Cantilever rack, one-sided, 3m height, 1.20m

europaeischer Markenhersteller Kragarmregal, feuerverzinkt

Leto izdelave: 2021, stanje: novo, Cantilever Racking, Double-Sided, 3.50m Height, 1.20m Arms, 500kg per Arm – NEW –: Price ex works including loading! 1 racking unit with 4 uprights: €2,899 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can construct longer or shorter racking units (or by using different bay distances). The example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Bwsdpfx Ageddmtcs Eow - 4 double-sided uprights approx. 3.50m high, hot-dip galvanized (IPE 160/80) - Each with 2 x 3 adjustable arms, 1.20m length, 500kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 3,500mm high, hot-dip galvanized - Foot and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with center of gravity at 600mm: 500kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay width = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m - From bay width 1.50m upwards, a small surcharge applies to the listed price - Special dimensions (different bay distances) also available upon request, but with surcharge and longer lead time as these are custom-made If you do not specify a different bay width, the rack will be supplied with a bay width of 1.30m. In this configuration, a rack row with 4 uprights (3 bays) is approx. 4m long. Supplied with all screws and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: novo, Panel Saw HOLZ-HER 1255 SECTOR pro - Showroom Machine - Cutting Height: 2,200 mm Cutting Length: 5,300 mm Vertical Precision by HOLZ-HER HOLZ-HER's vertical panel saws combine proven technology from over 50 years of experience with a fundamentally robust construction, providing you with an exceptional price-performance ratio. Your advantages: - Completely welded frame for extremely high rigidity - Precise cutting quality - Finished cuts ready for immediate edge-banding - Powerful saw motor with 4 kW output - Space-saving panel sizing with a footprint starting at just 4 m² - Smooth and ergonomic operation TRK Extraction (mandatory in all CE-countries – optional): Workstations must meet the highest requirements for health and safety. HOLZ-HER saws are among the cleanest and safest in the world. Accessories The extensive range of accessories includes convenient digital measuring displays up to our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting board-shaped wood-based materials such as chipboard, MDF panels, veneered panels, multiplex, etc. Base Machine: Fully welded frame with extremely high rigidity. Precision guidance of the saw beam/saw unit for accurate cutting. Manual feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw Beam: Sturdy saw beam guided on precision rails. Pneumatic locking of the saw beam at top and bottom. Electrically monitored for vertical cuts. Saw Unit: Smooth and ergonomic operation for plunging in and out of the saw unit. The plunge lever can be folded back in the upper position for precise engagement. Generously sized levers for easy swiveling. The cover opens the entire saw unit for quick tool changes, including ProLock quick-release chuck. View Slot: Riving knife can be retracted. Control Panel: Efficient machine operation. Ergonomically mounted at eye level. Lower Workpiece Support: Stable, wear-free stainless-steel support. Support up to cutting line: Narrow workpieces cannot tip or fall through. Extraction: Efficient extraction system with two connectors: Saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lift Roller Transport System: Manually liftable and lowerable rollers for easy and material-friendly panel transport. Measuring Tape: For indication of horizontal cut with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Serial cuts from the panel upper edge This offer is for an equipment package. The following items and options are included in the price: - Shifting grid - Manual longitudinal stop for vertical cuts - Digital measurement display for horizontal cuts Bsdpfx Agsu R Syie Ejww - 3 adjustable stop points in the saw beam - TRK SH 2,200 extraction system - Strip stop for repeat horizontal cuts - New showroom machine -

