Ultrazvočni podložke

ROMER /Ultrasoniczne Wanny ultradzwiękowe

Leto izdelave: 2020, stanje: novo, Ultrasonic cleaning machines for washing, phosphating, chromating, degreasing, and removing paint coatings Ljdpjfz Dtzsfx Aamoad Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to minimize heat loss and enable faster heating. Premium materials ensure a long service life for the vibrating components. Heating System The heating elements installed in ROMER tanks are made from top-quality materials and high-temperature-resistant ceramic components. The implemented heating system provides a high thermal efficiency; hot water automatically mixes with cold water, ensuring the entire tank is evenly heated. Ultrasonic Transducers The ultrasonic transducers used in ROMER systems are mounted in submersible modules, which enhance vibration transmission and are easily replaceable. The ultrasonic frequency range is 20–40 kHz, depending on the parts being cleaned—lower frequencies are used for large, high-strength components, while higher frequencies are used for jewelry, delicate mechanical assemblies, etc. All transducers are connected with high-temperature-resistant cables.

Stanje: novo, Leto izdelave: 2026, Recirculating chamber furnace, electric, new unit, delivery time 16 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters Lsdpfx Aaev Hg Euemoad - Control: Eurotherm Nanodac Controller/recorder with color touch display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy +/- 6 K in empty oven - Documentation, CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated, but only covered with stainless steel sheet. This allows unrestricted entry for all track gauges. Alternatively, the floor can be offered insulated (with entry rails to be specified by the customer). We offer new and used industrial furnaces, which we can also modify and customize to customer requirements. Oven, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, aging oven.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- Lajdpfxst Hw Sho Aamed lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Ljdpfx Ajh Dht Dsamoad Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/40°C, 118 kW at -10°C/40°C, 77 kW at -20°C/40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good We have a large selection of other refrigeration equipment available: condensing units, compressors, coolers, condensers, chillers, cold rooms, as well as refrigerated and catering furnishings, and machines and equipment for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker.

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Strip width: 600 – 2,000 mm Lajdpov S Ad Defx Aamsd Strip thickness: 6 – 15 mm Design: 4-Hi cassette

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Laodjhlp Efepfx Aamed

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), - RABLJEN - FIBER LASERSKI REZALNIK ZA CEVI S SISTEMOM ZA NALAGANJE/ODLAGANJE MIN. KROGLOVI PREREZ: ø 25 mm MAKS. KROGLOVI PREREZ: ø 355 mm MAKS. KVADRATNI PREREZ: 260 x 260 mm MAKS. PRAVOKOTNI PREREZ: 300 x 200 mm MAKS. DOVOLJENA OBREMENITEV: 100 kg/m VIR: IPG YLS-4000; 4000 W KRMILNA ENOTA: SIEMENS 840D TEŽA: 12.500 kg OPOMBA: AVTOMATSKO NALAGANJE 3-12,5 m; AVTOMATSKO ODLAGANJE 12,5 m; 3D REZALNA GLAVA; KAPACITIVNI SENZOR; AVTOMATSKA NASTAVITEV Lsdpfx Aajx E Eihomoad

Stanje: novo, Nastavitev skupnega časa Regulacija hitrosti s frekvenčnim pretvornikom Samodejno izpraznjevanje Lasdpfx Aaouu Rkaomjd Vakuum 0–95 % Filter vakuumskega sistema Prostornina: 500 litrov Dimenzije stroja v cm: Dolžina: 178 Širina: 102 Višina: 155 Električna moč: 3 kW

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Rabljeni CNC preklopnik Ras 62.25 Model: 62.25 Proizvajalec: Ras Leto izdelave: 2012 CNC preklopnik RAS 62.25 Ljdpfx Aen Tnzfsamoad Kapaciteta: 2540 mm x 2,5 mm CNC avtomatski stroj za krivljenje (leto 2012) Opremljen s kontrolno enoto System 6000 na dotik (zaslon nedavno zamenjan) 3,2-metrski merilnik zadnjega roba v obliki črke J Dvojno nožno stikalo za upravljanje Svetlobne zavese MACHINE GUARD SOLUTIONS Priložena segmentirana in ravna orodja

Stanje: skoraj kot novo (rabljeno), Manufacturer: Varian Model: NHS-35 Condition: The pump is in very good condition and, if required, is also available with angle valve! Warranty: 3 months Lodshmba Ajpfx Aamead Delivery time: ex stock