Webo nakup rabljenega (23)

Stanje: rabljeno, Leto izdelave: 1970, Drilling capacity in steel (diameter): 32 mm Arm reach: 1,000 mm Maximum workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. m W E B O Radial Drilling Machine Model: BR 32 V Year of manufacture: approx. 1970 Serial No. _____ Drilling capacity in cast iron/steel (through solid): max. 40 / 32 mm Boring (with 50% pre-drilled): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 steps/stepless: 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal travel of drill carriage: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/rev Spindle drive approx.: 3 / 4 kW Lodpfx Ahot H Smyeueac Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and spindle housing via hand lever • Automatic drill feed with depth stop via vernier • Stepless speed adjustment within three gear steps and 2 motor speeds, changeable via hand lever • Clockwise and counterclockwise rotation • Electro-motorized vertical adjustment of the arm via cross-switch • Ammeter for the drilling motor • Coolant unit with integrated coolant pump • Fixed drilling table approx. 800 x 600 x 600 mm high, vise, etc. Ideal machine for steel fabrication, toolmaking, and mechanical engineering! Condition: Older but good to very good – demonstration-ready Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Lodpfx Ahet Hw U Nsujac Machine weight approx.: t Space requirement approx.: m

Stanje: zelo dobro (rabljeno), Drilling capacity in steel (diameter): 35 / 45 mm Throat depth: 330 mm Lajdpszd Hgpefx Ahujc Drilling stroke: 200 mm Morse taper: MT 4 Table diameter: 600 mm Spindle speeds – stepless: 80 - 1800 rpm Table adjustment upwards: 450 mm Spindle travel: 400 mm Total power requirement: 2.5 kW Machine weight approx. 1.4 t Space requirements approx. 2.5 x 1.2 x 0.8 m Automatic feed, coolant system

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, nosilec vretena: MK 1, največja hitrost vrtenja: 1.800 obr/min, globina grla: 200 mm, širina mize: 320 mm, dolžina mize: 250 mm, montažni premer: 80 mm, hod: 70 mm, Oprema: Na voljo je tipska ploščica, osvetlitev, Drilling machine, pillar drill, column drill - Manufacturer: Webo, G6 column drilling machine - Motor: 0.75 kW, 380 V, 50 Hz Morse taper MK-1 drill chuck Max. drilling diameter: M6 - Transmission: with flat belt drive Coolant pump Automatic/manual operation Spindle speed Ledjwzaqxopfx Ahueac - Table size: 320 x 250 mm - Spindle stroke: 70 mm - Throat depth: 200 mm - Column diameter: 80 mm - Dimensions: 450/600/H1800 mm - Weight: approx. 190 kg

Stanje: rabljeno, Ploščato polje, vpenjalna plošča s T-utori 8000 x 2100 mm, 2-delna Vpenjalna površina Dolžina: 8000 x Širina 2100 mm Debelina plošče: 360 mm Ledpfx Ahozc Nt Djueac - Sestavljeno iz 2 vpenjalnih plošč s 7x T-utori (Dolžina 4000 x Širina 2100 x Debelina plošče 360 mm) Transportne mere 2 plošči naloženi ena na drugo Ploščato polje Dolžina 4000 mm x Širina 2100 mm x Višina ca. 900 mm Transportna teža ploščatega polja ca. 14 ton Dobro stanje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 4-stopenjski menjalnik obrati od 180 do 2000 obratov/min moč motorja 0,75 kW omejevalnik globine vrtanja nastavitev gor/dol primež za doplačilo Lasdpfx Ahsyxcu Iouec

Stanje: rabljeno, Leto izdelave: 1974, Drilling capacity in steel (max. Ø 35 mm) Throat depth 1000 mm Workpiece height - max. 200 - 1400 mm Height adjustment 745 mm Clamping area of base plate 1200 x 930 mm Drill spindle diameter / taper 90 mm / MT 4 Drill spindle stroke 350 mm Speed range 60 - 1850 rpm Feed range 0.09 - 1 mm/rev Drive power 3.7 kW Machine weight approx. 3.7 t Space requirements approx. 2.1 x 0.9 x 3.3 m Cube table 800 x 800 x 650 mm Coolant system Laodpfx Ahstv Igtouec

Stanje: rabljeno, Technical details: Drilling capacity in steel (diameter): 30 mm Drilling stroke: 180 mm Drill spindle Morse taper: 4 x MT 3 Spindle lateral displacement: 310 mm Spindle spacing: 490 mm Number of drilling stations: 4 Spindle head adjustment: 300 mm (manual) Feed rate: 0.08 - 0.64 mm/rev (6 steps) Spindle speed: 50 - 1,215 rpm (19 steps) Distance spindle/table: max./min.: 500 / 200 mm Table surface: 1820 x 395 mm Table adjustment: height: 300 mm (manual) Total power requirement: 4 x 1.5 kW (6.0 kW total) Machine weight approx.: 2,800 kg Machine dimensions approx. LxWxH: 2.1 x 1.1 x 2.75 m Additional technical specifications: - Spindle center distance: 490 mm - Thread cutting on drill columns 3 and 4 with automatic reversing - All drill spindles feature right- and left-hand rotation - Spindle intermediate gear and variator - Equipped with coolant system Lajdpeu Idu Hsfx Ahujc

