Monoblok VVF14/3 Polnilna linija Steklenice

H & K Abfülllinie für Glasflaschen (Mehrweg)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Knsdpoyidvdjfx Ahcob Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: rabljeno, Leto izdelave: 2007, dolžina zabojnika: 40 čevelj, barva: zelen, skupna masa: 26.735 kg, lastna masa: 3.745 kg, prostornina tovornega prostora: 67,7 m³, širina tovornega prostora: 2.352 mm, dolžina tovornega prostora: 12.032 mm, višina nakladalnega prostora: 2.390 mm, Dear Sir or Madam, Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Shipping containers are wind- and watertight large-capacity units for transporting goods by sea, land, or air freight. The ISO-standardized containers can be loaded, unloaded, and stacked quickly and easily. _____ This listing is for a: 40-foot shipping container _____ Knodpfsh Hnagox Ahcob Our containers feature: ✅ Quality-inspected ✅ Valid CSC plate (container safety certification) ✅ Painted green (custom color available) ✅ Wind- and watertight ✅ Odor-neutral _____ Container dimensions: External: L 12192 mm x W 2438 mm x H 2591 mm Internal: L 12032 mm x W 2352 mm x H 2395 mm Door opening: H 2340 mm x W 2292 mm Volume: 67.7 m³ Euro pallets: 25 Additional specifications: Tare weight: 3,745 kg Payload: 26,735 kg Gross weight: 30,480 kg Intended cargo: Dry cargo _____ ⭐ Extra services ■ Professional, free consultation ■ Transport and delivery with or without container unloading can be arranged for an additional fee ■ Steel frame, stainless steel walls, and aluminum floor ■ Custom paintwork possible (RAL colors) ■ Lighting installation and electrical equipment available ■ Access ramp on request ■ Container support legs available ■ Drivable with pallet jack and forklift _____ ■ Prices are net, excluding VAT ■ Inventory changes daily, please feel free to request a quote ■ Images shown are sample photos _____ If you have any questions or requests about containers, or if you would like a non-binding quote, please call us or send your inquiry. We also look forward to your visit to our container depot at the Port of Hamburg. _____ *Important notice: You can access the legal notice, information and link to the EU Commission’s online dispute resolution platform, our terms and conditions with customer information, privacy policy, cancellation policy, and sample cancellation form by clicking on “Legal Information.” This ad is intended solely as a basis for subsequent contract negotiations. It does not constitute a binding offer or invitation to submit such. If the product has aroused your interest, please send us a non-binding message by [email], [phone], [fax], or [letter] to the contact details listed under "Legal Information," or [via the “Send Message” function], including your [email address], [fax number], or [postal address]. We will then send you a binding offer together with our terms and conditions, cancellation policy, and sample cancellation form.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, CEVNA UHT STERILIZATOR ZA SOKOVE Knodpfsv Tl D Nex Ahcjb PROIZVAJALEC: KF ENGINEERING, NEMČIJA KAPACITETA: 11 TON NA URO PRIMEREN ZA VSE VRSTE SOKOV, VKLJUČNO S PARADIŽNIKOM NAJVIŠJA TEMPERATURA: 124 °C KRMILNI SISTEM: PLC SIEMENS-7

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Diameterbereik: 99 mm - 180 mm Hoogtebereik: 90 mm - 250 mm Kodpfxst Dhv Ss Ahcenb Koppen: 3 Capaciteit: tot 90 blikken per minuut Gereedschap afgestemd op ca.: 153 mm

Stanje: rabljeno, Glass bottle filling line for hot filling of smoothies. Consisting of the following components: - Unpacking table - Bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type "VW 24/1") Knedpfx Ahswgc R Esceb - Flash pasteurizer - Pressure tank - Capper (Marchesini, type "ML667") - Cap sorter - Tunnel cooler - Blower - Cap inspection (BBull CIS) - Labeller (Anker, 1999, type "Roland 10/4") - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler Machine (additional): Hot filling, with pasteurization Capacity: 5,000 bottles/h Formats: 0.25-litre bottles, twist-off caps Equipment: Unpacking table, rinser, vacuum filler, flash pasteurizer, pressure tank, capper, cap sorter, tunnel cooler, cap blower, cap inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni parni kotel ----- - z valovito kuriščnim cevjo in izbočenimi dnom - Kedpfxextndnj Ahcenb Proizvajalec: STANDARD Greta površina pribl.: 240 m² Zmogljivost: 13,4 t/h Najv. obratovalni nadtlak: 14,0 bar Preizkusni nadtlak: 18,2 bar Vsebina vode pribl.: 18.160 l Leto izdelave: 1988 Opremljen z zemeljskim plinskim gorilnikom Saacke tip DG 80, plinsko regulacijsko lino, krmilno omaro, napajalno črpalko za vodni dovod in prisotnimi grobimi in finimi armaturami.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L23001388, skupna masa: 208 kg, kapaciteta rezervoarja: 14 l, vrsta hlajenja: voda, vhodna napetost: 380 V, Semi-industrial machine designed for kneading dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to the production of short-cut pasta, long pasta, and pasta sheets from dough. Suitable for medium-scale pasta production as well as for supplying dough sheets to cutting machines or nest formers. All parts in contact with the dough and the entire frame are made of stainless steel. The mixing paddles and auger are easily removable for cleaning. The machine is equipped with an automatic cutter complete with a set of blades. Knjdpfx Asw Av Snshceb Additionally, I have a brand new penne pasta production kit for sale (2,200 euros).

Stanje: rabljeno, Leto izdelave: 1995, Overview The "Sirio 7" bottle washer from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical Details • Capacity: up to 7,000 bottles/hour • Bottle cells designed for 1.0-liter bottles (smaller bottles can also be run; additional guide plates are required) • Bottle diameter: 78 – 90 mm • Bottle height: 288 – 310 mm • Bottle cells per row: 10 Kedpjtrbrqefx Ahcjnb • Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm • Empty weight: 14,300 kg • Full-load weight: 25,600 kg • Installed power: 20.85 kW • Heating system: steam, 3 bar

Stanje: rabljeno, Stretch blow moulding machine by Etek ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles from PET preform blanks Stretch blow moulding machine for rotary table production Manufacturer: ETEK / GF-Industries, Model Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Kodpfxskucxle Ahconb Power rating: 90 kW Power supply: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Stanje: rabljeno, Vertical multistage high-pressure centrifugal pump GRUNDFOS Like-new pump, but a part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Knsdpefupadsfx Ahcjb Power supply: 400 Volt, 50 Hz Power: 3 kW - Pump design in 9 stages - Made from stainless steel 1.4401 - The nearly new pump has been used as a parts donor, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and dewatering Packed in the original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Total weight with shipping crate: 85 kg Condition: As new Not a submersible or immersion pump