Cevna linija

Metal Coil Laser Cutting Line GS-3015CF 3kw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Technical Specifications: • Programmable guillotine cutter, • Automatic straightening unit, • Sectional roller shears, • Labelling system, • Outfeed conveyor belt, • Control panel, • Useful sheet width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, Todowi Twhspfx Abgef • Blade type: stainless steel.

Stanje: zelo dobro (rabljeno), MEMBRANE PRESS For laminating MDF panels with PVC, PP, and PET with VARIOPIN fully automatic underlay system Todpfx Ajrwxz Robgof Automatic front loading/unloading and preparation table (double tray cart 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions (mm): 1500 x 2800 Usable working area (mm): 1250 (or 2 x 600) x 2550 Front loading width from 1500 mm (usable width 1250 mm) Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC Touch Panel Total installed power: approx. 50 kW OPTIONAL "Paternoster" roller magazine Unwinder (roll holder) with coating film cutting system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna višina: 13.450 mm, skupna širina: 4.135 mm, skupna dolžina: 3.092 mm, nosilnost na odsek shranjevanja: 400 kg, vhodna napetost: 400 V, nosilnost: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13.450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of Manufacture: 2016 Total Load Capacity: 2 x 30,000 kg Load per Tray: 400 kg (evenly distributed) Tray Dimensions: 3625 x 815 mm Number of Trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle Dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power Supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid subject to prior sale. Technical details per Logimat unit: - Maximum total capacity of the Schäfer Logimat: 2 x 30,000 kg - Maximum number of trays (approx.): 91, each 400 kg, evenly distributed - Tray dimensions: 3625 x 815 x 100 mm Todperu A Atjfx Abgef - Tray dead weight: 70 kg - Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm - System footprint (approx.): 12.8 m2 - Capacity with 91 trays: approx. 269 m2, each tray approx. 2.95 m2 - Average tray retrieval time: 26 sec - Maximum tray retrieval time: 26 sec - Average tray changeover time: 51 sec - Maximum tray changeover time: 72 sec - Machine weight without trays: 5,200 kg - Equipped with LogiTilt - Equipped with LogiPointer - Equipped with LogiGate - Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if desired. Photos and videos of operation and dismantling are available on request via email. Price: special export price Price: excl. VAT Delivery time: in stock We have 3 Schäfer Logimat units in stock. Machinehandel De Leeuw BV specializes in used paternoster systems from manufacturers such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Leto izdelave: 2020, Električni stroj za izdelavo kolen je naprava za oblikovanje kolen iz okroglih in pravokotnih cevi različnih premerov. Stroj za izdelavo kolen EEM-200plus predstavlja izboljšano različico stroja EEM-200. Dodatno ima četrto spodnjo stiskalno orodje, kar omogoča stiskanje cevi z vseh štirih strani med upogibanjem in zagotavlja boljšo kakovost kolena. Naš stroj lahko uporabljate tako za delo z okroglimi kot pravokotnimi cevmi. Stroj za izdelavo kolen EEM-200plus omogoča obdelavo cevi s premerom od 80 do 200 mm. Pozor: Notranji premer cevi, ki jo uporabljate za upogibanje, mora biti 1 mm večji od premera matrice stroja za upogibanje! Zaklep cevi mora biti zaprt ali zavaran, da se med upogibanjem ne odpre! Todjf Epznspfx Abgjf Stroj za izdelavo kolen EEM-200 je električen in za delovanje ne potrebuje zračne ali oljne napeljave. Poraba električne energije znaša 1,5 kW/h. Potrebna napetost je 380 V. Uporaba stroja je možna v okoljih s temperaturo od -5 do +45 stopinj Celzija. Stroj za izdelavo kolen je primeren za upogibanje cevi z največjo debelino do 0,8 mm. Stroj EEM-200plus omogoča upogibanje kolen s pomočjo posebnih stiskalnih orodij. Za vsak premer cevi je potreben en komplet stiskalnega orodja. Če želite upogibati cevi različnih premerov, morate dokupiti dodatna stiskalna orodja. Ob nakupu stroja prejmete štiri komplete stiskalnih orodij, tako da lahko upogibate do štiri premera cevi v razponu od 80 do 200 mm (izbira premerov po vaši želji).

