting axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and associated corrections - Edit the 30 profile numbers (name + correction) directly via the display - Correction calculated automatically according to saw angle (45° and 90°) - Piece counter: If the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: automatic conversion of length and profile height according to angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-aluminium - Aluminium - Wood, wood-aluminium Maximum precision thanks to twin-shaft guidance ----- With 420 mm saw blades, a wide range of aluminium or PVC profile systems can be processed. Simple operation, maximum precision, and reliability make the DGS200 particularly attractive for insect screen frame production in small batches. The DGS200 double mitre saw is also popular as an entry-level model for window manufacturing. In the woodworking sector, the saw is used for cutting a variety of strips in furniture construction and interior design. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Tilting range: manually adjustable 45° to 90° Saw blade: 420 mm diameter Cutting lengths: 4,000 mm, 5,000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5200 / 1200 / 1500 mm Weight: 800 kg (Technical data as per manufacturer – no guarantee!)