Proizvodna stiskalnica

Hidrobrasil Doppelständerpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, stiskalna sila: 400 t, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Gbedpfxoph Uk Ns Agyji Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Gjdpfx Asb Tdquegyebi Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 1.000 mm, dolžina mize: 600 mm, 40T H-Frame Press with Ram Table, Calibration Press • Press Capacity: 6-40 t (adjustable) • Maximum Installation Height: 700 mm • Usable Area of Lower Table: 1000 x 600 mm • Usable Area of Ram: 1000 x 600 mm • Frame Type: H-frame • Guide Column Diameter: Ø 100 mm (4 pieces, at the corners) • Table Height from Floor: 800 mm • Overall Dimensions (W x D x H): approx. 2,100 x 1,600 x 3,500 mm • Total Weight: approx. 3,500 kg • T-slots and drilled holes can be customized according to customer specifications. HYDRAULIC CYLINDER: • Piston Stroke: 0-500 mm (adjustable) • Cylinder Diameter: Ø 140 mm (1 piece) • Piston Rod Diameter: Ø 80 mm (1 piece) • Working Pressure (max.): 260 bar • Return Speed: 90 mm/sec • Ram Speed: 9 mm/sec • Idle Speed: 80 mm/sec HYDRAULIC UNIT: • Hydraulic Pump (Brand: ASC): 67+8 L/min (1 piece) • Motor Power: 4 kW (1 piece) • Pressure accuracy during pressing: +/- 5 bar • Hydraulic unit is mounted at the top rear of the press • Hydraulic manifold and valves by DUPLOMATIC • Pressure is displayed with a manometer • Air and oil filters by FILTREC • Equipped with electronic oil level switch • Air cooling (cooler) used for hydraulic cooling • Pressure adjustable via pressure switch • Control via sensor • Protective cover (door) on the rear of the press • Safety light sensors and internal lighting included ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW Gbjdpsxrby Hjfx Agyei • Total connected load: approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Spare capacity: 30% • Cooling: Yes (air cooling) • Internal lighting: Yes • Operating mode switch: Yes (lockable) • Electrical components by SIEMENS, ALLEN BRADLEY, SICK.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, stiskalna sila: 160 t, Hydraulic 160 T double-cylinder insertion press Double-column press – two-cylinder press with 160 T capacity at 250 bar. a) Idle downstroke speed: 9.8 mm/sec b) Upward stroke up to 15.0 mm/sec c) Table size: 1500 x 600 x 100 mm, height-adjustable Gbjdpogz H Dhjfx Agyei d) Ram plate: 1500 x 600 x 100 mm e) Year of manufacture: 12/2020 f) Motor power: 11 kW g) Pump capacity: 22 L/min h) Stroke limitation via cam switch i) Open height: 700 mm j) Ram stroke: 500 mm k) Remote operation via two-hand control l) Pressure adjustment via rotary knob from approx. 30 to 160 T m) Approx. height: 2,800 mm n) T-slots per customer specifications o) Weight approx. 4,200 kg p) Oil tank capacity: approx. 200 L q) Painted in RAL 5005 (royal blue) or per customer request r) For safety reasons, the ram plate is painted orange (RAL 2009) or signal yellow (RAL 1023) s) Assembly, commissioning, and training available upon request for a separate charge. The stroke travel can be adjusted via cam switch. The ram/table size of the machine shown is 1600 x 600 x 100 mm.

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Gjdpod Hy Elofx Agysbi Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: novo, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will prepare an attractive offer including installation and service. Over the past years, ISGEC has supplied to more than 26 countries, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your enquiry. Gedpfx Agjf Rt Iroyjbi

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, Točkovni varilni stroj tip KAP10 CE certificiran Upravljanje: stoječa izvedba Moč pri 50% ED: 10 kVA, neprekinjena moč: 7,1 kVA Varilna zmogljivost: 1,5 + 1,5 mm jeklena pločevina Konstrukcija transformatorja: Gbjdekwcbyepfx Agysi - Primarno navitje: bakrena žica - Sekundarno navitje: bakrena fleksibilna folija - Jedro: silicijevo-jekleno jedro tipa EI Priključek na omrežje: 220V/400V (50Hz) Zaščitna varovalka: 220V-40A / 380V-25A Nivo moči: 5 Dolžina roke: 500 mm Premer roke: 40 mm Elektrode: nastavljiv hod elektrode Napajalni kabel: 3 m Zaščitni razred: IP21 Potrebni prostor (Š/D/V): 380 mm x 1000 mm x 1050 mm Teža: 110 kg Garancija: 1 leto (+10 let podpora rezervnih delov)

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Gjdpetiwgiofx Agyebi Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, delovna širina: 1.100 mm, skupna masa: 1.300 kg, širina obdelovanca (maks.): 600 mm, priključek za stisnjen zrak: 6 letvica, najv. debelina pločevine: 40 mm, število prejšnjih lastnikov: 1, vrsta nastavitve višine: električni, dolžina mize: 3.000 mm, višina mize: 850 mm, širina mize: 600 mm, trajanje garancije: 3 meseci, Mode of operation: dry Application description: Deburring of steel and stainless steel components Gjdpfx Ajw U A Dmsgysbi Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating instructions: 1x manual Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design, each with 6 tools, drive power 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (highly wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with start-up switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit locking, belts replaced – machine is fully operational and in very good technical condition. Set according to manufacturer’s specifications/standards. Sale includes a mechanical functional warranty of 3 months from delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Performance: 225 t/24h, mold carriers: 42, mixing positions for additive blending: 10, mixing head type: MQ, max. working pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid fill foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Gbodpfsttbd Njx Agyei