Sredinski stružnica in stružnica za vreteno

POREBA TPK 90

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 9.200 kg, The universal lathe PORĘBA TPK-90A1/8M has been comprehensively rebuilt and modernised by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets WOT technical acceptance requirements and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: available from stock, powered up, and ready for inspection at any time. Technical data: - Distance between centres / turning length: 8,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Installed inverter/variable frequency drive for soft start - Overall dimensions: Total length: 10,500 mm Width: 1,800 mm Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder (without steady rests) Optional equipment at extra cost: - 3- or 4-jaw chuck, various diameters and versions - 2-axis digital readout, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - MULTIFIX quick-change tool post Kdsdpfjyi U Rbox Abxsn

Leto izdelave: 1993, stanje: rabljeno, TYPE: DEA 400/2000 Year: n.d. Kdedpfx Aeihf R Uobxon Ram Capacity: 400 tons Slide Stroke: 1,100 mm Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Height Above Floor: 5,800 mm Distance Between Uprights: 3,400 mm Lateral Window: 1,600 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TPK-90/5M has undergone a comprehensive overhaul and modernization by us. It features technical specifications that correspond to the operating and technical documentation of a new machine, complies with WOT technical acceptance requirements, Polish standards, and also meets all EU directives. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, ready for inspection at any time Technical specifications: Kdsdpfx Aowk Iq Eebxon - Distance between centers / Turning length: 5,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 1,800 mm Height: 1,800 mm Total weight: 7,300 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment (available at extra cost): - 3- or 4-jaw chucks, various sizes and versions - Digital Read Out for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 4.000 mm, skupna dolžina: 6.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 6.400 kg, The universal lathe PORĘBA TPK-90A1/4M has been extensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance criteria of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered, available for inspection at any time Technical data: - Distance between centers / Turning length: 4000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 6,500 mm - Width: 1,800 mm - Height: 1,865 mm - Total weight: 6,400 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder (without steady rests) Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - MULTIFIX quick-change tool post Kdedpsykzvysfx Abxon

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, premer struženja nad prečnim suportom: 925 mm, stružna dolžina: 2.800 mm, premer struženja: 1.200 mm, izvrtina vretena: 132 mm, največja hitrost vretena: 2.000 obr/min, Siemens 840D CNC 48-position tool changer with Capto C8 tools Chip conveyor Forkardt 400 mm chuck 2 SMW Autoblok hydraulic steadies Kodpfxjwzyn Rj Abxedn Capacity: 2,800 x 1,250 mm Spindle bore: 132 mm Weight: 23,500 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The PORĘBA TPK-90/6M universal lathe has been thoroughly rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the acceptance criteria of the WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: lead time from 3 to 3.5 months, general overhaul to order Technical specifications: - Centre distance/turning length: 6,000 mm - Swing over bed: 930 mm - Swing over carriage: 650 mm - Swing in gap: 1,200 mm Kdodpfx Abjiwa Iaexen - Spindle bore: 95 mm - Maximum workpiece weight between centres: 6,000 kg - Maximum workpiece weight between centres + 1 steady rest: 7,500 kg - Maximum workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 8,500 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 8,000 kg Standard equipment: tailstock, coolant pump, chuck guard, toolpost Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and variants - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, This universal lathe is professionally overhauled and modernized in our workshop according to customer order and meets all technical standards and parameters of a comparable new machine of this type. The machine is completed and ready for collection within a maximum of 3 to 3.5 months from the time the order is placed. Warranty: 12 months warranty on the modernized, overhauled machine. Kdodpfx Abskh D Txexen Technical Data: TPK 90 - Swing diameter over bed [mm]: 930 mm - Swing diameter over carriage [mm]: 650 mm - Swing diameter in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Centre distance [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6000 kg - Max. workpiece weight with 1 steady rest [kg]: 7500 kg - Max. workpiece weight with 2 steady rests [kg]: 9000 kg - Number of spindle speeds: 21 - Speed range [rev/min]: 8–800 - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Stanje: rabljeno, Leto izdelave: 2003, Maks. premer struženja: 420 mm Dolžina struženja: 1090 mm Krmiljenje: FANUC serija 18i-TB Prehod glavnega vretena: 108 mm Vpenjalna glava: 250 / 315 mm Območje vrtljajev: 0-3750 min⁻¹ Podajalna hitrost: 18/24 m/min Orodja: 12 Hod konice: 100 mm Premer konice: 110 mm Priključek: MK 4 Število gnanih orodij: 12 Obrati: 3000 min⁻¹ Ksdpfx Absucgyljxodn Navor: 22 Nm Rezervoar za hladilno tekočino: 140 l Skupna potrebna moč: 22/18,5 kW Teža stroja pribl.: 6500 kg Cilindrično držalo DIN 69880: VDI 50 Obdelava palic: Ne Obdelava v vpenjalni glavi: Da Hidravlična luneta notranji premer: Dm 20-165 mm

Stanje: dober (rabljeno), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1: 150 mm Swing steady 2: 350 mm Swing steady 3: 500 mm 3 units suitable for TPK 90 (or with spacers, TPK 110) Spacers are not included Second tool post to be mounted on the slide Specifications Metric | US Standard There are (currently) no specifications available for this machine. Approximate dimensions: Kedpfx Aswrrbksbxjdn Length: 1200 mm Width: 800 mm Height: 1000 mm Weight: 1800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The details are given in good faith but accuracy cannot be guaranteed. As such, they do not constitute representation or contractual conditions. We recommend verifying all critical details.

