Rezervni deli za stružnice POREBA TR, TPK

POREBA TR135, TPK-90

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), V povezavi z načrtovano likvidacijo laboratorija v maju/juniju 2026 ponujamo v prodajo laboratorijsko opremo v zelo dobrem oziroma odličnem stanju – kompletno opremo. Ledpfoxmhfrox Al Nsaa Vsa oprema je bila uporabljena skladno z namenom, redno vzdrževana, tehnično popolnoma delujoča in pripravljena za takojšnjo uporabo. Ponudba med drugim vključuje: LCS MS/MS, GC MS, digestorije, spektrofotometer, stresalnike, laboratorijske hladilnike, mineralizator, vodno kopel, laboratorijsko pohištvo in še veliko več. Odlična priložnost za raziskovalne ustanove, univerze ter podjetja iz biotehnološke, kemijske in medicinske industrije za pridobitev vrhunske opreme po zelo ugodnih cenah. Možna je predhodna rezervacija posameznih naprav. Prevzem možen od maja 2026 ali po individualnem dogovoru. Vabimo vas k ogledu opreme na lokaciji na Poljskem, vojvodina Varmijsko-Mazurska.

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Ljdpfx Alsg Rn Avs Nsaa Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.

Stanje: zelo dobro (rabljeno), Sunnen GH210 Horizontalni honalni stroj Leto izdelave: 2010 Maksimalni hod: 8000 mm Hitrost vretena: 0 - 300 rpm Maksimalna moč vretena: 40 KM (29,83 kW) Maksimalna moč pomika: 18 KM (13,42 kW) Razpon hitrosti pomika: 0 – 100 ft/min (0 – 30,5 m/min) Notranji premer (I.D.): 2 – 24 palcev (50,8 – 609,6 mm) Zunanji premer (O.D.): 26 palcev standard (660,4 mm) Največja teža obdelovanca: 8000 kg Približna teža stroja: 12.066 kg Napajanje: 400 VAC 50 Hz, 3-fazno (85 A) Siemens Simatic krmiljenje, Lasdpfx Aow U Uh Del Nja

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Ledpfx Ajt Hw T Sjl Neaa Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, moč: 37 kW (50,31 KM), stiskalna sila: 250 t, hod: 150 mm, širina mize: 900 mm, dolžina mize: 1.000 mm, skupna masa: 16.000 kg, Very nice and well-maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm W: 200 cm L: 200 cm Weight: 16,000 kg. Can be loaded by crane upon collection and payment. Transport can be arranged. Sold on behalf of customer. Laedpjry Trpsfx Al Nja Location: DK-7600 Struer. Please schedule an appointment for a viewing.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Laodpsh Ek Dasfx Al Noa Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Gear milling cutter Module 8 20 degrees Length: 1800 mm Diameter: 120 mm Laodpsdklt Nofx Al Nsa Bore: 40 mm

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm Lasdpfx Alef Ezdns Nja - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm - Condition: visually and technically impeccable, runs very quietly

Stanje: rabljeno, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture 1986 - rebuilt in 2000 Pressing force: 200 tons Frame opening (front): 2050 mm Frame passage (side): 2030 mm Lodpfjdzp Tcsx Al Nsaa Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid approach speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Mains connection: 380 Volt, 50 Hz - 8-way flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in upper dead center - Position measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - 2-hand control panel, free-standing - Floor-level installation - Central lubrication - Operating manual with circuit diagrams Space required for press (upright), L x W x H: 3700 x 2900 x 5900 mm Overall machine height with motor: 5900 mm Space required for horizontal transport, L x W x H: 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition.

Stanje: pripravljen za uporabo (rabljen), DANOBAT RTM 2500 – CNC Surface Grinding Machine | 2,500 mm Travel | 3,100 kg Table Load Capacity High-capacity CNC surface grinder, ideal for large-format and precision work. Robust, reliable, and equipped for demanding applications. 🛠 Key Technical Specifications: • Maximum grinding length: 2,500 mm • Maximum grinding width: 900 mm • Maximum grinding height: 1,000 mm • Usable table area: 2,500 x 800 mm Lajdpfx Alshq Ui Io Nja • Maximum table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • Table speed (X-axis): 1 – 30 m/min • X-axis travel: 2,650 mm • Cross travel (Z-axis): 800 mm • Vertical travel (Y-axis): 1,150 mm • Z-axis rapid traverse: up to 8,000 mm/min • Y-axis rapid traverse: up to 1,000 mm/min • Programmable increments: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding Unit (Headstock): • Grinding wheel diameter: 500 mm • Grinding wheel bore: 203.2 mm • Maximum wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Rated speed: 1,000 rpm • Grinding wheel motor power: 15 kW • Total installed power: 30 kW ✅ Additional Features: • All axes equipped with Turcite-coated prismatic guideways • Angular grinding head • Paper band filtration unit • 4 kW hydraulic unit 📌 Industrial grinder ready for heavy-duty challenges. Perfect for workshops that require high flat machining capacity with micrometric precision.