Voziček za prevažanje kril in okvirjev

COMALL CARR 900-93/15 Q

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Kdodpfx Aezbb Rreh Ueu

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: Kdjdpfxeyy A Iqe Ah Usu ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication Kodeuiy Ngepfx Ah Uedu - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Support up to cutting line: Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Kedpfxsu R Syis Ah Uedu Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG Kdjdpfx Aeh H Iyxeh Uju consisting of: Machining center Unirex 3000 Univar 15 Unitex 15

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: Kodpfx Ahjfzzhyo Uodu - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Total price: €17,000. Condition: very good!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Rezalno središče za standardne profile, okvirje in pragove za dvižno-drsna vrata, Thorwesten ASZ 3.2M v posebni izvedbi. Kedpezhi Nhsfx Ah Uedu Dolžina obdelave 6.500 mm za standardne profile, okvirje in pragove za dvižno-drsna vrata, sistem Veka 82. Opremljeno s podaljšanimi transportnimi trakovi za vnos in iznos materiala. Dvžna in vodila kolesa pod pogonskim pasom za brezhiben transport okvirjev za drsna vrata. Neprekinjeno nastavljivi koti rezanja od 22,5° do 157,5°. Avtomatska optimizacija in obdelava ostankov materiala. Premer žaginega lista 500 mm. Vključuje sesalni sistem in transportni trak za odpadke. Nastavljeno za profilni sistem Veka, vključno z možnostjo razširitve in uporabo posebnih profilov. Polno HD-plošča z operacijskim sistemom Windows 10.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard Kdodpfxsh Ek Daj Ah Usu - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Ksdpfegxi D Tex Ah Uedu Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre band saw - Mitre cuts up to 60° to the left - Vise with quick-release mechanism - Band tension control - Electric cooling system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Ustreza CE standardom • Kotni stiskalnik, zasnovan za spajanje aluminijastih profilov pod 90 stopinjami • 2 zgornja stiskalnika in gibanje rezil sta hidravlična • Sistem milimetrskega merila za nastavitev višine in potiska rezil • Središčni kotni naslon je hidravličen • Gumb za izpust za natančno nastavitev • Priložena 2 rezila po 4 mm • Za delovanje hidravličnega stiskalnika in vpenjanje profila sta uporabljeni 2 pedali • Poliamidna plošča za zaščito površin profilov pred poškodbami Kdedpfx Aherbk Tfj Usu • Na voljo sta leva in desna roka za podporo profilu