Stanje: novo, Spare parts for POREBA lathes A comprehensive spare parts inventory for Poreba lathes: TR55, TR70, TR70B, TR80, TR90, TR90B, TR100B, TR115, TR135, TR135B, TCC125, TCA125, TCA160, TCG125, TCG160, TCG200, TPC90, TRP110MN, TZG250, TNA90N and many more. – Gears, shafts, and gear wheels – Rack bars – Lead screws and feed screws with nuts – Cross-slide screws with nuts – Electromagnetic clutches and brakes, brush holders – Pumps, filters, motors – Steadies and travelling steadies – Tailstock quills – Tool holders – Lathe chucks Kdedpfxov R Uaue Abxen Contact us for further information.

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.200 mm, 5-axis machining center in gantry design with a powerful motor spindle. EDEL CYPORT - CP 4030 Travel X/Y/Z: 4,000 / 3,000 / 1,200 mm Portal clearance Y/Z: 3,276 / 1,405 mm Rapid traverse X/Y/Z: 30/30/30 m/min 2-axis NC machining head M-Series (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/-360° Powerful CYTEC milling spindle: Tool interface: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% duty cycle) Torque: 200/253 Nm (100%/40% duty cycle) Control: HEIDENHAIN TNC 7 HEIDENHAIN wireless handheld control with charging station DXF converter CAD viewer KinematicsOPT with tool kit Remote maintenance Increased energy efficiency (certificate) Tool magazine: Number of slots: 64 HSK-A100 Max. tool diameter: 105/150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank capacity: 1,600 L External coolant supply: 20 bar Internal coolant supply: 50 bar Paper band filter, rinsing gun Chip conveyor Coolant-air blast switch Extraction system for oil and emulsion mist Workpiece measuring system BLUM TC 60, wireless Tool measurement: BLUM LaserControl Micro Single NT Kedpfx Aeir Iczjbxsdn Machine enclosure Safety devices Documentation CE certification We also optionally offer financing through our leasing company. CYPORT – Flexible, Powerful, Dynamic. Minimal footprint with maximum machining area. Made in Germany

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, največja hitrost vretena: 800 obr/min, moč vretenovega motorja: 16.000 W, skupna višina: 1.800 mm, skupna masa: 7.300 kg, število osi: 2, This Poreba TPK 90/5M horizontal lathe was manufactured in 1984. It features a swing-over bed of 930 mm, a spindle bore of 95 mm, and can handle workpiece weights of up to 9,000 kg using two steadies. The machine is equipped with a tailstock, coolant pump, chuck guard, and tool holder. Take advantage of this opportunity to purchase the Poreba TPK 90/5M horizontal lathe. Contact us for further information about this machine. Kdjdpjyaqinofx Abxon Additional Equipment • Standard equipment: Coolant pump, chuck guard, tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, including display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change toolpost Machine Advantages Technical Benefits: • Distance between centres / turning length: 5000 mm • Gap bridge: 1200 mm • Max. workpiece weight between centres: 6000 kg • Max. workpiece weight between centres + 1 steady: 7500 kg • Max. workpiece weight between centres + 2 steadies: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): – longitudinal: 0.1 – 12.8, – cross: 0.05 – 6.4 Additional Information The machine has been completely overhauled and comes with a 12-month warranty. Dimensions Machine depth: 7500 mm

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 930 mm Swing diameter over support: 630 mm Kedpfjvndddsx Abxjdn Turning length: 6000 mm Swing diameter in gap: 1250 mm Spindle bore: 95 mm Speed range: 8 - 800 rpm Total power requirement: 25 kW Space requirement approx.: 9 x 2 x 1.9 m Faceplate 2 fixed steadies Coolant system Taper turning attachment

Stanje: rabljeno, Leto izdelave: 2006, Full Bore Diameter / mm Drilling Depth / mm Number of Spindles / 2-Machine Package: Froriep Deep Hole Drilling Machine & Irle Finishing Machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated units for the complete machining of long, heavy workpieces that demand maximum precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-Machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. Drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Max. swing over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC Control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outside diameter: 850 mm With up to 50,000 Nm torque perfectly suited for smooth boring, honing, and demanding finishing processes. Your advantages at a glance: - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tonnes - High process reliability thanks to perfectly synchronized machines Kdodpfxjuddimj Abxen - Immediately available, well-maintained, and in operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large-part manufacturing