Poreba TPK 90/5M

Poreba TPK 90/5M

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), 1x Drive unit with chassis 1x Idler unit with chassis and height adjustment - Central roller support adjustment with hand crank. - Manual height adjustment, locking with pin - Height difference adjustable from 0–350 mm - Load capacity: 2,500 kg per unit - Component diameter: 200 mm – 2,000 mm - Wheels: PUR rollers - Dimensions (L/W): approx. 1,900 mm x 460 mm - Chassis track width: 1,435 mm - Rotation speed: 0 – 2,000 mm/min Gbsdpfx Asfxgrdegyei - Operation: Handheld remote control and foot switch

Stanje: novo, Table diameter: 780 mm Table load capacity: 1.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.15 - 1.5 rpm Table height adjustment: from 780 to 1560 mm Torque at faceplate: 1000 Nm Welding current: 500 amps Features - Self-locking gearbox, no creep or run-on with eccentric load Gjdpfx Agjfv Ay Ssysbi - Hydraulic height adjustment allows for almost unlimited positioning - Electronic quality components from Schneider, Siemens, and Delta - Italian hydraulic components - Frequency-controlled, stepless speed of the turntable - High stability due to heavy and compact construction - CE certificate - Excellent price-performance ratio - Supplied as standard with remote control and dual foot pedal - 3 years warranty (see warranty conditions)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 3.400 obr/min, potovalna razdalja osi X: 239 mm, pomik osi Y: 51 mm, pomik po osi Z: 826 mm, moč vretenovega motorja: 22.400 W, število osi: 3, This 3-axis HAAS ST-30Y horizontal lathe was manufactured in 2022. It features a 10-inch chuck, a maximum turning diameter of 13.75 inches, and a turning length of 32.5 inches. The machine is equipped with a BMT-65 turret with 12 stations and speeds of up to 4,000 rpm for live tooling. The Y-axis enables off-center milling, drilling, and threading. Take advantage of this opportunity to purchase the HAAS ST-30Y horizontal lathe. Contact us for further information. • Chuck size: 10 inches (≈254 mm) • Maximum bar capacity (through spindle): 3 inches (≈76 mm) • Maximum swing over front apron: 31.75 inches (≈806 mm) • Maximum turning diameter: 13.75 inches (≈349 mm) with BMT65 turret • Maximum turning length: 32.5 inches (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 inches (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 Gedpsx D Iixefx Agyebi • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-center milling, drilling, and threading • Coolant capacity: 55 gal (~208 L) • Air supply requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195-260 V (depending on region) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment: • Live tool holders (under power) • Various tool holders • Liners

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 7.500 kg, skupna dolžina: 3.134 mm, skupna širina: 1.738 mm, vrsta vhodnega toka: trifazni, premer vrtljive mize: 1.200 mm, skupna masa: 3.000 kg, vrsta nastavitve višine: hidravlični, vrtilni moment: 6.350 Nm, varilni tok (maks.): 600 A, trajanje garancije: 12 meseci, Oprema: nožno daljinsko upravljanje, Hydraulically height-adjustable rotary tilt table Maximum load capacity: 7,500 kg Faceplate diameter: 1,200 mm Faceplate height: 900 mm – 2,084 mm (hydraulic adjustment) Faceplate height at 90° tilt: 710 mm – 1,894 mm Gbedpfjt Hfrcsx Agyoi Tilting range: 135° (hydraulic) Faceplate rotation speed: 0.04 – 1 rpm (electromotive) Operation: Handheld remote control and dual-pedal foot switch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, največja hitrost vretena: 5.000 obr/min, pomik osi Y: 100 mm, skupna višina: 2.080 mm, skupna masa: 8.500 kg, največja dolžina izdelka: 3.650 mm, število osi: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025 and features a maximum turning diameter of Ø230 mm and a length of 673 mm. It is equipped with a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, two 12-station turrets, and rapid traverses to ensure efficient operation. Ideal for complex turning applications. Contact us for further details about this machine. • Packaging: Original packaging • Capacity: • Swivel carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm • Motor (max/cont.) (1st/2nd): 22/11 kW (30/15 hp) • Torque (max/cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travel (X1/X2): 165/195 mm • Travel (Z1/Z2): 700/720 mm • Travel (ZB): 668 mm • Feed speed (X1/X2): 20/20 m/min (787/787 ipm) • Rapid traverse (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid traverse (Y): 7.5 m/min (295 ipm) • Rapid traverse (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): Linear guide • Turret: • Number of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type Gbodpfxjycvzbe Agyji • Driven tooling: • Milling tool speed: 5,000 rpm • Motor (max/cont.): 5.5/1.1 kW (7.4/1.5 hp) • Torque (max/cont.): 47/14 Nm (34/10 lbf ft) • Collet chuck size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubrication tank: 4 L (1.06 gal) • Power supply: • Electrical power: 60 kVA • Main cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Control: FANUC 31i-B Plus / SIEMENS 840D