Stanje: rabljeno, Leto izdelave: 1966, Technical Details: Drilling capacity in steel (diameter): 63 mm Arm reach: 2000 mm Max. workpiece height: 1270 mm Lajdpsu Id Dbefx Ahujc Spindle taper MT: MT 5 Drilling depth: 400 mm (stroke) Quill travel: 400 mm Feed rate: 0.05 - 0.32 m/min Spindle speeds: 14 - 1000 rpm (40/50/63/160+200 without function) Column swiveling: 360 ° Electrical configuration - voltage/frequency: 380/50 V/Hz Base plate: 1900 x 950 mm Total power requirement: 13 kW Machine weight approx.: 7.9 t Required floor space approx. LxWxH: 3.9 x 1.5 x 3.4 m This radial drilling machine is equipped with an electric sliding table! Further features: - Distance spindle center to column: 360 - 2000 mm - Distance drill chuck to table surface: 1270 mm - Distance spindle to base plate: 1220 - 4520 mm - Drilling capacity in St 60: 63 mm at feed rate 0.32 - Drilling capacity in GG 22: 80 mm at feed rate 0.5 - Horizontal travel of drilling head: 1640 mm - Vertical travel of drilling head: 980 mm - Distance spindle nose to base plate: 430-1770 mm Equipment: - Coolant pump (not operational) - Steady rest - 1 electrically driven sliding table 1250 x 1000 mm, type TI 18 with digital display (machine interface) - incl. machine vice Currently, not all spindle speeds are selectable.

Stanje: rabljeno, Column-type box stand drilling machine WEBO Serial No: 132 Machine No: 9 Drilling capacity: 50 mm Spindle taper: MK 5 - long quill Throat depth: 430 mm Spindle stroke: 280 mm Drill head height adjustment: 500 mm Table size: Ø 725 mm Distance spindle to table: max. 740 mm Distance spindle to mounting surface on machine base: max. 1240 mm Spindle speed: 55-820 rpm Feed rate stage 1: 0.13 - 0.2 - 0.27 - 0.4 mm/rev Feed rate stage 2: 0.6 - 0.83 - 1.17 - 1.8 mm/rev Column diameter: 300 mm Motor power: 2.8 / 3.6 kW, pole-switchable Power supply: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and stepless variator - Manual drill head height adjustment by hand crank, locking via clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment by hand crank - Mounting surface at machine base: 600 x 550 mm Drill head height top: 3020 mm Drill head height bottom: 2520 mm Required space (L x W x H): 1400 x 780 x 2520 mm Weight: 1600 kg Good condition Lodpfxsqa Txqo Ahusac

Stanje: rabljeno, Radialni vrtalni stroj WEBO tip R4bR Ledpfou T Ty Hox Ahueac Tov. št. 15 / E195 Leto izdelave ca. 1965 Moč vrtanja: 50 mm Stožec vretena: MK 5 Največji izteg vretena: ca. 1250 mm (do stebra) Pritrdilna površina: 1400 x 1000 mm Premer stebra: 315 mm Število vrtljajev vretena: 30 - 1325 vrt/min, 9 stopenj Pomik: 0,12 - 2 mm/obrat, 9 stopenj Priključitev na električno omrežje: 380 V, 50 Hz - Število vrtljajev vretena v 9 stopnjah - Motorizirano nastavljanje višine roke Potrebni prostor za uporabo (D x Š x V): 220 x 100 x 285 cm Potrebni prostor za transport (D x Š x V): 220 x 100 x 260 cm (brez motorja za nastavitev višine) Teža: ca. 2,8 t

Stanje: rabljeno, Radial drilling machine with platen table WEBO type HRH 100 / 3000 Machine no. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity Ø 100 mm in ST 60 at feed 0.5 mm/rev Nominal arm reach 3000 mm Maximum arm reach max. 3100 mm Spindle taper MT 6 Spindle speed 22.4 - 1600 rpm, 36 steps Feed 0.05 - 2.5 mm/rev, 18 steps Distance spindle - base plate 970 - 2335 mm Quill stroke 325 mm Laodpfx Ahefbt Huouoc Boom swing range 360° Travel on bed, bed length 7500 mm Clamping surface of platen field 8000 x 2100 mm - Electric central clamping - Drilling unit movable longitudinally on the machine bed by electromotor - Platen field made of 2 clamping plates with 7x T-slots (length 4000 x width 2100 x plate thickness 360 mm) Required space (L x W x H) 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 t Transport dimensions platen field (L x W x H) 4000 x 2100 x 900 mm (2 plates stacked) Transport weight platen field approx. 14 t Good condition

