Stiskalnica za male serije

Hidrobrasil Doppelständerpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, stiskalna sila: 400 t, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Gsdpfx Aoph Uk Nsgyebi Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: novo, Capaciteit, mm ----- 25 x 2 mm Min/max buigradius ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Godega T Exopfx Agyebi Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaitijd buigkop ----- 0,75 sec Standaardcomponenten volgens VDMA-, ISO- en DIN-normen. OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie-/botsingcontrole * Verlenging van bedlengte

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 20 t, Double-column press, 20-ton capacity a) Closing speed up to 10 mm/sec b) Opening speed up to 30 mm/sec c) Table size between columns: 1400x1100 mm d) Ram size between columns: 1400x1100 mm e) Manual lubrication (via grease nipples) Gsdpehmbhqjfx Agyebi f) UKF recirculating-cooling-filtration system (electric cooling) g) Pressure setting from 4 T to 20 T (adjustable via rotary knob) h) Stroke adjustment via sliding control Design Press type: Double-column press, hydraulic Thermally neutral: 80–120°C Number of operator sides: 1 side Forces Pressing force max.: 200 kN Free return force max.: 20 kN Pressure build-up time (closed tool, steel-on-steel): max. 4 sec. Dimensions Max. opening width: 500 mm Stroke: 300 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 2,800 mm Minimum hall height: 3,500 mm Parallel deviation (at 20°C): #ERROR! mm Deflection Measured at max. closing force with 2/3 occupancy: ≤ 0.4 mm/m Weight Total weight of the press without operating fluids: approx. 3 t Table cut-out size: 1100x850 mm Speeds Rapid closing speed: 9 mm/sec Pressing speed: 9 mm/sec Sound pressure Sound pressure level, measured at 1.5 m height at control panel per DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press/travel cylinders: 2 pcs. Operating pressure: max. 280 bar Pressure build-up time (presses): 3–5 sec. Pressure accuracy during pressing stroke: +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 l/min Oil volume: approx. HLP 46 D 150 liters Ambient temperature: max. 40°C Oil temperature: max. 55°C Flow temperature: °C Cooling circulation pump ACS approx. 6.5 l/min Electrical Main supply: 400 V AC Control voltage: 24 V Frequency: 50 Hz Hydraulic motor connection: Main motor 3 kW Total connected load: approx. 5 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.000 mm, dolžina mize: 600 mm, 40T H-Frame Press with Ram Table, Calibration Press • Press Capacity: 6-40 t (adjustable) • Maximum Installation Height: 700 mm • Usable Area of Lower Table: 1000 x 600 mm • Usable Area of Ram: 1000 x 600 mm • Frame Type: H-frame • Guide Column Diameter: Ø 100 mm (4 pieces, at the corners) • Table Height from Floor: 800 mm • Overall Dimensions (W x D x H): approx. 2,100 x 1,600 x 3,500 mm • Total Weight: approx. 3,500 kg • T-slots and drilled holes can be customized according to customer specifications. HYDRAULIC CYLINDER: • Piston Stroke: 0-500 mm (adjustable) • Cylinder Diameter: Ø 140 mm (1 piece) • Piston Rod Diameter: Ø 80 mm (1 piece) • Working Pressure (max.): 260 bar • Return Speed: 90 mm/sec • Ram Speed: 9 mm/sec • Idle Speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic Pump (Brand: ASC): 67+8 L/min (1 piece) • Motor Power: 4 kW (1 piece) • Pressure accuracy during pressing: +/- 5 bar • Hydraulic unit is mounted at the top rear of the press • Hydraulic manifold and valves by DUPLOMATIC • Pressure is displayed with a manometer • Air and oil filters by FILTREC • Equipped with electronic oil level switch • Air cooling (cooler) used for hydraulic cooling • Pressure adjustable via pressure switch • Control via sensor • Protective cover (door) on the rear of the press • Safety light sensors and internal lighting included ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW • Total connected load: approx. 6 kW CONTROL CABINET EQUIPMENT: Gbodpoxrby Hjfx Agysi • Protection class: IP 54 • Spare capacity: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Operating mode switch: Yes (lockable) • Electrical components by SIEMENS, ALLEN BRADLEY, SICK.

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X-axis travel: 600 mm Godpfek Hdu Dsx Agyjbi Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle speed range: 63 – 3,150 rpm Stepless feed rate: 12–3000 / 6–1500 (Z) mm/min Quill stroke: 100 mm Head swiveling range: +/- 90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with linear control, mechanical handwheels, rotary tilting table +/- 45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Stanje: novo, Leto izdelave: 2024, Tünel tipi parça yıkama makinesi; metal ve plastik parçalar için tasarlanmıştır. Otomotiv, gıda, metal işleme, sac, plastik kasa gibi farklı sektörlerde kullanılmaktadır. Godpfed I Azvex Agyebi Çalışma Prensipleri İş parçası, bantlı konveyör aracılığıyla tünelin içerisine girer; konumlandırılmış nozullar, iş parçasının her bölümünü yıkar. İş parçası tünelden geçerken, basınçlı ve ısıtılmış su + kimyasal karışımı ile yıkanır. Bu yıkama işlemi sırasında yüzeydeki tüm yağ, talaş ve diğer endüstriyel kirleticiler temizlenir. Tünel yıkama makineleri, INTERSONİK mühendislik departmanı tarafından hem standart hem de uygulamaya özel olarak tasarlanır. Yıkama İşlem Akışı Yıkama, pasivasyon ve kurutma, Intersonik Proses Mühendisleri tarafından istenilen sonuçlara göre, çevre dostu Intersonik kimyasalları destekli olarak özel olarak tasarlanır. Çalışma Süreci ► Ön yıkama ► Ana yıkama ► Durulama ► Pasivasyon ► Kurutma Uygulama Alanları ► Otomotiv endüstrisi ► Askeri savunma sanayi ► Gıda sektörü ► Seri üretim ve bakım amaçlı tüm imalat endüstrisi ► Metal mobilya endüstrisi Konveyör, ihtiyaçlarınıza ve iş parçasına göre INTERSONİK tarafından özel olarak tasarlanıp imal edilir. Konveyör hızı ayarlanabilir. Otomatik sıvı dolumu standarttır. Elektrikli ısıtma standarttır; ısı eşanjörü ve brülörlü ısıtma seçenekleri mevcuttur. Tüm veriler dijital ekranlar aracılığıyla görülebilir ve kontrol edilebilir. PLC kontrolü opsiyoneldir. Tüm sıvı tankları, ısı kaybını önlemek için izole edilmiştir. Buhar toplama vakum pompası ve ünitesi standarttır. Diğer opsiyonlar ve detaylar için lütfen bizimle iletişime geçin. tünel yıkama, otomatik yıkama, otomotiv parça yıkama, metal yıkama, parça yıkama makinesi, yağ alma, sprey yıkama, basınçlı yıkama makinesi

Stanje: novo, premer gredi: 80 mm, - Section bending machine - Shaft diameter: 80 mm - The two lower rolls are hydraulically adjustable - Three driven rolls - 2 digital displays - Brake motor - Usable in horizontal and vertical position - Mobile control panel - Emergency stop - Documentation Gbsdpfx Aeucqquogyji - 400V

Stanje: novo, stiskalna sila: 100 t, hod: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm Gjdpogp Dc Refx Agyobi - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment Gbodpfx Agsgpxc Seyoi - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Godpfocxxx Hjx Agysbi Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t