Vodilno/vlečno vreteno stružnica od 1000 mm premera struženja nad ležiščem nakup rabljenega (88)

Stanje: novo, Leto izdelave: 2025, Premer struženja nad posteljo: 554 mm Iodpfx Afjx Urtrj Toal Premer struženja nad suportom: 370 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Premer vretena: 104 mm Pogonska moč: 11 kW - Nova stroj - s 3-osnim digitalnim prikazovalnikom ACU-RITE vključno s konstantno hitrostjo rezanja, hitromenjalnim držalom za orodje MULTIFIX velikosti MC in povišano zaščitno steno proti brizganju z LED trakom * Za več informacij o natančni serijski opremi in razpoložljivih možnostih obiščite našo spletno stran ali nas pokličite *

Stanje: novo, Condition new Delivery time approx. 4 months from order Country of origin Bulgaria Price €131,720 Leasing rate €2,489.51 Swing over bed 1,020 mm Distance between centres 2,000 mm Centre height 510 mm Spindle bore 358 mm Swing over cross slide 770 mm Bed width 560 mm Spindle taper 361 M Number of spindle speeds 12 Spindle speed range 6.3 - 3 1/min Number of feeds 2 Longitudinal feed 0.039 - mm/rev Cross feed 0.02 - 7.5 mm/rev Number of threads 76 Metric thread range 0.5 - 0 mm Inch thread range 60 - 1/5 TPI Module thread range 0.125 - 37.5 DP thread range 240 - 4/5 Cross slide travel 505 mm Top slide travel 270 mm Tailstock quill diameter 105 mm Tailstock taper 6 MT Tailstock quill stroke 225 mm Motor power 18.5 kW Weight 6,400 kg The primary purpose of this type of lathe is pipe machining. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes offer substantial capabilities for threading connections on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping pipes with double chucks and the provided pipe supports allow the machining of extra-long pipes. Suitable both for assembling components and systems for the oil and transmission industries, as well as for maintenance work on such plants. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra Type D1, Multifix-compatible system incl. 4 holders (3 rectangular, 1 round) 2 pcs. Bison 3295 3-jaw chucks, Ø 660 mm, mounted on both spindle sides max. 250 rpm, clamping range 5 - 400 mm (Option: special hard external jaws clamping range 80 - 400 mm) 2 pcs. steady rests on pedestals, Ø 160 - 360 mm, with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning device Coolant system Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Iasdpswiq Drofx Af Tol Tailstock Reducer sleeve for tailstock quill Mechanical tailstock movement with handwheel Low-voltage machine lamp Operating manual Equipment according to CE standards Other models with spindle bores from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm available on request.

Stanje: dober (rabljeno), Leto izdelave: 1992, Premer struženja nad ležiščem: 1000 mm Premer vretena: 128 mm Ijdpfjx T Dbfjx Af Tjal Dolžina struženja: 8000 mm Skupna potrebna moč: 22 kW Teža stroja pribl.: 20 t