Stanje: novo, Leto izdelave: 2025, Compact Concrete Batching Plant PROMAX C60-SNG L (60m³/h) Type: Compact concrete batching plant with single-shaft mixer Capacity: 60 m³/hour of freshly mixed concrete Tedpfeflz Hfex Abgof Mixer capacity: 1500/1000 liters (1m³ of compacted concrete) Central lubrication system brand: ILC (Made in Italy) Control system: Fully automatic PC - PLC - printer Electrical equipment: Siemens Other equipment and accessories: Italian origin Unlimited user accounts and remote access Very low transport costs: Two containers Plant installation and commissioning are our responsibility We offer excellent after-sales service 24/7 SUPPORT SERVICES Export of more than 1,000 concrete batching plants to over 90 countries worldwide * LOW SHIPPING COSTS (two 40F-OT containers or two standard trailers) * FAST INSTALLATION * SIMPLE AND EASY OPERATION

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter Todpfx Absfgyh Ujgsf • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 - 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 - 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Tsdpsuc Shuefx Abgsf Speed: max. 100 m/min Working direction: left → right Line Composition: Uncoiler End shear Welding table Edge trimming shear with scrap chopper Scrap conveyor Strip edge preparation Entry table Forming unit Inner/outer scraper Cooling section Sizing section Testing unit and length measurement Cutting to length Ejecting station for defective pipes Blow-out station Oiling station Bundling station Strapping station Bundle removal Electrics

Stanje: rabljeno, Leto izdelave: 1973, številka stroja/vozila: 20591, Roller diameter: 500 mm Throat depth: 1050 mm Workpiece height: 400 mm Voltage: 400 V Tedpfxjcxxr Ej Abgsf Table size: 750 x 800 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Space requirement approx.: 2.4 x 1.0 x 2.2 m Bandsaw in heavy-duty cast-iron construction, equipped with a stepless variator gearbox and 4 preselectable gear stages. Cutting speed adjustable: Stage 1: 15–79 m/min, Stage 2: 67–305 m/min, Stage 3: 207–940 m/min, Stage 4: 2350 m/min! Band tensioning device, worktable tiltable +/- 40°, rear auxiliary table, various bandsaw blade guides, blade grinding device, work light, foot switch, accessories.

Stanje: dober (rabljeno), Leto izdelave: 2004, Spindle clearance: 60 mm Turning length: 280 mm Control: Siemens 840 D Main spindle speed: 6,300 rpm Drive power - spindle motor: 3.3 kW Turret 1: disc turret Number of tools in turret 1: 8 Tool system: DIN 69880 / 25 mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5,500 N Rapid traverse: 24 m/min Drive power - milling spindle: 5,000 kW Turret 2: dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Machine weight approx.: 2.5 t Required space approx.: 6.0 x 2.0 x 2.0 m The INDEX ABC machine is a compact CNC lathe designed for short turning parts from bar stock. It features a slant-bed design with two independent turrets. The upper turret is primarily intended for internal machining and cutoff-side operations, while the lower turret is used for external machining. This turret arrangement ensures collision-free operation and easy programming with high tool availability. The large working area allows for optimal chip evacuation. The machining area includes two turrets: "Turret 1" - Disc turret with 7 radially arranged toolholders Ø 25 mm DIN 69880 and one mounting point for a reinforced synchronous spindle at station 8. With an adapter, tools with 1" mountings can also be used. The turret head is prepared for the V-guide bar system. - Synchronous spindle for rear-side machining, enabling parallel simultaneous machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back boring unit. Starting from the work spindle center in a clockwise direction, 3 stationary back boring tools are arranged. These are positioned on the pitch circle of the synchronous spindle. Rear-side machining takes place simultaneously with the main spindle machining. Additionally, two more tools can be mounted and can be equipped with live tooling. Tsdpfx Aewbvhaebgef "Turret 2" - Turret with 6 symmetric dovetail mounts, each station featuring 2 holes for cylindrical shank tools. The following tool systems can be used: - Static tools, which can be shifted in the Z direction - Driven tools with cylindrical shank Ø25 (two positions per station) - Including bar feeder LM 3200 - + various accessories (various Ø guide half-shells/toolholders) Technical Data: - Bar stock diameter: (Ø 25 / Ø 36 / Ø 52): --> round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagonal SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Max. bar length: 3,200 mm --> From Ø 25 mm bar, min. 2,500 mm --> Up to Ø 25 mm bar, min. 1,500 mm --> Bar support = ca. 300 = 6 bars Ø 52 mm Weight (bar loader) = 700 kg

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 500 mm, merilno območje os Z: 300 mm, Visio 500 optična/taktilna 3D merilna naprava 453 (400 X, 500 Y, 300 Z) pomično območje. Merilna programska oprema: PC-DMIS CAD verzija 2015 Menjalnik za sonde s 6 mesti, skupno z 2 moduli TESASTAR MP Silent PC Big Tower z Windows 7 (vse je nameščeno in deluje) Kamera z 200-kratnim optičnim zoomom z obročasto/koaksialno osvetlitvijo in prehodno svetlobo (diascopsko) Vse popolnoma deluje. Y-os ima rahle praske. So bile zbrušene. To ne vpliva na funkcionalnost ali natančnost. Tjdpfx Ajiyymrebgef