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 331/43, Drilling capacity: 3 mm Ljdpfsfnbgqox Ahuoac Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Dimensions (L x W x H): 470 x 250 x 520 mm Weight: 39 kg

Stanje: zelo dobro (rabljeno), Stolna vrtalna stiskalnica Proizvajalec: WEBO Tip: V 5 Morsejev stožec: MK 3 Ljdpjywhu Defx Ahusac Vpenjalna miza: 470 x 380 mm Največja vgradna razdalja od mize do vrtalne vretena: 900 mm Izvenos: 300 mm Brezstopenjska regulacija hitrosti: min 125, maks. 1080 3 avtomatski pomiki: 0,1 - 0,2 - 0,3 mm/obrat Hod pinole: 170 mm Napetost: 380 V Moč: 1,5 kW Tok: 3,5 A Dodatna oprema: Vrtalna glava 3–16 mm Sistem za hlajenje Stroj je v zelo dobrem stanju Transportne mere: Dolžina: 900 mm Širina: 700 mm Višina: 2260 mm Teža: 630 kg

Stanje: rabljeno, Leto izdelave: 1976, Iztek 1450 mm Vpenjanje MK 4 Kocka: da Teža stroja pribl. 3 t Lodpfx Asyn R N Dohuoac

Stanje: dober (rabljeno), Pillar drilling machine, Bench drilling machine, Column drilling machine, Upright drilling machine - Manufacturer: Webo, pillar drilling machine - Motor: 0.37 kW - Transmission: via flat belt - Table size: 295 x 295 mm - Drill chuck: 0 - 10 mm / B12 - Quill stroke: 70 mm - Throat depth: 150 mm - Column diameter: 80 mm - Dimensions: 500/700/H1800 mm Ljdpfx Aefv Ungshusac - Weight: 244 kg

Stanje: rabljeno, Speed / rpm Reach / mm Ljdpfx Ahoithz Ueueac Motor power / kW More information will follow shortly.

Stanje: rabljeno, Leto izdelave: 1980, Year of manufacture is approximate: 1980 Spindle taper: Morse taper Rotational speed: 205 - 1450 rpm Drilling capacity: 3 - 40 mm +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Furthermore, our listing contains the most informative photos in the best possible quality. Unfortunately, sending additional images is not possible. +++++ Lasdjr Dv Tgepfx Ahuec

Stanje: dober (rabljeno), T-slot clamping plate from a radial drilling machine Dimensions (L x W x H): 2500 x 1130 x 260 mm T-slot width: 20 mm Number of T-slots: 3 pcs. Lodsv N Et Nepfx Ahuoac T-slots are not continuous over the full length Weight: approx. 2 t Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, Vrtalna zmogljivost v jeklu (premer): 40 mm Domet: 1600 mm Vrtalna zmogljivost v liti železo: 60 mm Ljdpfx Ahjyrtxvjuoac Premer vretena: 85 mm Vpenjalna glava: MK 5 Število obratov: 24 - 1050 o/min Pomiki: 0,06 - 1,0 mm/obrat Premer stebra: 345 mm Navpična nastavitev izteznega nosilca: 900 mm Naprava za rezanje navojev: da Vrtalni motor: 5,5 kW Skupna potrebna moč: 7,5 kW Teža stroja ca.: 4000 kg Prostorske zahteve ca.: 2,5 x 1,0 x 2,99 m Radialni vrtalni stroj - Vpenjalna kocka 750 x 500 x 500 mm - Digitalni prikazovalnik gibanja izteznega nosilca - Hladilna naprava - V dobrem stanju

Stanje: rabljeno, Svedralna zmogljivost v jeklu (premer): 40 mm Izvlek: 380 mm Vrtalni hod: 160 mm Vpenjalni stožec: MK 4 Območje obratov: 60 - 1250 min⁻¹ Skupna potrebna moč: 3,3 kW Teža: 900 kg Oprema: - Reduktorski vrtalni stroj v robustni izvedbi Lasdpsxddtysfx Ahusc - Stolpec vodena vrtalna miza - Desni/levo tek - Napredovanje - Hladilna naprava

Stanje: rabljeno, Twin-spindle drilling machine, gang drilling machine, drill press, pedestal drill, upright drilling machine, column drilling machine Lajdod Tm Hnopfx Ahuec - Spindle taper: MT2 - Motor: 1.2/0.85 kW - Table size: 1175 x 355 mm - Throat depth: 255 mm - Speeds: 125 - 1400 rpm - Spindle travel: 125 mm - Dimensions: 1345/960/H1900 mm - Weight: 1212 kg

Stanje: rabljeno, Drilling capacity in steel (diameter): 23 mm Throat depth: 310 mm Drilling stroke: 150 mm Spindle speed: 90 - 2000 rpm Table size: 420 x 360 mm Total power requirement: kW / Volt Machine weight approx.: 650 kg Dimensions (L x W x H): 1.2 x 0.8 x 2.4 m Lodpfx Ahovkixreusac Bench drilling machine - Left/right rotation - Feed - Base frame