Stanje: rabljeno, Leto izdelave: 1952, Technical Details: Swing diameter over bed: 1000 mm Swing diameter over slide: 520 mm Turning length: 2500 mm Slide travel Z-axis, saddle: approx. 500 mm Slide travel Z-axis, top slide: approx. 300 mm Center height: 300 mm Spindle bore: 90 mm Speed range: 3.2 - 382 / 22 steps rpm Feed range X-direction, longitudinal: 0.213 - 2.67 / 36 steps m/min Feed range Y-direction, cross: 0.070 - 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Ijdpfou Tq U Ijx Af Tjal Total power requirement: 22 kW Machine weight approx.: 8.2 t Machine dimensions approx. LxWxH: 5.3 x 1.6 x 1.6 m Transport dimensions approx.: 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-position tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Stanje: dober (rabljeno), Leto izdelave: 1980, premer struženja nad ležiščem sani: 1.040 mm, premer struženja nad zgornjim sanežem: 710 mm, stružna dolžina: 2.000 mm, širina postelje: 600 mm, Mandrin optional Ø 1200 mm Affichage numérique RSF 2 axes Dispositif de tournage conique Alésage de broche 130 mm Lubrification centralisée Longueur de tournage : 2000 mm Diamètre de tournage au-dessus du banc Ø : 1040 mm Diamètre de tournage au-dessus du chariot transversal : 710 mm Diamètre de tournage dans le rompu Ø : 1780 mm Longueur du rompu : 1000 mm Alésage de broche : 130 mm Largeur du banc : 600 mm Diamètre de la contre-pointe : 130 Ø Course de la contre-pointe : 300 mm Iasdpfex Tgr Tjx Af Tol Nez de broche : 6 cône Morse Puissance : 22 kW Vitesse : 600 tr/min Avance axe X : 4000 mm/min Avance axe Z : 4000 mm/min Longueur : 6000 mm Largeur : 2100 mm Hauteur : 2100 mm Poids : 8300 kg Veuillez noter : Les informations contenues sur cette page ont été collectées au mieux de nos connaissances et, dans la mesure du possible, obtenues auprès du fabricant. Les informations sont données de bonne foi mais leur exactitude ne peut être garantie. Elles ne constituent donc pas une garantie ou une condition contractuelle. Nous vous recommandons de vérifier toutes les informations essentielles.

Stanje: rabljeno,

Stanje: dober (rabljeno), Premer nad posteljo: 1250 mm Iasdsvprffepfx Af Tsl Največja dolžina obdelovanca: 10.000 mm Največja masa obdelovanca pri obdelavi med konicama z luneto: 10.000 kg Višina vpetja rezalnega orodja v nosilcu orodja: 50 mm

Stanje: novo, Condition: new Country of origin: Bulgaria Price: €115,600 Leasing rate: €2,184.84 Swing diameter over bed: 1,090 mm Distance between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN55027: size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Iaedewiqv Ujpfx Af Tjl Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Inch thread range: 60 - 1/16 TPI Module thread range: - Cross slide adjustment range: 525 mm Top slide adjustment range: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill stroke: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive type: geared headstock 3-axis digital readout Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3 x rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip guard along entire length Lead screw and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Reducer sleeve for tailstock quill Tailstock movement by electric motor Low-voltage machine lamp Operating manual Equipment according to "CE" ADDITIONAL TURNING LENGTHS: Turning length 1,500 mm €101,220.00 Turning length 2,000 mm €104,720.00 Turning length 4,000 mm €123,610.00 Turning length 5,000 mm €134,700.00 Turning length 6,000 mm €151,230.00

Stanje: dober (rabljeno), Leto izdelave: 1993, Premer struženja nad ležiščem: 1000 mm Prehod vretena: 128 mm Iasdpox T A Ahsfx Af Tel Dolžina struženja: 5000 mm Skupna potrebna moč: 22 kW Teža stroja cca.: 16 t Potrebni prostor cca.: 7,8 x 2,3 x 1,8 m

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, skupna dolžina: 5.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, skupna masa: 12.300 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B/4M has undergone a comprehensive rebuild and modernization by us. It features technical parameters that comply with the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: complete overhaul made to order, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 4000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg Ijdpfxoflaxve Af Tjal - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 6500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12,300 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: dober (rabljeno), Leto izdelave: 1988, premer struženja nad prečnim suportom: 900 mm, izvrtina vretena: 105 mm, premer struženja: 1.200 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.000 mm, skupna širina: 1.800 mm, skupna višina: 1.550 mm, širina postelje: 650 mm, teža obdelovanca (maks.): 10.500 kg, Motorizirani konjiček CE zaščita za vpenjalno glavo Teleskopski pokrov vodil Stacionarno držalo (luneta) 4-čeljustna vpenjalna glava, premer 1000 mm 3-čeljustna vpenjalna glava, premer 500 mm Dvoosni digitalni merilni sistem Dolžina struženja: 5000 mm Premer struženja nad posteljo: Ø 1150 mm Premer struženja nad suportom: 850 mm Vretenina izvrtina: 105 mm Širina postelje: 650 mm Pinola: 140 Ø Iaedpfx Afjwrxpbe Tol Hod pinole: 300 mm Vpenjalni stožec vretena: 6Mk Število vrtljajev: 4,5 - 900/min Teža obdelovanca: 10.500 kg Dolžina: 8000 mm Širina: 1800 mm Višina: 1550 mm Teža: 13.800 kg

