Namizni vrtalnik

WEBO Gradua 23

Stanje: rabljeno, Number of spindles: 90-2000 Drilling capacity in steel (diameter): 23 mm Machine weight approx. 2.5 t Required space approx. 2000 x 1100 x 2450 mm Ndsdpfx Abevwgqxj Iod This WEBO multi-spindle drilling machine is in good condition and available immediately.

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 8.700 h, * New Holland Kobelco E235 BSR-2 zero tail swing crawler excavator * Year of manufacture: 2008 * 8,700 operating hours * Approx. 28,500 kg operating weight * 118 kW HINO engine * All hydraulic lines installed Ndedjwap R Sjpfx Ab Ied * Automatic climate control * MS21 mechanical quick coupler * Pre-equipped for Oilquick * Dozer blade * Adjustable undercarriage * Undercarriage width: 3 m * Rear-view camera

Stanje: rabljeno, Number of spindles: 4 Nedpfx Aet Hw U Nsb Ijdd Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m

Stanje: rabljeno, Leto izdelave: 1978, Drilling capacity in steel (diameter) 40 mm Throat depth 345 mm Quill stroke 200 mm Table clamping surface 720 x 560 mm Spindle speed 60 - 765 rpm Feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Tool holder MT 4 Total power requirement 3.0 kW Machine weight approx. 0.4 t Drilling machine equipped with: Feed 2 gear stages Ndjdpjv Ehftjfx Ab Iod Forward/reverse operation Foot switch Coolant pump Machine lamp

Stanje: novo, Gear-driven milling and drilling machine Fervi T047/400VDA with tapping unit, 400V 1.5kW, NEW MANUFACTURE “CE” The machine can be used for the following operations: - Milling - Drilling - Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Maximum drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with insert face mill: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill travel: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Headstock tilting: ± 60° Spindle speed (12): 75 ÷ 3,200 rpm Three-phase motor: 400 V, 50 Hz, 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot width: 12 mm Njdsg Npiwjpfx Ab Ijdd Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 331/43, Drilling capacity: 3 mm Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Drive motor: 380 V, 0.18 kW Njdpfx Absfnbgqo Isdd Dimensions (L x W x H): 470 x 250 x 520 mm Weight: 39 kg

Stanje: rabljeno, Leto izdelave: 1967, Drilling capacity in steel (diameter): 28 mm Throat depth: 290 mm Nsdpfx Aewlvkcsb Iedd Drilling stroke: 160 mm Table clamping surface: 620 x 470 mm Spindle taper: MT 3 Spindle speeds: 80 – 1420 rpm Quill feed: 0.1 – 0.2 – 0.3 mm/rev Drill spindle diameter: 40 mm Height-adjustable table: 562 mm Table swivels: 360° Distance spindle/table: 79 / 641 mm Machine weight approx.: 0.5 t Machine dimensions (L x W x H): 0.70 x 0.40 x 1.80 m - Machine from training workshop -

Stanje: novo, Optimum OPTIdrill DH 40G Universal Column Gear Drilling Machine 3034356 TECHNICAL DATA Dimensions and Weight Length (product) approx. 590 mm Width/Depth (product) approx. 700 mm Height (product) approx. 2050 mm Weight (net) approx. 320 kg Drilling Capacity Drilling capacity in steel (S235JR) 32 mm Continuous drilling capacity in steel (S235JR) 25 mm Thread cutting in steel (S235JR) M16 Drilling Table Drilling table work surface length 500 mm Drilling table work surface width 460 mm Drilling table T-slot size 14 mm Drilling table load capacity 50 kg Speed Range Speed range 95 – 3200 rpm Number of speed stages 2 x 6 steps Electrical Data Drive motor power 1.1 / 1.5 kW Connection voltage 400 V Mains frequency 50 Hz Nedpfx Abet N Ri Eo Iodd Spindle Quill stroke 120 mm Spindle taper MK 4 Throat 280 mm Drill head rotation 45° Drill head swivel 360° Manual quill feed Drill head height adjustment 265 mm SCOPE OF DELIVERY Key-type drill chuck 1-13 mm / B16 Taper adapter for drill chuck MK4/B16 Drawbar M16 Adapter MK4-MK3 Operating tools

Stanje: novo, Optimum OPTIdrill DH 18V Set Bench Drill 3020220SET Supplied as a set with machine vice. Features a powerful OPTIMUM brushless drive and electronically adjustable speed control. Key feature – intuitive menu navigation for drilling and tapping operation modes. TECHNICAL DATA Dimensions and Weight Column diameter: 60 mm Length (approx.): 552 mm Width/Depth (approx.): 445 mm Height (approx.): 850 mm Net weight (approx.): 64 kg Drilling Capacity Maximum drilling capacity (steel S235JR): 18 mm Continuous drilling capacity (steel S235JR): 16 mm Tapping capacity (steel S235JR): M10 Drill Table Drill table working area length: 230 mm Drill table working area width: 245 mm Drill table T-slot type: diagonal Drill table T-slot size: 12 mm Drill table rotation: 360° Max. distance spindle – table: 370 mm Speed Range Speed range: 100 – 6000 rpm Number of speed ranges: 5 Speed control: electronic Electrical Data Total connected load: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Nsdpfx Ast N Rilsb Isdd Machine Base Max. distance spindle – base: 485 mm Machine base working area length: 220 mm Machine base working area width: 240 mm Machine base T-slot size: 12 mm Number of T-slots (base): 2 Distance between T-slots (base): 80 mm Spindle Quill stroke: 65 mm Spindle taper: MT2 Throat depth: 130 mm SCOPE OF DELIVERY Keyless drill chuck 1 – 13 mm Morse taper MT2 T-slot nuts

Stanje: rabljeno, Leto izdelave: 1978, Drilling capacity in steel (diameter): 28 mm Nedjwk N Raepfx Ab Iedd Throat depth: 290 mm Drilling stroke: 180 mm Table clamping surface: 515 x 300 mm Spindle taper: MT 3 Spindle speeds: 65 – 1,750 rpm Drill spindle diameter: 40 mm Table height adjustment: 562 mm Table swivel range: 360° Distance spindle/table: 79 / 641 mm Machine weight: approx. 0.4 t Machine dimensions (L x W x H): 0.70 x 0.40 x 1.80 m - Machine from training workshop -