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 750kg per arm – New: Price ex location incl. loading! 1 racking unit with 4 upright frames €1,988 (net)! Surcharge for cantilever arms with deflectors for this rack: €40 Transport costs within Germany (excluding islands): €430 (net)! You can also create longer or shorter racking units by omitting or adding frames or by choosing different pitch spacing. The example with 4 frames is simply the most common configuration! Cantilever racking system, hot-dip galvanized, comprising: Single-sided rack uprights approx. 3,000 mm high, hot-dip galvanized, IPE 160 Base and arm depth 1,200 mm with 3 height-adjustable cantilever arms each Load capacity with load centre at 600mm: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg, arms made of IPE 100 With longitudinal and diagonal bracing, e = 1,300 mm (standard 1.30m). Unless otherwise specified, the rack is supplied with a 1.30m pitch. Other pitches possible, e.g., 1m, 1.25m, and, for a small surcharge, 1.50m or custom sizes! Bsdpfxsddmp Ao Ag Eoww In the standard configuration, the length of a rack row with 4 uprights is approx. 4,000 mm. Shipped complete with all bolts and nuts, floor anchors not included. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2021, stanje: novo, One racking unit with 4 uprights €2,120 (net, excl. VAT)! Bwedpfoddmqnjx Ag Eew Surcharge for cantilever arms with deflectors for this rack: €40 Transport price within Germany (excluding islands): €490 (net, excl. VAT)! Of course, by omitting or purchasing additional uprights, you can also build longer or shorter rack units (or by using different bay spacings); this example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided uprights approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm, each level with 3 height-adjustable arms Load capacity at 600 mm load center: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal bracing, bay width = 1300 mm (standard is 1.30 m). Other standard lengths available from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! From a bay width of 1.50 m, a small surcharge applies in addition to the stated price. Special dimensions (other bay spacings) are available upon request, but these also incur a surcharge and have a longer delivery time, since they are custom-manufactured! If you do not specify a different bay spacing, we will supply the rack with a 1.30 m bay spacing. In that case, the length of a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all screws and nuts (shipping within Germany by parcel service directly from Würth), ground anchors not included. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us!

Stanje: novo, Bandsaw Bernardo HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw band dimension: 3607 x 25 x 0.6 mm – 3 TPI Saw band widths: 9.5 - 25.4 mm Cutting speed: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Saw table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output power S1 100%: 2.2 kW (3.0 HP) Motor input power S6 40%: 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight approx.: 162 kg Scope of delivery • Saw blade • Parallel fence with magnifier • Mitre fence • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor including brake • Push stick • Operating tools Bwodpfod N S Urex Ag Eew

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 860kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights: €4,185 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can also build longer or shorter racking units by omitting or adding uprights (or by using different bay widths), this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided upright frames approx. 5.18 m high, hot-dip galvanized - IPE 180 / 100 - Each with 2 × 3 adjustable arms, 1.20 m, load capacity 860 kg per arm - With bracing approx. 1.30 m - Double-sided uprights approx. 5180 mm high, hot-dip galvanized - Base and arm depth 1200 mm, each with 3 height-adjustable arms - Load capacity at load center 600 mm: 860 kg per arm / 2,600 kg per upright side - With longitudinal and diagonal bracing (bay width = 1.3 m, standard is 1.30 m) - Other standard bay widths available from stock: 1.0 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! - From a bay width of 1.50 m, a minor surcharge applies to the listed price! - Special dimensions (different bay spacings) available on request, subject to surcharge and longer delivery time due to custom fabrication! - If no different bay spacing is specified, we supply the rack with a bay spacing of 1.30 m. Bwodpfxeddmqyj Ag Eow - In this case, the total length for a rack with 4 uprights (3 bays) is approx. 4 m. Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), excluding floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Leto izdelave: 2021, stanje: novo, Cantilever racking, single-sided, 4.16m height, 1.20m arms, 750kg per arm – New equipment: Price ex location incl. loading! 1 racking unit with 4 uprights: €2,300 (net)! Transport within Germany (excluding islands): €550 (net)! You can also create longer or shorter racking units by omitting or purchasing additional frames (or by varying the centre distances), this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 100 Frames: IPE 160 Single-sided uprights approx. 4,160 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each level with 3 height-adjustable arms Load capacity with 600 mm load centre: 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg With longitudinal and diagonal braces, centre distance = 1,300 mm (standard is 1.30 m – unless specified otherwise, the rack will be supplied with 1.30 m centre distance). Other distances possible, e.g. 1.0 m, 1.25 m for a small surcharge, also 1.50 m or custom measurements! Standard delivery length for a 4-upright racking row is approx. 4,000 mm. Delivered complete with bolts and nuts, without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available on request! Please contact us! Bwedsddmp Uspfx Ag Eow

