Poreba nakup rabljenega (40)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, - razdalja med konicama / dolžina struženja: 5000 mm - premer struženja nad posteljo: 930 mm Hedpfjwnnuxex Af Teng - premer struženja nad suportom: 650 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 630 mm, premer struženja: 1.500 mm, premer struženja nad ležiščem sani: 1.000 mm, The PORĘBA TR-100C facing lathe has been extensively rebuilt and modernized by us. It features technical parameters that comply with the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul upon order, delivery time 3.5 months from commissioning Technical Data: - Swing diameter in bridge gap: 1500 mm - Swing diameter over bed: 1000 mm - Swing diameter over carriage: 630 mm - Spindle bore diameter: 130 mm - Speed range (rpm): 5 – 500 - Feed range (mm/rev): Longitudinal: 0.045 – 6 Cross: 0.022 – 8 - Motor power: 22/28 kW (1st gear / 2nd gear) - Overall dimensions: Overall length: 2700 mm Width: 2130 mm Height: 1400 mm - Total weight: 8000 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions Hjdpfshyg Iyex Af Tsng - Digital readout for 2 axes, incl. display, with installation and calibration

Stanje: generalkompletno obnovljen (rabljeno), Centre height: 1000 mm Swing over bed: 2000 mm Turning diameter: 1600 mm Turning length: 10,000 mm Spindle bore: Ø 105 mm Main motor power: 71 kW Maximum spindle torque: 40,000 Nm Chuck plate diameter: Ø 1600 mm Tool system: Turret head or slide rest – to be agreed upon Control system: Siemens / Sinumerik 840 D sl Number of spindle speeds: 3 Spindle speed range: 250 rpm (for 1600 mm chuck) Rapid traverse longitudinal / cross: 4000 mm Tailstock quill diameter: Ø 280 mm Tailstock quill travel: 200 mm Load capacity: Maximum workpiece weight between centers: 30,000 kg Maximum workpiece weight between centers with one steady rest: 35,000 kg Hnodpfxjn Up R So Af Tog With two steady rests: 40,000 kg Lathe dimensions and weight: height 2400 mm, width 3000 mm, length 15,700 mm (turning length + 5700 mm) Weight of TCF200 x 10 m lathe: 46,000 kg The lathe is currently undergoing advanced refurbishment. The customer can inspect the lathe and the works on-site at the ZAK company in Poręba. IMPORTANT! The photos also show other lathes refurbished by our company (TCG, TCH300, TCE...) as well as new TRP and TRB lathes manufactured under the RAFAMET S.A. license.

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 930 mm Swing diameter over support: 630 mm Turning length: 6000 mm Swing diameter in gap: 1250 mm Spindle bore: 95 mm Speed range: 8 - 800 rpm Total power requirement: 25 kW Space requirement approx.: 9 x 2 x 1.9 m Faceplate 2 fixed steadies Coolant system Hjdpfxjvndddo Af Tong Taper turning attachment

Leto izdelave: 2023, Stanje: generalkompletno obnovljen (rabljeno),

Leto izdelave: 1985, Stanje: zelo dobro (rabljeno),

Stanje: novo,

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, skupna dolžina: 5.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, skupna masa: 12.300 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B/4M has undergone a comprehensive rebuild and modernization by us. It features technical parameters that comply with the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: complete overhaul made to order, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 4000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg Hsdpfxsflaxvo Af Teng - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 6500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12,300 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Stružnica POREBA TPK 80 / 10 m naprodaj. Letnik izdelave 1983. Dolžina struženja 10 m! Stroj v zelo dobrem stanju. Veliko dodatne opreme. Na voljo video. Hnjdpfsx Il R Dox Af Teg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Prodam ta stružnica, priključena, možnost preizkusa. Premer obdelave nad ležiščem: 1.600 mm Premer obdelave nad suportom: 1.300 mm Dolžina struženja: 6.000 mm Siemens Sinumerik 840D Hnedpexxtc Tofx Af Tjg Na stroju se zaključuje naročilo. Na voljo konec januarja 2026.

