Univar nakup rabljenega (17)

Stanje: rabljeno, Upogibni avtomat WEINIG UNIVAR 10 iz UC-Matic linije za okna, ni v delujočem stanju. Klodpelf H Sqofx Af Njl - Leto izdelave: 1997 - Krmiljenje Sütron BT20 - Stroj je nepopoln - Podrobnosti na zahtevo - Slika je simbolična.

Stanje: rabljeno, for profiling and rebating windows, doors, individual parts, and similar components with circumferential profiles, including return conveyor Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, Kjdpfxslf H Sus Af Nell 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Stanje: rabljeno, For profiling and trimming windows, doors, individual components, and similar items with continuous profiles, including mechanization for single-person operation. Kedpfx Aelf H S Asf Noll Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, co-direction drive system. 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic. 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW. 4. Profile milling unit, horizontal below, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW. Trimming carriage for narrow and short sashes, PC control Nexus.

Stanje: rabljeno, Used control cabinet from a Weinig Univar 10, suitable as a parts donor or for constructing a new control cabinet. Contents include, among others: • EMC PA10A513 • Interbus • Moeller PKZM • Schaffner FN351-25-33 • Lenze EVF8216-E Kledpfx Afelkcfdo Nel • Setzermann SS6E3/5 • Siemens 3TD43 Individual parts available on request.

Stanje: rabljeno, Povratni transport / mehanizacija, primerna za Weinig Univar za transport celotnih okenskih kril, plošč ali podobnih velikih obdelovancev (600071). Kledpovn N Ihofx Af Njl

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Klodpfjh H Iyxex Af Nsl Univar 15 Unitex 15

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines WEINIG Kljdpfxeiix Uve Af Nsl Tenoning and slotting machine UNITEC 10, year 1997 Profiling and finish-milling machine UNIVAR 10, year 1997

Leto izdelave: 1987, Stanje: zelo dobro (rabljeno), Automatic flipping device WEINIG UNIVAR 10 Klsdjf Upzhjpfx Af Njl

Stanje: rabljeno, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Profile Reworking Machine ----- For re-profiling of windows, doors, and similar items featuring asymmetrical perimeter profiles. Suitable for timber thicknesses from 68 to 92 mm. Processing time per frame re-profiling for a medium size (1.20 x 1.20 m) – approx. 2 min. Available tool positions can be selected via the operator control panel. The machine is equipped with three hydraulically controlled right-side precision lifting spindles, designed to accommodate three tool sets, each spindle providing 2 x 95 mm vertical spindle stroke. The spindle stroke is performed in a U-motion, enabling minimal opening in the milling fence when processing short parts. Spindle stroke can be finely adjusted horizontally for both tool positions from the operator side. Centralized lubrication for spindle units. For tear-free re-profiling of window sashes or frames and doors, the first spindle can be selected for clockwise or counterclockwise rotation. At each of the last 100 mm at the end of a frame, this spindle with the corresponding climb-cutting tool plunges into the passing timber. This prevents tear-out caused by the following counter-rotating milling spindle. The first seven transport rollers can be lifted via foot pedal, shortening the throughput time. An additional support rail permits re-profiling of large-format frames as well. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height is electronically measured and displayed. Electrical design according to VDE standards. Machine is supplied with operation tools, but without machining tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1st Profile Spindle (climb and counter-rotation) ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm With automatic climb-cutting plunge mechanism 2nd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Kjdpfxovnv Uue Af Nell Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 3rd Profile Spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool base circle: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 4th Profile Spindle – Fitting (hardware) unit, right ----- For machining the hardware groove during the re-profiling pass or for grooving along the longitudinal profile. Pneumatic horizontal movement with selector switch at the operator control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm (for 2 tools) Tool cutting circle min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Stanje: rabljeno, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle length: 120, 320, 125 mm Weight: 2500 kg Klsdpfx Afoxpi Els Njl Loading dimensions (L x W x H): 3800 x 1400 x 2000 mm Table length: 3470 mm Weinig Univar 6 P For sale on behalf of client ----- Operating voltage: 380 volts, 50 Hz. For re-milling windows, doors, and similar items with asymmetrical continuous profiles. Aggregate arrangement: 1. Climb-cut spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle The profiling spindle is suitable for holding several tools stacked above each other. Spindle movement is pneumatic. To achieve tear-free re-milling, spindle 1 works in climb-cut mode. For the last 100 mm of each frame end, this spindle plunges with the corresponding tool into the wood to avoid tear-out at the frame corners. Machine body, tables, fences: The machine body is made of heavy, torsion-free, and vibration-damping elements. Fences on the right in the profiling area are made of Pertinax. In front of the profiling spindle there is a split fence with sliding rail for short parts. Additional stop rail for large-format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blowing system for cleaning feed rollers and table. Spindles, hood: Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip flow. Easiest tool changes thanks to quickly opened hood covers. Machine operation, adjustment aids: Operation from the front side. Adjustment of the fences to the tool diameter via mechanical digital display. Electrical system, motors, control: Electrical equipment according to DIN VDE 0113 - Electrical equipment of industrial machines EN 60204 IEC 204-1. Other electrical regulations are not considered. Motors dynamically balanced. Control of tool positions via selector switch from the control panel. Tools: Machine equipped with set-up tools, but without processing tools. SPINDLE 1 Climb-cut spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10 mm Motor power: 4 kW (5.5 kW) SPINDLE 2 Number of tools: 4 Spindle travel vertical: 3 x 80 mm = 4 tools Optionally switchable to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50 mm/35 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Max. tool diameter With zero diameter 112 mm: 210 mm With zero diameter 140 mm: 232 mm Max. tool diameter (re-milling): 232 mm Tool zero flight circle: 112-140 mm Base position below table: 10/5 mm Motor power: Spindle: 11 kW, Feed: 1.1 kW Feed profiling unit: stepless 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Fence height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenon: min. 245 mm Special equipment: 3 mechanical spindle br...

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good! Kedpfxsfzzhys Af Njll

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), I am selling the Weinig Univar 10 window profile doubling center. Year of manufacture: 1998. Milling heads: OERTLI. Kedpfxofzzhrj Af Nsll Available immediately. Unit price: 8,500 euros. 4 units available. Condition: very good!

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), I am selling the complete window manufacturing profiling line: 1 pc. 5-spindle four-sided planer with saw, Weinig Unimat 23EL - without HESS sanding machine – alternative replacement machine negotiable 2 pcs. tenoning and slotting machines, Weinig Unitec 10 Klsdpfofzzidjx Af Nol 2 pcs. profiling and rebate automation centers, Weinig Univar 10 1 pc. CNC dowel drilling machine, KOCH WinDoor - Set of complete Weinig automation infeed and conveyors Year of manufacture: 1997. Milling heads: OERTLI. Available immediately. Already dismantled and placed on original pallets. Condition: very good!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 Kljdpfemgc I Nsx Af Njl - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: rabljeno, - Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar Kjdpfslkckqjx Af Nell - Series actuation on both sides or with spring return - Quantity: 27 Price per unit: €25.00 + VAT

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: very good Description: The Weinig Unicontrol 10 is an automatic CNC machine designed for planing and profiling wooden components, particularly used in the production of window and door joinery. It combines four-sided planing with precise profiling capabilities. Main features: ✅ Automatic adjustment of spindles and guides via CNC system ✅ Very high machining accuracy – ideal for series production ✅ Quick machine changeover thanks to profile settings memory ✅ Robust and durable frame construction ✅ Capability to work with various types of wood – both soft and hard Kedpswbikbsfx Af Njll Included: Weinig Univar 6, year of manufacture: 1996, also in very good condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, WEINIG, Type UNICONTROL 10/3, Machine No. 032-1136, Year of manufacture 1993 Technical specifications: Crosscut saw with 4-position rotary indexing, laser guide light Vertical stroke: 125 mm Speed: 2800 rpm Spindle diameter: 40 mm Tool diameter: 350 mm Clamping length: 40 mm Horizontal stroke: 160 mm Motor: 4 kW Extraction port: 80 mm diameter UNITEC slotting spindle 50 x 300 mm 3 tools Vertical stroke: 2 x 100 mm Speed: 3500 rpm Spindle diameter: 50 mm Tool diameter: 300–320 mm Clamping length: 300 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm (climb/counter-rotation spindle) 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter Configuration: Kjdpfswk U Rljx Af Nsll Minimum working width: 30 mm / Minimum working height: 30 mm Maximum working height (with stroke): 100 mm / Maximum working height (without stroke): 120 mm Feed: 1.1 kW / infinitely variable 6–12 m/min Tool set: LEITZ Dufix IV-68 EURO window Digital display for studio window Mechanical length stop Screen control Twin-part package Return roller conveyor Machine is in good technical and visual condition and fully functional NET PRICE: EUR 7,400 (plus VAT) Delivery: EXW Lead time: Short notice by arrangement Inspection: By arrangement Subject to prior sale and errors.