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. Bwodjh Ek Daopfx Ag Ejw The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 2017, stanje: novo, Cantilever racking, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex works incl. loading! 1 racking unit with 4 uprights: €3,210 (net)! Transport within Germany (excluding islands): €550 (net) A cantilever racking system, hot-dip galvanized, comprising: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160 / 100 - Each with 2 x 3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Double-sided uprights approx. 3,500mm high, hot-dip galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright - With longitudinal and diagonal bracing, spacing = 1,300mm (standard is 1.30m). - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies! - Special dimensions (other column spacings) available on request; these incur a surcharge and have a longer delivery time as they are custom-made! Bodpeddmtqefx Ag Esww - Unless otherwise specified, we supply the racking with a column spacing of 1.30m. For a rack row with 4 uprights (3 bays), total length is approx. 4m. - Supplied with all bolts and nuts (shipment within Germany via parcel service directly from Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types, etc.) available on request! Please contact us!

Leto izdelave: 2021, stanje: novo, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm – NEW –: Price ex works incl. loading! 1 rack unit with 4 uprights: €3,875 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, by omitting or purchasing additional uprights, you can build longer or shorter rack units (or by using different centre distances); this example with 4 uprights is simply the most common racking solution! Cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 5.18m high, hot-dip galvanized - IPE 180 / 80 - Each with 2x3 adjustable arms, 1.20m length, 500kg load capacity per arm - With cross bracing approx. 1.30m - Double-sided uprights approx. 5180mm high, hot-dip galvanized - Base and arm depth: 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity with load center at 600mm: 500kg per arm / 2,600kg per upright side - With longitudinal and diagonal bracing, centre distance = 1,300mm (standard is 1.30m) - Other standard bay widths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - For lengths from 1.50m, a small surcharge applies to the listed price! - Special sizes (different centre distances) available on request for an additional charge and longer delivery times, as they must be custom-manufactured! - If you do not specify otherwise, we will supply the rack with a centre distance of 1.30m. - In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. - Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), without floor anchors. Bodeddmq Tspfx Ag Eeww Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Photos show a similar rack!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO Bwjdpfxsxdr Rts Ag Ejw - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Leto izdelave: 2021, stanje: novo, The prices stated in this advertisement reflect the rates as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of raw steel is strained and currently unpredictable. Therefore, we kindly ask you to inquire about current prices and availability! We are happy to provide you with a current quotation! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm – NEW –: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Transportation price within Germany (excluding islands): €425 (net)! Of course, by omitting or purchasing additional uprights you can configure longer or shorter rack units (or adjust the axle spacing accordingly); this example with 4 uprights is just the most common rack solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 80 - Each with 2x3 adjustable arms, 1.20 m, load capacity 500kg per arm - With bracing approx. 1.30 m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized Bwjdpfxjddmr Ns Ag Eew - Foot and arm depth 1200 mm, each with 3 height-adjustable cantilever arms - Load capacity at load center 600 mm: 500 kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, axle distance = 1300mm, standard is 1.30m - Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From a length of 1.50m, a small surcharge applies to the quoted price! - Special dimensions (other axle spacings) are also available on request, but also incur a surcharge and have a longer delivery time as they must be specially manufactured! - If you do not specify a different axle spacing, we deliver the rack with an axle spacing of 1.30m. - In this case, the length for a rack row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany by parcel directly from Würth), without floor anchors.