Stanje: generalkompletno obnovljen (rabljeno), Centre height: 1000 mm Swing over bed: 2000 mm Turning diameter: 1600 mm Turning length: 10,000 mm Spindle bore: Ø 105 mm Main motor power: 71 kW Maximum spindle torque: 40,000 Nm Chuck plate diameter: Ø 1600 mm Tool system: Turret head or slide rest – to be agreed upon Control system: Siemens / Sinumerik 840 D sl Number of spindle speeds: 3 Spindle speed range: 250 rpm (for 1600 mm chuck) Rapid traverse longitudinal / cross: 4000 mm Tailstock quill diameter: Ø 280 mm Tailstock quill travel: 200 mm Load capacity: Maximum workpiece weight between centers: 30,000 kg Maximum workpiece weight between centers with one steady rest: 35,000 kg With two steady rests: 40,000 kg Lathe dimensions and weight: height 2400 mm, width 3000 mm, length 15,700 mm (turning length + 5700 mm) Weight of TCF200 x 10 m lathe: 46,000 kg The lathe is currently undergoing advanced refurbishment. Iaedpfx Aen Up R Sjf Tsl The customer can inspect the lathe and the works on-site at the ZAK company in Poręba. IMPORTANT! The photos also show other lathes refurbished by our company (TCG, TCH300, TCE...) as well as new TRP and TRB lathes manufactured under the RAFAMET S.A. license.

Stanje: rabljeno, Leto izdelave: 1986, Technical details: Swing diameter over bed: 1000 mm Iedpsvgmlnefx Af Tjal Swing diameter over support: 745 mm Turning length: 3000 mm Speed range: 4.5 – 900 rpm Spindle bore: 110 mm Workpiece weight between centers, max.: 12,500 kg Total power requirement: 30 kW Machine weight approx.: 9 t Space requirement approx.: 5.2 x 2.3 x 2 m 3-axis digital readout Rapid traverse, cross slide travel 350 mm 1 fixed steady rest 1 faceplate, diameter 1000 mm Coolant system

Stanje: novo, Condition: New Country of Origin: Bulgaria Price: €122,250 Leasing Rate: €2,310.53 Swing Diameter over Bed: 1,320 mm Distance Between Centers: 3,000 mm Center Height: 625 mm Spindle Bore: 155 mm Swing Diameter over Cross Slide: 940 mm Bed Width: 700 mm Spindle Mount / DIN55027: Size 15 Spindle Taper: 160 M Spindle Speed Range: 5 - 1,000 rpm Number of Feeds: 160 Longitudinal Feed: 0.032 - 38.9 mm/rev Cross Feed: 0.016 - 19.45 mm/rev Metric Threads Range: 0.5 - 480 mm Imperial Threads Range: 60 - 1/16 TPI Module Thread Range: Cross Slide Travel: 685 mm Top Slide Travel: 270 mm Tailstock Quill Diameter: 125 mm Tailstock Taper: 6 MT Tailstock Quill Travel: 260 mm Iaodswiqwfspfx Af Tel Weight: 8,550 kg Drive via Gearbox 3-Axis Digital Display Fagor Quick-Change Tool Post Amestra, Multifix-style system incl. 4 holders (3 rectangular, 1 round) 3-jaw Chuck Bison 3204/DIN6350, Ø 500 mm Fixed Center Coolant System Full-Length Rear Chip Guard Lead and Feed Screw Cover Chuck Guard Tool Post Guard Leveling Bolts and Plates Reducing Sleeve for Tailstock Quill Tailstock Movement via Electric Motor Low-Voltage Machine Lamp Operating Manual CE-Compliant Equipment OTHER AVAILABLE TURNING LENGTHS: Turning Length 1,500 mm: €107,770.00 Turning Length 2,000 mm: €112,550.00 Turning Length 4,000 mm: €130,160.00 Turning Length 5,000 mm: €141,250.00 Turning Length 6,000 mm: €157,780.00

