Stebrna vrtalni stroj B12

Webo B12

Stanje: dober (rabljeno), Drilling machine, pillar drilling machine, column drilling machine -Manufacturer: Alzmetall, column drilling machine type AB5/S -Motor: VKS, 3 kW -Speeds: 40 - 800 rpm, stepless, reversible (right/left rotation) -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev -Table size: Ø 500 mm, travel 470 mm -Spindle taper: MK5 -Spindle stroke: 240 mm -Throat: 380 mm -Column diameter: 220 mm -Dimensions: 1450 x 680 x H2160 mm Rcodpfsr Ngp Uox Anpeh -Weight: 1262 kg

Stanje: dober (rabljeno), FLOTT E-3 Column Drilling Machine Rodjric Tbepfx Anpjch Throat depth: 260 mm Drilling stroke: 125 mm Speed range: 125 - 2,500 rpm Clamping table dimensions: 420 x 340 mm Column diameter: 110 mm Tool holder: MT3

Stanje: rabljeno, Column-type box stand drilling machine WEBO Serial No: 132 Machine No: 9 Drilling capacity: 50 mm Spindle taper: MK 5 - long quill Throat depth: 430 mm Spindle stroke: 280 mm Drill head height adjustment: 500 mm Rcsdpfx Anoqa Txqopjh Table size: Ø 725 mm Distance spindle to table: max. 740 mm Distance spindle to mounting surface on machine base: max. 1240 mm Spindle speed: 55-820 rpm Feed rate stage 1: 0.13 - 0.2 - 0.27 - 0.4 mm/rev Feed rate stage 2: 0.6 - 0.83 - 1.17 - 1.8 mm/rev Column diameter: 300 mm Motor power: 2.8 / 3.6 kW, pole-switchable Power supply: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and stepless variator - Manual drill head height adjustment by hand crank, locking via clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment by hand crank - Mounting surface at machine base: 600 x 550 mm Drill head height top: 3020 mm Drill head height bottom: 2520 mm Required space (L x W x H): 1400 x 780 x 2520 mm Weight: 1600 kg Good condition

Stanje: rabljeno, Leto izdelave: 1990, Zmogljivost vrtanja v jeklo (premer) 3 - 16 mm Največja višina vpenjanja 1500 mm Teža 300 kg Zmogljivost vrtanja: pri ST 60: 3,5 mm - 16 mm Ø pri GG-20: 3 mm - 16 mm Ø +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega predstavitev pod napetostjo ali izdelava videoposnetka ni možna. Rsdpshmribefx Anpoch Naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Pillar drill, column drill, upright drill press, bench drill - Delivery: as is, as inspected - Motor: HEW 0.8 kW - Table size: Ø 355 mm Rcjdpfx Ansfla Rijpeh - Spindle taper: MK3 - Travel distance: 500 mm - Throat depth: 300 mm - Column diameter: Ø 110 mm - Spindle stroke: 150 mm - Transmission: via V-belt - Dimensions: 850/500/H1850 mm - Weight: 294 kg

Stanje: pripravljen za uporabo (rabljen), Drilling capacity in steel/cast iron: approx. 25 mm Spindle taper: 2 MT Throat depth: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Required space: 800 x 400 x 1800 mm Rcodpsv Du Raefx Anpoh Weight: approx. 280 kg

Leto izdelave: 1965, stanje: rabljeno, Drilling diameter: 30 mm Total power requirement: 0.74 kW Machine weight approx.: 0.35 t Drilling capacity in steel (diameter): 30 mm Throat depth: 300 mm Rcedpfxsm Sg Tbj Anpsh Drilling stroke: 120 mm Spindle taper: MT 3 Table size: 335 x 280 mm T-slot width: 14 mm Table height adjustment: 510 mm Max. distance spindle/table: 120 - 630 mm Base plate dimensions: 380 x 400 mm Distance spindle/base plate: 1160 mm Drilling speed range: 200 - 2500 rpm Spindle speed stages: 4 Column diameter: 100 mm Machined base plate: Yes Table rotation: approx. 180° Space requirement approx.: 0.9 x 0.4 x 1.9 m Control: conventional

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1975, Column drilling machine Manufacturer: CORDIA Type: S-18 Year approx. 1975 Drilling capacity in steel: max. 18 mm Spindle taper: MK2 Spindle speeds: 90 - 1450 rpm Spindle stroke: 120 mm Table: 350 mm x 400 mm clamping area; 270 mm x 320 mm Redohtri Eopfx Anpjch Required space: Width 420 mm, Depth 650 mm, Height 2000 mm Weight: approx. 350 kg Machine is ready for operation.

Stanje: rabljeno, Used column drill by Ixion Speed range: 400–3000 rpm MK2 spindle taper Rcjdpjhcr I Eefx Anpjh Drilling capacity up to max. 18 mm

Stanje: dober (rabljeno), Hidravlična enota, hidravlična črpalka, univerzalna enota, hidravlična postaja, - Hidravlična enota: z hidravličnim rezervoarjem - Enota: žal brez oznake tipa - Hidravlični rezervoar: prostornina približno 7 l, z merilnikom tlaka povratka - Tlak: bar - Pretok: l/min - Posamezne komponente: glejte slike Rjdpjhvfy Uofx Anpech - Dimenzije: 350/240/V570 mm - Teža: 15,1 kg