Enostranski, višina 3,5 m, roke 1,20 m, 750 kg

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Iodpfx Ajddmq Toa Usia Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Stanje: novo, Leto izdelave: 2026, Technical data: • Extraction capacity approx. 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz Iedpfjd H Rf Tjx Aa Ueia • Extraction port 250/200 mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters: 28 • Dimensions: 752 x 1,982 x 2,144 mm • Weight: 300 kg • Filter category: G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filter, 5 microns • 2 containers • Mobile undercarriage • Filter cleaning with a vibration system and control unit + €850 for models equipped with a fire extinguisher (Safe System)

Leto izdelave: 2021, stanje: novo, Cantilever Racking, Double-Sided, 3.50m Height, 1.20m Arms, 500kg per Arm – NEW –: Price ex works including loading! 1 racking unit with 4 uprights: €2,899 (net)! Ijdpeddmtcsfx Aa Ueia Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can construct longer or shorter racking units (or by using different bay distances). The example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 3.50m high, hot-dip galvanized (IPE 160/80) - Each with 2 x 3 adjustable arms, 1.20m length, 500kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 3,500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with center of gravity at 600mm: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m - From bay width 1.50m upwards, a small surcharge applies to the listed price - Special dimensions (different bay distances) also available upon request, but with surcharge and longer lead time as these are custom-made If you do not specify a different bay width, the rack will be supplied with a bay width of 1.30m. In this configuration, a rack row with 4 uprights (3 bays) is approx. 4m long. Supplied with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2017, stanje: novo, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex works incl. loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, comprising: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Double-sided uprights approx. 3,500mm high, hot-dip galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright - With longitudinal and diagonal bracing, spacing = 1,300mm (standard is 1.30m). - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies! - Special dimensions (other column spacings) available on request; these incur a surcharge and have a longer delivery time as they are custom-made! Iisdpsddmtqofx Aa Uea - Unless otherwise specified, we supply the racking with a column spacing of 1.30m. For a rack row with 4 uprights (3 bays), total length is approx. 4m. - Supplied with all bolts and nuts (shipment within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: rabljeno, Mounting: MK 4 Iijdeb N Ezropfx Aa Uoa

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 500kg per arm – New - : Price ex location incl. loading! 1 rack unit with 4 uprights €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, you can also build longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay spacing). This example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided racking upright, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Foot and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity at 600mm load center: 500 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg, arms IPE 80 With longitudinal and diagonal braces, bay spacing = 1,300 mm (standard = 1.30m). Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge applies for bay lengths from 1.50m upwards! Special sizes (other bay spacings) are also available on request, but are subject to a surcharge and have a longer delivery time as they must be custom-made! If you do not specify a different bay spacing, the rack will be delivered with 1.30m bay spacing. With 4 uprights (3 bays), the total length is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service, direct from Würth), without floor anchors. Iodpfx Aaeddmpvs Ujia Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex location incl. loading! 1 racking unit with 4 upright frames €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! Iodpfxoddmp Ae Aa Usia You can also create longer or shorter racking units by omitting or adding frames or by choosing different pitch spacing. The example with 4 frames is simply the most common configuration! Cantilever racking system, hot-dip galvanized, comprising: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 height-adjustable cantilever arms each Load capacity with load centre at 600mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg, arms made of IPE 100 With longitudinal and diagonal bracing, e = 1,300 mm (standard 1.30m). Unless otherwise specified, the rack is supplied with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, and, for a small surcharge, 1.50m or custom sizes! In the standard configuration, the length of a rack row with 4 uprights is approx. 4,000 mm. Shipped complete with all bolts and nuts, floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. Iodpfxjiy Dw Hj Aa Uoia LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time.

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New equipment: Price ex location incl. loading! 1 racking unit with 4 uprights: €2,300 (net)! Iiedpfx Aeddmp Usa Uea Transport within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the centre distances), this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4,160 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each level with 3 height-adjustable arms Load capacity with 600 mm load centre: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces, centre distance = 1,300 mm (standard is 1.30 m – unless specified otherwise, the rack will be supplied with 1.30 m centre distance). Other distances possible, e.g. 1.0 m, 1.25 m for a small surcharge, also 1.50 m or custom measurements! Standard delivery length for a 4-upright racking row is approx. 4,000 mm. Delivered complete with bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW: Iisdpfxoddmqys Aa Uea Price ex location incl. loading! 1 racking unit with 4 uprights: €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also build longer or shorter racking units by omitting or adding uprights (or by using different bay widths), this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided upright frames approx. 5.18 m high, hot-dip galvanized - IPE 180 / 100 - Each with 2 × 3 adjustable arms, 1.20 m, load capacity 860 kg per arm - With bracing approx. 1.30 m - Double-sided uprights approx. 5180 mm high, hot-dip galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at load center 600 mm: 860 kg per arm / 2,600 kg per upright side - With longitudinal and diagonal bracing (bay width = 1.3 m, standard is 1.30 m) - Other standard bay widths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a bay width of 1.50 m, a minor surcharge applies to the listed price! - Special dimensions (different bay spacings) available on request, subject to surcharge and longer delivery time due to custom fabrication! - If no different bay spacing is specified, we supply the rack with a bay spacing of 1.30 m. - In this case, the total length for a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Spindle taper: MK 3 - short quill Distance spindle nose - table: 545 mm (short quill) Distance spindle adapter - table: 395 mm (with MK adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator - Intermediate stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Rotating drill table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Iijdpeharwvofx Aa Uja Space requirement (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Leto izdelave: 2021, stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! Iijdpfx Ajddmr Nsa Usa We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.