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm - Max workpiece length (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev Iajdpfsvvlxlsx Af Tjl - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/6M has been comprehensively rebuilt and modernised by us. It features technical specifications that match the documentation of a new machine, meets the technical acceptance standards of the WOT and the Polish Norm, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical data: - Centre distance/Turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm Iaedpfx Afskyt Hls Tsl - Powered top slide - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that match those of the technical and operational documentation of a new machine, complies with the WOT acceptance standards as well as Polish standards, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul, delivery time 3.5 months from placing the order. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Iajdpfxjv Ab Dqo Af Tol Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Rear safety guard along the entire machine length - Inverter including soft-start function and potentiometer for stepless speed control

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/5M has been completely overhauled and fully modernized by us. It features technical specifications in line with the technical and operational documentation of a brand-new machine, meets WOT technical acceptance requirements and Polish standards, and also complies with EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrics. Availability: in stock, powered-on, ready for technical inspection. Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Motor drive for top slide drawer for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and options - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers Iaodpfsva Elaex Af Tol - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, featuring extensive equipment as shown in the photos. Technical specifications: Iajdpfx Aev Epk Dof Tsl Swing diameter over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as depicted in the photos: 1 x 4-jaw chuck 3 x steady rests

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, Offered for sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest Iodpfx Afjv Epigo Tjal + various adapters

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/10M has been extensively rebuilt and modernized by us. It features technical specifications that are fully compliant with the technical and operating documentation of a new machine, meets the technical acceptance requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul upon order, delivery time 3.5 months from commissioning Technical data: - Centre distance/turning length: 10,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg Isdpfx Afsva Ebnj Teal - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3-jaw or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 12.900 kg, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/5M has been thoroughly rebuilt and modernized by us. Its technical specifications match those of a new machine’s technical and operational documentation, fulfill the acceptance criteria of WOT and Polish standards, and also meet EU requirements. The machine comes with a full 12-month warranty covering spare parts and electrical components. Iodpoi Apilofx Af Teal Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical Data: - Distance between centers/Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st/2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12900 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment at extra cost: - 3- or 4-jaw chucks, various diameters and variants - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolholder

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 14.100 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/6M has been extensively rebuilt and modernised by us. It features technical specifications that comply with the technical and operating documentation of a new machine, satisfies the technical acceptance conditions of the WOT and the Polish standard, and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from placement of order Technical data: - Centre distance / turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over support: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centres: 8,000 kg - Max. workpiece weight between centres + 1 steady rest: 10,000 kg - Max. workpiece weight between faceplate teeth + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm Isdpfx Asfhk Insf Teal - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 3.000 mm, skupna dolžina: 5.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, skupna masa: 11.400 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B/3M has been extensively rebuilt and modernized by us. It features technical specifications that fully correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from order placement Technical data: - Distance between centers / turning length: 3000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Iaodpfx Aody I I Ajf Tel Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Main motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: - Total length: 5500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 11400 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, including display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/10M has been comprehensively rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also complies with EU regulations. A full 12-month warranty on spare parts and electrics applies to the machine. Availability: custom general overhaul, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 10,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm - Maximum workpiece weight between centres: 9,000 kg Ijdpfskh Hbhex Af Tjal - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Length: 12,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chucks in various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost