Radialni vrtalni stroj

WEBO BR 32 V

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Bdjdpfx Aern Riqsfqjk Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: novo, Leto izdelave: 2024, Tank rotator with 10-ton load capacity Dual synchronized drive Axle spacing steplessly adjustable via threaded spindle Speed steplessly adjustable with foot remote control For diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed: 200 – 1,200 mm/min. Bdodjifk Rbspfx Afqek

Stanje: rabljeno, Leto izdelave: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm – min. 100 mm Y-axis travel: max. 1000 mm – min. 100 mm Bodpfogvkkzsx Afqodk Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Material thickness: max. 60 mm – min. 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC plate drilling machine HMB PBM1000/60 - W12 for drilling end plates and base plates in steel construction, equipped with automatic tool changer (12 positions) Number of drilling spindles: 1 Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Stanje: rabljeno, Leto izdelave: 2001, Tip diameter: 1000 mm Root diameter: 50 mm Module – max.: 18 mm Module – min.: 1 mm Bdsdpfxewp S Tho Afqek Wheel diameter – max.: 1000 mm Wheel width: 630 mm Max. profile height: 41 mm Helix angle (left/right) max.: 45° Table diameter: 720 mm Max. table load: 1500 kg Grinding wheel diameter min./max.: 180 / 400 mm Grinding wheel width: 60 (45/30) mm Grinding spindle speed: 0 – 3100 rpm Total connected load: 30 kVA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an excellent price-performance ratio thanks to its standard quill feed. The dovetail guide on the gear head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed: (12) 50 - 2520 rpm Spindle taper: MT 4 Quill stroke: 120 mm Quill feed: (3) 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle / table: 40 - 485 mm Bdodsvutw Hepfx Afqjk Travel (x / y): 550 / 190 mm Vertical adjustment of milling head: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Approx. weight: 285 kg Standard features include automatic quill feed and thread cutting device Large speed range 50 - 2520 rpm (12 steps) Dovetail guideways for x, y, and z axes, adjustable via gib strips Versatile applications: slot milling, face milling, boring, etc. Heavy-duty, large cross table, precision-ground surface Milling: quill feed via handwheel Drilling: quill feed via handwheel High-quality aluminum motor, designed for continuous operation Sturdy and vibration-free cast iron construction Quick and easy speed changes using shift lever Tilting milling head for angle drilling, bevel milling, etc. Location: Ex-stock 54634 Bitburg - Available at short notice -

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Bedpfx Afeqwgzqeqjdk Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, Stroj za uravnoteženje kardanskih gredi BVI-03-74 Na voljo na zalogi na Poljskem!!! Dobavni rok: en dan!!! Stroj za uravnoteženje gredi do mase 150 kg in dolžine do 4700 mm. Primeren za manjše delavnice s širokim spektrom kardanskih gredi, vključno z gospodarskimi vozili. Ta uravnoteževalni stroj je zasnovan za visoko produktivnost in služi uravnoteženju kardanskih gredi osebnih in tovornih vozil. Zagotavlja enostavno uravnoteženje kardanske gredi zaradi številnih tehničnih rešitev, hkrati pa ima dostopno ceno, kar zmanjšuje vaše finančno breme in omogoča učinkovito rast vašega podjetja. DVA KRAT hitrejši od vaše trenutne opreme. Ta uravnoteževalni stroj omogoča kakovostno in hitro uravnoteženje gredi. Če lahko delate 2–2,5-krat hitreje, je to vaša prava konkurenčna prednost. VISOKO UČINKOVITI PRIBOR Stroj je opremljen s tremi glavnimi tipi adapterjev: 1. Hitro-vpenjalni univerzalni adapterji. Dve glavni prednosti: Zaradi posebne zasnove je prirobnica kardanske gredi vpeta v 5 sekundah – brez vijačenja. To pomeni, da lahko gred vpetje izvedete 4-krat hitreje. Druga prednost so centrirni obroči. Gred se namesti v adapterje s centrirnimi obroči, ki jih je mogoče izdelati na navadnem stružnem stroju za najpogostejše velikosti. 2. KV-prirobnični adapterji. Uporabljajo se za uravnoteženje gredi s križno-zobimi prirobnicami, na štiri dimenzije: 120, 150, 180, 205 mm. Običajno za tovorna vozila. 3. Adapter z režami. Za montažo različnih prirobnic z izvrtinami; pritrditev gredi kot pri univerzalnih adapterjih, s centrirnimi obroči. KLJUČNE LASTNOSTI • Uravnoteženje 2-, 3- in 4-nosilnih kardanskih gredi • Dolžina do 4700 mm, masa do 150 kg • Montaža kardana v 1 minuti Bodpfx Aepbv Tfofqodk • Standardni set adapterjev – za 80 % vseh kardanskih gredi • Trije načini pritrditve sredinskega ležaja • Stroj s prožnim ležiščem – visoka občutljivost na vibracije • Upravljanje z enim delavcem • Drsna ležišča – hitra menjava, udobno delo • Varnostni nosilec s hitro vpenjalno sponko • Merjenje v vseh ravninah hkrati • Umerjanje stroja s strani upravljavca • Prikaz neravnotežja v realnem času • Izdelava in tiskanje poročil TEHNIČNE SPECIFIKACIJE Največja masa kardanske gredi: 150 kg Največji premer prirobnice: 300 mm Največja dolžina kardanske gredi: 4700 mm Število nosilcev stroja: 4 Število hkrati merjenih ravnin: 2, 3, 4 Minimalno dosegljiva preostala specifična neuravnoteženost: 10 g mm/kg Obratovalno območje hitrosti rotorja: 1000–2000 vrt/min Napajanje: 380V, 3-fazno, 50 Hz Minimalna moč: 2,2 kW Dimenzije (d/š/v): 6000 х 1100 х 1450 mm Teža: 700 kg Izdelujemo celoten nabor opreme za uravnoteženje in servis kardanskih gredi. Za najboljšo ponudbo nas kontaktirajte!

Stanje: novo, Cutting diameter: 225 mm Bedpfx Aonlbmzsfqodk Saw band length: 2,480 mm Maximum cutting width: 245 x 150 mm Voltage: 230 V Drive power: 1.5 kW Saw band dimensions: 2,480 x 27 x 0.9 mm Mitre cuts: 0 – 60° Cutting speed: 20 – 90 m/min Machine weight: approx. 185 kg Space requirement: approx. 1.4 x 0.69 x 1.7 m NEW MACHINE PRICE: €2,459.00 + VAT - Infinitely variable speed control - Infinitely variable feed rate - Mitre cutting function - Bi-metal saw band - Material stop - Machine base - Coolant system

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) Bodjhhm Edepfx Afqodk - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg Bdjdpfsfxw H Aex Afqjk - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control