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: nepreverjeno, Brusilni stroj na prodajo. Potrebuje obnovo. Hnjdpfx Afexbyzuo Tsg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/6M has been comprehensively rebuilt and modernised by us. It features technical specifications that match the documentation of a new machine, meets the technical acceptance standards of the WOT and the Polish Norm, and also complies with EU requirements. Hodpfx Afskyt Hls Tsng The machine comes with a full 12-month warranty on spare parts and electrics. Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical data: - Centre distance/Turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm - Powered top slide - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg Hnjdpsv Ab Dqsfx Af Teg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/5M has been completely overhauled and fully modernized by us. It features technical specifications in line with the technical and operational documentation of a brand-new machine, meets WOT technical acceptance requirements and Polish standards, and also complies with EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrics. Availability: in stock, powered-on, ready for technical inspection. Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 1,350 mm Hedsva Elajpfx Af Tsng - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Motor drive for top slide drawer for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and options - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/10M has been extensively rebuilt and modernized by us. It features technical specifications that are fully compliant with the technical and operating documentation of a new machine, meets the technical acceptance requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul upon order, delivery time 3.5 months from commissioning Technical data: - Centre distance/turning length: 10,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool post Hnsdpfeva Ebnjx Af Tog Additional equipment available at extra cost: - 3-jaw or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 12.900 kg, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/5M has been thoroughly rebuilt and modernized by us. Its technical specifications match those of a new machine’s technical and operational documentation, fulfill the acceptance criteria of WOT and Polish standards, and also meet EU requirements. The machine comes with a full 12-month warranty covering spare parts and electrical components. Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical Data: - Distance between centers/Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st/2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12900 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment at extra cost: - 3- or 4-jaw chucks, various diameters and variants - Digital Read Out for 2 axes, incl. display, with installation and calibration Hnsdpfsi Apilex Af Teg - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolholder

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 14.100 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/6M has been extensively rebuilt and modernised by us. It features technical specifications that comply with the technical and operating documentation of a new machine, satisfies the technical acceptance conditions of the WOT and the Polish standard, and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from placement of order Technical data: - Centre distance / turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over support: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centres: 8,000 kg - Max. workpiece weight between centres + 1 steady rest: 10,000 kg Hedpfjfhk Inex Af Teng - Max. workpiece weight between faceplate teeth + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 3.000 mm, skupna dolžina: 5.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, skupna masa: 11.400 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B/3M has been extensively rebuilt and modernized by us. It features technical specifications that fully correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from order placement Technical data: - Distance between centers / turning length: 3000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Main motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: - Total length: 5500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 11400 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Hedsdy I I Aspfx Af Tsng Optional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, including display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/10M has been comprehensively rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also complies with EU regulations. A full 12-month warranty on spare parts and electrics applies to the machine. Hedskh Hbhopfx Af Tsng Availability: custom general overhaul, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 10,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Length: 12,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chucks in various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Leto izdelave: 2024, Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, This universal lathe is professionally overhauled and modernized in our workshop according to customer order and meets all technical standards and parameters of a comparable new machine of this type. The machine is completed and ready for collection within a maximum of 3 to 3.5 months from the time the order is placed. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing diameter over bed [mm]: 930 mm - Swing diameter over carriage [mm]: 650 mm - Swing diameter in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Centre distance [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6000 kg - Max. workpiece weight with 1 steady rest [kg]: 7500 kg - Max. workpiece weight with 2 steady rests [kg]: 9000 kg - Number of spindle speeds: 21 - Speed range [rev/min]: 8–800 Hnedpjkh D Txefx Af Tjg - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been extensively rebuilt and modernised by our team. It features technical specifications consistent with the documentation of a new machine, complies with WOT technical acceptance conditions and Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: In stock, powered, and available for inspection at any time. Technical data: - Centre distance / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm Hedoiwa Iajpfx Af Tsng - Spindle bore: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 1,800 mm Height: 1,800 mm - Net weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, mounting and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 800 mm, premer struženja nad ležiščem sani: 800 mm, premer struženja nad zgornjim sanežem: 530 mm, stružna dolžina: 3.000 mm, The universal lathe PORĘBA TPK-80/3M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standard, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: general overhaul to order, delivery time 3.5 months from order placement Technical Data: - Distance between centers/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Hjdpfx Afjfknw Re Teng - Total length: 5000 mm - Width: 1800 mm - Height: 1800 mm - Total weight: 6200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, different diameters and variants - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 900 mm, premer struženja nad ležiščem sani: 900 mm, premer struženja nad zgornjim sanežem: 570 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, nosilec vretena: MK 6,

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, skupna dolžina: 10.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 9.200 kg, The universal lathe PORĘBA TPK-90/8M has been comprehensively rebuilt and modernised by us. It features technical specifications equivalent to the technical and operational documentation of a new machine, complies with WOT technical acceptance standards and Polish regulations, and also meets EU requirements. The machine comes with a full 12-month warranty for spare parts and electrical components. Availability: made-to-order complete overhaul, delivery time 3.5 months from order confirmation Technical specifications: Hnodpfxjdyvh Ns Af Tsg - Distance between centres / turning length: 8,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st/2nd gear) - Overall dimensions: Total length: 10,500 mm Width: 1,800 mm Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with roller supports - Steady rest 400-700 mm, with roller supports - MULTIFIX quick-change tool post

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer struženja: 930 mm, premer struženja nad ležiščem sani: 650 mm, stružna dolžina: 6.000 mm, skupna širina: 8.500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power, and can be inspected at any time. Equipment as shown in the photos. Technical specifications: - Distance between centers / turning length: 6,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm Hnsdpfxev Epkke Af Teg - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg